BCCI 28.1 Deep Canopy Instruction Manual
- June 4, 2024
- BCCI
Table of Contents
Instruction Manual
DEEP CANOPY 28.1
PRODUCT SPECIFICATION
PENDANTS:
MOUNTING:
LAMPING:
COAX:
MATERIALS:
WEIGHT:
POWER SUPPLIES:| one
deep brushed nickel canopy 116mm (4.5”) in diameter x 40mm (1.6”) deep
1.5w LED or 20w xenon
adjustable. 3000mm (10’) standard / up to 30500mm (100’) maximum
blown glass, braided metal coaxial cable, electrical
components brushed nickel canopy
approximately 1.3kg (3lb)
integral. Power supplies included
---|---
DESCRIPTION
The 28.1 is a single 28 pendant fixture with a deep brushed nickel canopy
designed to fi t over an existing junction box in which the power supply is
installed. The canopy is 116mm (4.5”) in diameter and 40mm (1.6”) deep. It is
designed for surface-mounted applications that cannot make use of a junction
box or ceiling cavity. The canopy is completely enclosed by a backplate, which
houses the power supply. The pendant drop lengths on this light fixture are
adjustable up to the specifi ed maximum.
28 is an exploration of specifi city in manufacturing. Instead of designing
form itself, here the intent was to design a system of making that yields
form.
Individual 28 pendants result from a complex glass blowing technique whereby
air pressure is intermittently introduced into and then removed from a glass
matrix which is intermittently heated and then rapidly cooled. The result is a
distorted spherical shape with a composed collection of imploded inner shapes,
one of which acts as a shade for the light source.
Standard 28s are made with clear glass exterior spheres and milk-white
interior lamp holder cavities. 28s are possible with infi nite versatility in
color compositions, sizes, and shapes.
NOTES
+ Purchase replacement lamps online at
www.bocci.com/shop/bulbs
+ Unless otherwise noted when ordering, all fixtures will be outfi tend to be
xenon compatible
US Patent # D687 ,7 40
EU Patent # 001695834-001 to 004
Made in Vancouver, Canada
| Vancouver | Berlin |
|---|
sales@bocci.com
www.bocci.com|
europe@bocci.com
www.bocci.com
-
Very carefully uncoil the braided coaxial cable in a spool-like manner. Insert your index fingers into opposite sides of the roll then rotate your fingers around each other to unroll the coaxial cable.
Use patience: allow the cable to uncoil completely to avoid kinks. -
Determine the overall drop for the pendant fixture.
-
Thread the coaxial cable through the canopy, use a 2mm Allen key to loosen the setscrew in the canopy, and gently feed the cable through until you have reached your desired drop length.
Use the Allen key to tighten the setscrew to hold the strain relief and secure the coaxial cable at its new length. Perform a gentle tug test to ensure it is secure.
DO NOT OVER-TIGHTEN.
Note: The strain relief is a black plastic collar around the coaxial cable. There is a single slot opening on the side of the strain relief component. It is essential that this opening is oriented at 90 degrees to set the screw chamber. There can be no contact between the set screw and the cable.
RISK OF ELECTRIC SHORT! -
Xenon (110V) or LED: connect the black wire to black and white wire to white wire.
Xenon (230V): connect black wire to brown wire and white wire to blue wire.
Connect the coaxial cable to the open slots in the terminal block on the 12V side of the power supplies.
For multiple pendants installations, ensure that the braided outer wires are all connected to one 12V output wire and all inner insulated wires are connected to the other or a short will occur.
Once all coaxial connections are made, lift the fixture into position and connect the line voltage to the open slot in the appropriate terminal block. -
The client is responsible to ensure fasteners are attached to a robust structural substrate.
Tuck the power supply and wiring into the canopy. Line up the fastener holes or connect directly to the structural ceiling surface using the fasteners provided.
Turn power to fixture on. -
Bocci lamps are included. Plug the lamp into the socket. Do not touch the lamp with your bare hands. Ensure power to the lamp is working correctly.
Remove the center cap from the 28 pendants. Install 28 pendants by sliding the center cap onto the coaxial cable, gently insert the lamp into the pedant, then tighten the center cap connection by
hand.
DO NOT OVER-TIGHTEN.
Remove the protective film from the center cap after assembly.
Note: when using a dimmer use only a low voltage electronic dimmer. -
Clean fingerprints from surfaces.
For additional assistance, please contact Bocci:
PRODUCT INSTALLATION INSTRUCTIONS
Vancouver
sales@bocci.com
www.bocci.com
Berlin
europe@bocci.com
www.bocci.com
US Patent # D687 ,7 40
EU Patent # 001695834-001 to
004
Made in Vancouver, Canada
© 2021, Bocci Design and Manufacturing Inc.
All rights reserved.
Any inquiries should be directed to: info@bocci.com