LG 27ART10AKPL StanbyME Rollable Smart Touch Screen Instruction Manual

LG 27ART10AKPL StanbyME Rollable Smart Touch Screen

Product Information

Product Usage Instructions

1. Installation:
2. Insert the stand base into the styrofoam groove.
3. Insert the bar into the hole of the stand base along the groove until it reaches the parting line.
4. Secure the four screws.
5. Check the orientation of the power cable and cable holder.

  * Power plug
  * Cable holder
  * Power cable
5. Hold the screen and secure the power plug.
  * Check the position of the power plug on the back cover of the screen.
  * Secure it tightly to the back cover side.
6. Secure the screen to the stand.
  * Insert the stand hook into the back cover groove and tighten while pushing the lower part.
  * Secure one screw to the cable holder.
7. Secure the ring cover of the stand.
  * Align the screen back cover and ring cover [mark] and install them.
  * Check if it sits tightly.

2. Disassembly:
3. Position the screen vertically.
4. Push the top of the screen lightly in the direction of the arrow to disassemble a part of the cover space.
5. Use a wedge or pull it with your hand to completely disassemble the cover.

  * Caution: Avoid pushing it hard. There is a risk of damage.
4. Position the screen horizontally and disassemble the cable holder screw.
5. Lower the rear lever and push the bottom of the screen forward.
6. Lift the screen, separate the top of the screen, and hold the screen.
7. Keep the disassembled screen close to the stand at a distance of 10 cm or less.
8. Press the plug lock, push it in the direction of the arrow, and then disassemble the screen completely.
9. Lay the stand on the box packaging, remove the four screws, and then disassemble the stand bar.
  * Caution: Do not lift the plug or pull it down when disassembling the screen.

TOOLS REQUIRED

INSTALLATION

• A Insert the stand base into the styrofoam groove as shown in the figure.
• B Insert the bar into the hole of the stand base along the groove until it reaches the parting line.
• C Secure the four screws.

Hold the screen and secure the power plug.

• A Check the position of the power plug on the back cover of the screen.
• B Secure it tightly to the back cover side.

Secure the screen to the stand.

• A Insert the stand hook into the back cover groove and tighten while pushing the lower part, as shown in the figure.  (Push it until you hear a [click] sound.)
• B Secure one screw to the cable holder.

Secure the ring cover of the stand.

• A Align the screen back cover and ring cover [●mark] and install them.
• B Check if it sits tightly as shown in the figure.

Disassembly

1. Position the screen vertically.
2. Push the top of the screen lightly in the direction of the arrow to disassemble a part of the cover space.
3. Use a wedge or pull it with your hand to completely disassemble the cover.
4. Position the screen horizontally and disassemble the cable holder screw.
5. Lower the rear lever and push the bottom of the screen forward, as shown in the figure.
6. Lower the rear lever and push the bottom of the screen forward, as shown in the figure.
7. Press the plug lock, push it in the direction of the arrow, and then disassemble the screen completely.
8. Lay the stand on the box packaging, remove the four screws, and then disassemble the stand bar.

HOW TO USE

Read Safety and Reference.
Due to environmental government regulations about imports and battery destruction in Colombia, TVs will not include the batteries for the remote control.

User Install Guidewww.lg.com.

References

• LG Electronics & Home Appliances | Shop Now | LG USA

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>