GIGABYTE G152 Server Into a Tank Installation Guide
- June 12, 2024
- Gigabyte
Table of Contents
GIGABYTE G152 Server Into a Tank
Product Information
The G152 server is a high-performance server designed for immersion cooling tanks. It is important to follow the installation instructions and safety precautions provided in this manual to ensure proper and safe usage of the server.
Key Features:
- Designed for immersion cooling tanks
- The power supply fan is disabled by default
- Optional handles available for Asperitas tank
- Thermal pad with Indium foil
Product Usage Instructions
Installing the Server into a Tank
CAUTION
- Ensure the crane can handle at least 60 KG before installing the server into the tank.
- Only licensed professionals are authorized to access the restricted access location.
- Immerse the server in the fluid before powering it on. The power supply fan is disabled by default.
- Consult with the immersion cooling tank vendor to ensure compatibility and thoroughly read their tank manual.
- Avoid installing a GPU into the system without consulting GIGABYTE first to prevent compatibility issues.
DANGER
- Strongly recommended to use gloves when handling the coolant.
- Before handling coolant, handlers must read the material safety data sheet (MSDS) for their safety.
- The thermal pad contains Indium foil, so it is strongly recommended to use gloves when replacing the thermal pad.
Installation
- Attach the two carabiners to server handles.
- Put the server into the tank vertically.
Installing Optional Handles
Note: The optional handles are only for the Asperitas tank.
- Attach the handles to the server.
- Secure the handles with screws.
- Install the server into the tank.
Installing Thermal Pad to CPU
DANGER
- Use gloves and a mask when handling the thermal pad.
- Place the thermal pad on top of the CPU so it is strongly recommended to use gloves when replacing the thermal pad.
Installation
- Place the thermal pad on the top of CPU.
- Install the CPU heatsink. When installing the heatsink to CPU, use a Torx T20 screwdriver to tighten 4 captive nuts in sequence as 1-4.
- The screw tightening torque: 10 ± 0.5 kgf-cm.
- The screw tightening torque: 10 ± 0.5 kgf-cm.
NOTE : For more information about the GIGABYTE server, please visit www.gigabyte.com/Enterprise.
- All specifications are subject to change without notice. Please visit our website for the latest information.
- All other brands, logos and names are property of their respective owners. © 2023 Giga Computing Technology Co., Ltd. All rights reserved
Engineered by
Read User Manual Online (PDF format)
Loading......