Husqvarna 596 28 87-01 Sweeper Instruction Manual

Husqvarna 596 28 87-01 Sweeper

Product Information

• Product Name : Sweeper
• Model Number : N/A Brand:
• Husqvarna Manufacturer: N/A Product Type: Mechanical Sweeper
• Weight : 75 kg
• Dimensions : – Length: 1320 mm – Width: 1200 mm –
• Height : 1350 mm Rotation Speed: 200 rpm Product Usage Instructions:

Assembly:

• Refer to the user manual for detailed assembly instructions.
• Attach the mounting frame to the sweeper body using the provided screws and nuts.
• Install the brush roller onto the mounting frame and secure it with the roller shaft.
• Connect the drive shaft to the roller shaft using the chain.
• Cover the chain with the chain cover plate.
• Attach the upper angle control tube and cover tube to the sweeper body.
• Ensure all parts are securely fastened before proceeding.

Operation:

• Before using the sweeper, ensure that the area to be cleaned is clear of any obstacles or debris.
• Start the sweeper by turning on the power switch.
• Push or pull the sweeper along the desired surface, allowing the brush roller to collect dirt and debris.
• Adjust the height of the sweeper using the grip adjusting knob to effectively clean different surfaces.
• If necessary, empty the collected dirt and debris from the sweeper’s collection container.

Maintenance:

•  Regularly inspect the sweeper for any signs of damage or wear.
• Clean the brush roller and remove any tangled debris.
• Lubricate moving parts, such as the roller shaft and drive shaft, as recommended in the user manual.
• Replace any worn-out or damaged parts with genuine spare parts from Husqvarna.
• Store the sweeper in a dry and secure location when not in use.

Note : For more detailed instructions and safety precautions, refer to the provided user manual.

SYMBOLS

The following symbols can be found on the machine to remind you of the care and attention that are required during use. The symbols mean:

Warning!
Read the instruction manual and the safety manual before using the machine.

Warning!
Keep hands and feet away from the rotating parts of the machinery.

Warning!
Watch out for discarded objects. Keep onlookers away.

Warning!
Before starting repair work, remove the spark plug cable from the spark plug.

Warning!
Never use the machine with damaged protections or without the safeguards fitted in place.

SAFETY REGULATIONS

• These regulations should be read carefully by everyone using the machine.
• Tell everyone who wants to use the sweeper what the risks involved are, and how accidents can be avoided.
• Keep hands and feet away from the rotating parts of the machinery.
• The fewer people there are near the machine, the less risk there is of anyone being hurt by stones or other hard objects thrown out by the brushes.
• Keep children clear of the working area of the machine at all times. Have another adult person keep an eye on the children.
• Be careful when reversing. Look back before and during reversing to check for obstacles. Beware of small children.
• Do not drive too near ditches or high kerbs. The machine may overturn if a wheel goes over the edge or a shoulder gives away.
• When clearing snow, never point the sweeper in the direction of people, animals, windows etc. Stones may be hidden in the snow, and may be thrown out with considerable force.
• Always switch off the engine before cleaning the sweeper, or carrying out repairs, adjustments or inspections.
• Tighten all nuts and screws to ensure that the machine is in a safe working condition.
• Always use original spare parts. Using nonoriginal parts may involve a risk of damage, even if they fit the machine.

INSTALLATION

DIMENSION

For UK customers only:

• UK Importer: Husqvarna UK Limited
• Address: Preston Road, Aycliffe Business Park Newton Aycliffe, County Durham UK DL5 6UP

Spare parts

CERTIFICATE
Manufacturer: KONEPAJA A. VANNE, KOVA, Veistämöntie 16, FIN- 24800 HALIKKO, FINLAND, hereby certifies that the machine of type T-20448 conforms to Machine Directive 2006/42/C concerning essential health and safety requirements in relation to design and manufacture.
Issued at Halikko 2019.

Declaration of Conformity

In accordance with UK Government Guidance

Product Model / Type:

Serial numbers dating from 2023 and onwards.
This declaration is issued under the sole responsibility of the product manufacturer.
The object of the declaration described above is in conformity with the relevant UK Statutory Instruments and their amendments:
The supply of Machinery (Safety) Regulations 2008 Issued at Halikko, 31.12.2022

Manufacturer:
Konepaja A. Vanne Veistämöntie 16 FIN-24800 Halikko FINLAND

UK importer:
Husqvarna Uk Ltd Preston Road, Co. Durham DL5 6UP

Authorized representative for KOVA and responsible for technical documentation

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>