SCOSUHE Base Charge MS 3 In 1 MagSafe Compatible Folding Charge Stand User Manual
- June 12, 2024
- SCOSUHE
Table of Contents
3+in-1 MagSafe® Compatible
Folding Charge Stand 
INCLUDED ELEMENTS
A. MagSafe® Compatible Charger for iPhone 12 and Later
B. Charging Stand (folds for travel)
C. Wireless Charging Pad for Air Pods® Charging Case or Additional Wireless
Device
D. Cable Routing Channel
E. llluminated Base with Touch Control
F. Slide: On Holder for Apple Watche Magnetic Fast Charger to USB-C (charger
noninduced)
G. Power Adapter Input {48W power adapter with 5 cable included)
H. 15W USB-C Charge Port
I. MagicRing™ Adapter
J. Mounting Template
K. Cleaning Wipe
DEVICE SETUP
Getting Started
Unfold the charging stand (A). Connect the included power adapter to the unit
(B), and plug the adaptation a wall socket The unit will power on
automatically.
llluminated Base with Touch Control Touch anywhere on the stand’s neck (C) ‘1o
control the light as follows:
Turn light on/off:Tap once Increase decrease brightness: Tappan hold «
Hold5seonds for Koo igh o high o low Disable light feature: Tappan hold for 10
seconds gut il opt superfunction il enaled* “Enable light feature: Tap nd
holdoff S seconds T gut opt doe opt diatef the phoveischarging or damge. Use
the antisyndicate of the hones siren of checkage st
Slide-On Holder for Apple Watch®
Note: For use with Magnetic Fast
Chargerto USBC (not induded).
- Route the charger cable through the opening in the holder (A), and slide the holder onto the charging stand (B).
- Seat the magnetic charger in the holder (C), and route the charger cable into the guide channels in the holder and in the back of the stand (D).
- Plug the charger cableinto the USB-C pot(E).
USING BASECHARGE
MagicRing Installation on Non-MagSafe Devices
Case required. Manufacturing materials do not allow adhesives bond directy to the device.
Clean the surface of the case using th supplied wipe. Use included templated
accuratlypositon MagicRing on evice.
Foreign ObjectDetecon (FOD)
Metaobjects detected on either witelesscharger(stand or base)height
surroundings b wipe When e et s emmoved, ol functionoid e, “
Note: The FOD gut pate func ons evened tealight future hs been dialed
(eel previous section).
SPECIFICATIONS
Input/Ene | Entada: 12V== 4, 48W. ‘Wireless Puck / Paltsans i /Disco
inakdmbrico: 5W/ 7.5W / 10W.
Wireless Base/ Bsesnsl Baserlémbrico: SW1 7 5W 1 10W USBC: 5V—==3A,15W LED
Light/ Lumibe DEL/ iz L£D: 35W
FCC Compliance Statement
Tha dente complies with part 15 d the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. and (2) this device must accept array interference received. including interference that may cause undesired operation. Warning. changes or modifications to this product not expressly approved by the party responsible for compliance multi void the user’s authority to operate the Equipment This equipment has been tested and found to comedy with the limits for a Class 8 digital deem pursuant to part 15 of the FCC Rules. These limit are designed to provide reasonable probation aga nest Harrel interference in a residential i installation this equipment generates, uses and can radiate radio frequency energy and, if net installed and used in accordance with the instructions, may cause harmful inteference to radio communications Hooter, there is no guarantee that interference wile. not omit in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by taming the egiipment off and oh the user is encouraged to ay to correct the interference by one or more of the following measures
- Reorient or relocate the receiving arowana. – Increase the separation beaten the equipment and receiver
- Connect the equipment ‘moan outlet on a circuit different from that to which the receiver es connected.
- Consult the deakr or an reverenced racino/N technician br help. This equipmentcornetts with FCC radiatonowsure limits set teeth fa an uncoupled enrichment This equipment should be installed and operated with minimum distance 20an between the edit and you body. This transmitter must not be collocated or operating in conjunction with any other antenna or bansmitter.
Canadian Compliance Statement
this device contains hcenceeiempttra smatter(sorcerer(s) that competed [mover: ion, Science and Icon Cenk Devourment Ca names nonexempt RSS(s). Operation is subject to the following two conditioner (1) this device may not cause interference.(2) This device must accept any interference, including imminence that may cause undesired operation of the deface. This equipment complies wth IC FtSS-102 radiation exactable limits set forth for an uncontrolled enrolment This equipment should be installed and operated with minimum distance 20 cm between the rediaper art your body. This transmitter mug not be collocated or operating in conjunction with any other antenna or Incarnate
Base Charge MS HowTo Video…
https://qrco.de/bdgeV7
1550 Pacific Avenue **Oxnard, Califomia 93033
Phone:800-363-4490 x1/ 805-48¢-4450
x1
www.scosche.com
©2023 Scosche Industies
Scosche Baselyn e ademaks of Scsche Induste,
Othermasks orbands et prapert o e esective ounes.
Devise and/or appearance may
Designed in Oxnard, California SI MSas 423**
Documents / Resources
|
SCOSUHE Base Charge MS 3 In 1 MagSafe Compatible Folding Charge
Stand
[pdf] User Manual
Base Charge MS 3 In 1 MagSafe Compatible Folding Charge Stand, Base Charge MS,
3 In 1 MagSafe Compatible Folding Charge Stand, Compatible Folding Charge
Stand, Folding Charge Stand, Charge Stand
---|---