PROLYCHT Orion 675 FS LED Monolight User Manual
- June 12, 2024
- PROLYCHT
Table of Contents
PROLYCHT Orion 675 FS LED Monolight
Product Information
Category| Product Name| Model| Weight| Power| Color Quality| Dimming| IP
Rating| Lifetime
---|---|---|---|---|---|---|---|---
Lighting| Prolycht Orion 675 FS LED Full Spectrum Spotlight| Orion 675 FS| 9.5
kg / 21 lbs without yoke, 12 kg / 26 lbs with yoke| 675 W Maximum| CRI Average
97, TLCI Average > 95, TM-30 Average >
94| 0~100% dimming, 1000 Steps, linear / exponential / logarithmic
/ Curve| High IP weather rated| 50,000 hours
Product Usage Instructions
Mounting & Handling:
The Prolycht Orion 675 FS LED Full Spectrum Spotlight can be mounted using a
28 mm Spigot. It comes with a Bowens S mount with extra strengthening
structures for added stability. Please ensure proper handling and follow the
weight specifications mentioned in the user manual.
Power Connection:
The product operates on a voltage input range of 100 – 240 v~, 50 – 60 Hz. It
is equipped with a powerCON TRUE1 TOP connection for mains power. Various
cable options are available (Bare Ends / Schuko / Edison, Japanese, Chinese
cables). Connect the appropriate cable to the power source for operation.
Color Control:
The Prolycht Orion 675 FS offers full color control with various options. It
supports seamless color tuning with an HSI color wheel and color tuning in
CIExy color space (Rec.709/Rec.2020/Full Gamut). It also allows for matching
46 natural/artificial light sources and emulating 318 Rosco/LEE Gels.
Additionally, it provides 19 lighting effects with tunable parameters and a
6-Pole Color Matrix Adjustment.
Dimming:
The product supports 0~100% dimming with 1000 steps. You can choose from
linear, exponential, logarithmic, or curve dimming options. Adjust the dimming
level as per your requirements.
Control Options:
The Prolycht Orion 675 FS can be controlled using various methods. It offers
DMX control with 27 DMX modes and supports LumenRadio CRMX wireless control.
It also has Ethernet/Art-Net, Bluetooth Mesh, and Wi-Fi capabilities. You can
use the built-in Art-Net ChromaLink App or third-party apps like Blackout and
Luminair for control.
Firmware Upgrade:
The product’s firmware can be upgraded via a flash drive. Follow the
instructions provided in the user manual to upgrade the firmware for improved
performance.
Operating Temperature:
The Prolycht Orion 675 FS is designed to operate in temperatures ranging from
-20 to +40 degrees Celsius. Ensure the product is used within this temperature
range for optimal performance.
IP Rating:
The product has a high IP weather rating, ensuring its resistance to dust and
water ingress. It is suitable for outdoor use and can withstand challenging
weather conditions.
Lifetime:
The estimated L70 lifetime of the Prolycht Orion 675 FS LED Full Spectrum
Spotlight is 50,000 hours. This indicates the duration until the light output
depreciates to 70% of its initial level. The product is designed for long-term
use.
EU Regulatory Conformance
- As certified by the qualified laboratory, the product is in compliance with the essential requirements and other relevant provisions of 2014/53/EU.
- Please note that the above information is applicable to EU countries only.
Introduction
Maximum power, maximum color. That’s precisely what the new Prolycht Orion 675 FS LED full spectrum spotlight delivers in a single robust fixture that is built for Film and TV professionals. The Orion 675 FS is The New Standard.
- RGBACL Hyperlight Color Engine for full spectrum color flexibility
- 1,800K-20,000K CCT Range
- Fresnel performance: Brighter than a 1.2K HMI, double a 2K tungsten
- Patent-Pending Positive Locking clamp for Bowens Mount
- DMX / Ethernet / Bluetooth Mesh / Lumen Radio CRMX (cognitive radio multiplexer) 2.4G Wireless DMX (Data Multiplexer )
- Color Adjustment modes: Warm-Cool & HSI / xy / 6-Color matrix
- Realtime color and brightness tracking control via free ChromaLink App
Specifications
| Light Aperture | 40 mm / 1.57”, without modifiers |
|---|---|
| Beam Angle | 80° Half Peak Angle, without modifiers |
Weight
| 9.5 kg / 21 lbs without yoke 12 kg / 26 lbs with yoke
30 kg / 66 lbs full loaded hard-rolling case
Mounting & Handling
| Quick-Release Angled Yoke with 360° Tilt Lock, 28 mm Spigot
Accessory Mount| Bowens S with extra strengthening structures
Optional attachment
| Fresnel Lens (15°-50°)
60” Dome softbox
35” Lantern softbox
Voltage Input Range| 100 – 240 v~, 50 – 60 Hz
Power| 675 W Maximum, Built-in power supply
Color Quality
| CRI Average > 97 TLCI Average > 95 TM-30 Average > 94
SSI: 84 @ 3200K, 74 @ 5600K
Mains Power Connection
| powerCON TRUE1 TOP
(Bare Ends / Schuko / Edison, Japanese, Chinese cables available)
Battery Connector| 3-Pin XLR Connector (Pin 1: Negative, Pin 2: Positive)
Battery Voltage Range| 46 – 50 vdc
White Light| Calibrated 1,800 K to 20,000 K with G/M adjustment
Color Control
| Full R+G+B+A+C+L Gamut Seamless color tuning with HSI color wheel
Color tuning in CIExy color space (Rec.709/Rec.2020/Full Gamut) Matching 46 natural/artificial light sources
Emulating 318 Rosco/LEE Gels
19 Lighting effects with tunable parameters 6 – Pole Color Matrix Adjustment
Communication
| DMX
LumenRadio CRMX wireless control Ethernet / Art-Net Bluetooth Mesh
Wifi
Dimming| 0~100% dimming, 1000 Steps, linear / exponential / logarithmic / Curve
Control Options
| Full Color Control panel
5-Pin DMX in/out, 27 DMX modes LAN port with Built-in Art-Net ChromaLink App
Support 3rd party App control: Blackout, Luminair, and more
Fan Mode| Silent, Low Noise, Medium Speed, High Speed, Auto
Firmware Upgrade| Firmware upgradable via Flash Drive
Operating Temperature| -20℃ to +40℃
IP Rating| High IP weather rated
Estimated L70 Lifetime| 50,000 hours
Photometrics
· Measured in lx
Light modifier
| Beam Angle|
CCT
| Distance(m)
3m/9.8ft| 5m/16.4ft| 7m/22.9ft
Bare Light
|
80°
| 5600K| 2,220| 830| 538
3200K| 1,900| 706| 458
55° Reflector
|
55°
| 5600K| 5,260| 1,980| 1,140
3200K| 4,400| 1,700| 973
30° Reflector
|
30°
| 5600K| 14,000| 4,400| 2,280
3200K| 11,800| 3,770| 1,950
Fresnel Lens (Flood)
|
50°
| 5600K| 9,110| 3,400| 1,860
3200K| 7,700| 2,930| 1,620
Fresnel Lens(Spot)
|
15°
| 5600K| 28,100| 9,810| 4,900
3200K| 23,900| 4,190| 4,190
Fresnel Lens(Medium)
|
30°
| 5600K| 18,108| 6,690| 3,390
3]| 15,300| 5,650| 2,890
PRODUCT SPECIFICATIONS
- BLE (Bluetooth Low Energy)
Intended Use / Category :| Non-Specific Short Range Device
---|---
|
Frequency range (MHz):| 2402~2480
Modulation :| GFSK
Antenna type and Gain:| FPC, 0.99 dbi - 2.4G Wireless DMX
Intended Use/Category :| Non-Specific Short Range Device
---|---
|
Frequency range (MHz):| 2402~2480
Modulation :| GFSK
Antenna type and Gain:| FPC,0.99 dbi
RF exposure information:
The Maximum Permissible Exposure (MPE) level is calculated based on a distance
of d=20 cm between the device and the human body. To maintain compliance with
the RF exposure requirement, a separation distance of 20 cm between the device
and the human should be maintained.
FCC Statement
**** “This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.”
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. §15.105 Information to the user.
For a Class A digital device or peripheral, the instructions furnished the user shall include the following or similar statement, placed in a prominent location in the text of the manual:
NOTE:
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
For a Class B digital device or peripheral, the instructions furnished the user shall include the following or similar statement, placed in a prominent location in the text of the manual:
NOTE:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons.
Caution:
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
© 2022 PROLYCHT Lighting Co., Ltd. All rights reserved.