LG 27ART10AKPL ART10 Series 27 Inch StanbyME Wireless Portable Touch Screen Monitor Installation Guide
- June 12, 2024
- LG
Table of Contents
LG 27ART10AKPL ART10 Series 27 Inch StanbyME Wireless Portable Touch
Screen Monitor Installation Guide
LG 27ART10AKPL ART10 Series 27 Inch StanbyME Wireless Portable Touch
Screen Monitor
-
A Insert the stand base into the styrofoam groove as shown in the gure.
B Insert the bar into the hole of the stand base along the groove until it reaches the parting line.
C Secure the four screws.
-
Check the orientation of the power cable and cable holde
-
3Hold the screen and secure the power plug.
A Check the position of the power plug on the back cover of the screen.
B Secure it tightly to the back cover side.
-
Secure the screen to the stand.
A Insert the stand hook into the back cover groove and tighten while pushing the lower part, as shown in the gure. (Push it until you hear a [click] sound.)
B Secure one screw to the cable holder. -
Secure the ring cover of the stand.
A Align the screen back cover and ring cover [●mark] and install them.
B Check if it sits tightly as shown in the gure.
Disassembly
-
Position the screen verticall
-
Push the top of the screen lightly in the direction of the arrow to disassemble a part of the cover space.
-
Use a wedge or pull it with your hand to completely disassemble the cover.
-
Position the screen horizontally and disassemble the cable holder screw
-
Lower the rear lever and push the bottom of the screen forward, as shown in the figure
-
Lift the screen, separate the top of the screen, and hold the screen
-
Press the plug lock, push it in the direction of the arrow, and then disassemble the screen completely
-
8Lay the stand on the box packaging, remove the four screws, and then disassemble the stand bar.
