EPSON ELPMB75 Ultra Short Throw Wall Mount User Guide

: June 12, 2024
: Epson

Table of Contents

EPSON ELPMB75 Ultra Short Throw Wall Mount
Product Information
Product Usage Instructions
Pre-assembly
INSTRUCTIONS
REQUIRED SCREWS
Installation
Using the Product Safely
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

EPSON ELPMB75 Ultra Short Throw Wall Mount

EPSON-ELPMB75-Ultra-Short-Throw-Wall-Mount-PRODUCT

Product Information

The ELPMB75 is a wall mount for securely mounting projectors. It is designed to provide optimum balance and stability for projectors weighing up to 15.0kg. The installation procedure is explained in detail in the user manual and installation guide.

Product Usage Instructions

Pre-assembly:
- Stick the template sheet in the installation position to determine the correct placement.
- Secure at least four points at the top, bottom, left, and right using the appropriate screws provided.
- Remove the template sheet once the mount is secured.
Installation :
- Mount the projector on the wall mount according to the installation guide.
- Adjust the position of the image on the screen using the menu settings of the projector.
Using the Product Safely:
- Do not use excessive force when adjusting the product to avoid breakage and personal injury.

NOTE : For more detailed installation procedures and safety precautions, please refer to the complete user manual and installation guide provided with the product.

ELPMB75 User’s Guide
Illustrations in this guide and the actual projector may differ.

Pre-assembly

$EPSON-ELPMB75-Ultra-Short-Throw-Wall-Mount-FIG- $1$$

INSTRUCTIONS

$EPSON-ELPMB75-Ultra-Short-Throw-Wall-Mount-FIG- $2$$

REQUIRED SCREWS

$EPSON-ELPMB75-Ultra-Short-Throw-Wall-Mount-FIG- $3$$

Installation

$EPSON-ELPMB75-Ultra-Short-Throw-Wall-Mount-FIG- $4$$

A. Stick the template sheet in the installation position. See the “Installation Guide” for more information on how to determine the installation position.
B. From the screw holes shown in the figure above, secure at least four points at the top, bottom, left, and right for optimum balance.
C. Remove the template sheet.

$EPSON-ELPMB75-Ultra-Short-Throw-Wall-Mount-FIG- $5$$ $EPSON-ELPMB75-Ultra-Short-Throw-Wall-Mount- FIG- $6$$ $EPSON-ELPMB75-Ultra-Short-Throw- Wall-Mount-FIG- $7$$ $EPSON-ELPMB75-Ultra-Short- Throw-Wall-Mount-FIG- $8$$ $EPSON-ELPMB75-Ultra- Short-Throw-Wall-Mount-FIG- $9$$

Press the [Menu] button, and then select [Installation] > [Setting Plate Installation Guide]. Adjust the position of the image according to the screen. $EPSON-ELPMB75-Ultra-Short-Throw-Wall-Mount-FIG- $10$$
For North American Users:
For Latin American Users:

This manual explains how to handle wall mounts and provides an overview of installation procedures. See the “Installation Guide” that you can access using the QR code on the right for more details.

Using the Product Safely

Warning

The Wall mount is exclusively for mounting the projector on a wall. If anything other than a projector is mounted, the weight may result in damage. If this product falls, it could cause death or personal injury.
The installation work (wall mounting) should be performed by specialists who have technical knowledge and ability. Incomplete or incorrect installation could cause the product to fall and cause personal injury or property damage.
When installing this product on a wall, the wall requires enough strength to hold the projector and the wall mount.
Ensure the strength of the wall before mounting this product on the wall.
If the wall is not strong enough, reinforce the wall before installation.
Do not use adhesives, lubricants, or oils to install or adjust the Setting plate.
Do not install in a location subject to oily smoke or smoke for events.
If oils and so on a stick to the slide plate fixing part of the projector, the case may crack and cause the projector to fall, resulting in personal injury or property damage.
Do not disassemble or remodel this product.

Caution