BAJBC11 Smart Back Cushion User Manual

BAJBC11 Smart Back Cushion

Included in the box

• Smart Back Cushion Model: BAJBC11
  

• Remote Control Model: BC11-C

• USB-C Cable

• User Manual

Product at a glance

Smart Back Cushion

Remote Control

Sitting Number Shown on Screen|

Inflation Level of Smart Back Cushion

---|---
|
|
|
|
|
|
|
|
|
|
|

First Use

Charge Smart Back Cushion Before First Use

1. Plug USB-C Cable into USB-C Charging Port. Connect Smart Back Cushion to a power outlet using USB-C Cable (included) and a power outlet (not included). Smart Back Cushion would automatically deflate for several seconds.
   

2. While charging, Status Light of Smart Back Cushion keeps flashing green.

3. Once fully charged, Status Light of Smart Back Cushion turns solid green.
   

Preparation

1. Have Smart Back Cushion and Remote Control ready.

2. Pull out the insulation sheet at the back of Remote Control. Screen of Remote Control would light up and show “00”. Remote Control is on.
   

3. Long press Power Button of Smart Back Cushion for 2 seconds. Status Light of Smart Back Cushion turns solid green. Smart Back Cushion is on.
   

4. Put Smart Back Cushion on a chair, and sit on the chair. Light blue side of cushion should face toward you; the tag should be at your left side; the power button should be at your right side.
   

Inflating

1. Hold Remote Control in your right hand. Turn on Remote Control by firmly pressing “+” button of Remote Control.
   

2. Press “+” button of Remote Control firmly. Status Light of Remote Control flashes green once.
   Sitting Number shown on Screen will change from “00” to “01”.
   

3. As a response, Smart Back Cushion starts inflating for several seconds until it gets to the next inflation level. Status Light of Smart Back Cushion keeps flashing during the process.
   

4. Press “+” button of Remote Control several times, Sitting Number can go up to “10”, which is the highest inflation level.

5. The inflation level ranges from “00” to “10”: “00” indicates the lowest inflation level; “10” indicates the highest inflation level. The higher inflation level is, the firmer support you will get from Smart Back Cushion. Refer to Page 5 and Page 6 for details.

6. The inflation process could take up to 2 minutes. During the process, sit on the chair, feel the lumbar support from Smart Back Cushion.

Deflating

1. You can also press “-” button of Remote Control firmly to deflate Smart Back Cushion, if you
   want to try softer lumbar support. Status Light of Remote Control flashes green once. Sitting Number shown on Screen will change from “10” to “09”.
   

2. As a response, Smart Back Cushion starts deflating for several seconds. Status Light of Smart Back Cushion keeps flashing during the process.
   

3. You can use “+” and “-” to control the inflation / deflation until you find your perfect sitting number. Let’s assume it’s “06”, and the rest of the user manual will use “06” for demo purpose.

Set Up Smart Mode

1. f you are happy with the Sitting Number you are currently enjoying, you can use Smart Mode of Smart Back Cushion. Your Sitting Number is remembered, and can be recalled later. Smart Back Cushion would inflate to the corresponding inflation level when you recall your Sitting Number.

2. Long press Smart Button of Remote Control for 3 seconds. The “smart” icon on the screen
   flashes three times, and then turns solid. Smart Mode is on. Your favorite Sitting Number is remembered by Smart Back Cushion.
   

Remote Control

You do not need to turn off the Remote Control. Just leave it as it is.

1. With no further operation of Remote Control, Screen will fade out in 15 seconds.
   

2. After 3 minutes, Remote Control will turn off automatically.

3. To turn on Remote Control, press “+” button firmly.
   

Turn off Automatically

1. Smart Back Cushion will automatically turn off after 9 hours
   

2. Smart Back Cushion will deflate to level “00”. Status Light of Smart Back Cushion keeps lashing green during the process.
   

Turn Off Manually

Or, if you want to turn off Smart Back Cushion manually, just long press Power Button of Smart Back Cushion for 2 seconds.

Daily Use

Get Ready

1. The next day, you should see Smart Back Cushion in “00” level (totally deflated). That means it turned off automatically after 9 hours of working.

2. Turn on Smart Back Cushion. To do that, long press Power Button of Smart Back Cushion for 2 seconds. Status Light of Smart Back Cushion turns solid green. Smart Back Cushion is on.
   

3. Turn on Remote Control by pressing “+” button of Remote Control firmly.
   

Recall your Sitting Number

1. Then press “smart” button firmly to recall your Sitting Number. Your Sitting Number will show on Screen accordingly.
   

2. Smart Back Cushion would inflate to the corresponding inflation level. The process takes up to 2 minutes.
   

3. When finished, the “smart” icon turns solid. Do not press any button of Remote Control during the inflation process.

Charging Weekly

1. We suggest that Smart Back Cushion should be charged weekly.

2. When the battery is low, Status Light of Smart Back Cushion turns solid red
   

3. Plug USB-C Cable into USB-C Charging Port. Connect Smart Back Cushion to a power outlet
   using USB-C Cable (included) and a power outlet (not included). Smart Back Cushion would automatically deflate for several seconds.
   

4. While charging, Status Light of Smart Back Cushion keeps flashing green.

5. It takes about 3 hours to fully charge Smart Back Cushion. Once fully charged, Status Light of Smart Back Cushion turns solid green
   

Reset Smart Mode

If you need to have a new Sitting Number of Smart Back Cushion, you can reset Smart Mode.

1. To adjust Sitting Number of Smart Back Cushion, firmly press the “+” or “-” button of Remote Control.
   

2. Long press Smart Button of Remote Control for 3 seconds. The “smart” icon on the screen flashes three times, and then turns solid. Now you have reset Smart Mode.
   

Change Battery of Remote Control

It takes about 1 year for the battery of Remote Control to run out. A new 2032 battery is needed to replace the battery.

1. If the battery of Remote Control is low, Status Light of Remote Control flashes red, and the “00” on Screen flashes. Then Remote Control would turn off automatically.
   

2. Open the battery cover by pushing it downward. Replace the battery. Then put the battery cover back on.

3. Press “+” button firmly to turn on Remote Control

Summary

FCC Statement

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.

RF warning for Portable device :

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>