BERNINI Alberto Metal Tree Branch Bird Feeder Instructions

BERNINI Alberto Metal Tree Branch Bird Feeder

Product Information

The Alberto Metal Tree Branch Bird Feeder is a bird feeder designed to attract birds to your outdoor space. It consists of several parts, including:

• Branch 1
• Branch 2
• Branch 3
• 1 Middle Pole
• 1 Bottom Pole
• Base

This bird feeder is made in China and designed in the USA.

Product Usage Instructions

1. Remove all the Alberto Metal Tree Branch Bird Feeder parts from the packaging and check to ensure that all parts are present. You can refer to the parts list provided.

2. Assemble the Middle and Bottom Poles by threading the Middle Pole to the Bottom Pole and tightening them together.

3. Insert the male end of the assembled pole into the Base. Thread the nut onto the pole and tighten it securely.

4. Now, it’s time to assemble the branches. Take note of the following information:

   • Branch 1 is the middle mounting point on top of the pole and
     has a bird attached to it.

   • Branch 2 is the top mounting point.

   • Branch 3 is the lowest mounting point.

Make sure not to mix up the branches during unpacking. Thread each branch (1-3) onto the pole according to their designated locations.

5. Once the branches are assembled, you can fill all the bowls with your choice of bird food.
6. Your Alberto Metal Tree Branch Bird Feeder is now ready to attract birds to your outdoor area. Enjoy watching them feed!

For the latest version of these instructions, you can scan the provided QR code.

PARTS

ASSEMBLY

• Step 1: Remove the Alberto Metal Tree Branch Bird Feeder parts from the packaging and layout inventory to ensure all parts are present.

See the parts list to the left

• Step 2: Assemble the Middle and Bottom Poles: Thread the Middle Pole to the Bottom Pole and tighten (Figure 1).
• Step 3: Insert the male end of the assembled pole into the Base, thread the nut onto the pole, and tighten (Figure 2 B Arrow).
• Step 4: Assembling the branches:

NOTE: While looking at the top of the pole at the branch mounting points, Branch 1 is the middle mounting point, Branch 2 is the top mounting point and Branch 3 is the lowest mounting point (Figure 2 A ). Also, when unpacking please note the Branch packaging is labeled 1, 2 & 3. When unpacking do not mix up branches. Branch 1 is the Branch with the bird attached but Branch 2 and Branch 3 are similar but do not have birds attached. If Branch 2 & 3 are installed in the wrong location the bowls will not be level. Thread the branches (1-3) onto the pole (Figures 3, 4 & 5). Please note the location of branches in (Figure 2 A ).

• Step 4: Fill all Bowls with your choice of bird food (Figure 7).

Warranty

LIMITED ONE-YEAR WARRANTY

This warranty gives you specific legal rights and you may also have other rights which vary from state to state. This product has a one-year limited warranty on all materials and workmanship. Bernini® warrants to the original purchaser of this product that the product will be free from manufacturing defects in workmanship and material for a period of one (1) year from the date of the original purchase. If within one (1) year this product fails due to a defect in material or workmanship, Bernini® will repair, replace or supply any defective part at their discretion. The purchaser must contact Bernini® and provide a description of the defective part, including digital pictures if requested, with this original purchase documentation as validation of warranty coverage. This warranty does not cover or apply to (a) damage to the product due to misuse, mishandling, and abuse, (b) products not used in accordance with instructions, (c) product not assembled or installed according to instructions, and (d) normal wear and tear. Call us for assistance at +1 619-449-2392 or you can email or mail us at 9545 Pathway Street, Santee, CA 92071, customercare@berninifountains.com, Our Customer Care Department is available: Monday – Friday 8:30 am to 4:00 pm PST / 11:30 am – 7:00 pm EST.

Please read first before returning
Please call us for assistance at 1-619-449-2392 or email us at customercare@berninifountains.com. Our Customer Care Department is available: Monday – Friday 8:30 am to 4:00pm PST, and 11:30 am to 7:00 pm EST. If you have any questions regarding assembly, parts, or operation, please visit our website at www.berninifountains.com. You will find instructional videos on how to assemble and operate your fountain and keeps you up to date on our newest products. You can also email us with any questions you have. This product comes with a one-year limited warranty against materials and workmanship.

January 2023 © Yeiser Research & Development LLC and Bernini Fountains® Trade names, product names, and logos used in this document are the trademarks or registered trademarks of Yeiser Research & Development LLC, Santee, CA 92071

Santee, California 92071 | World Wide Patents Pending | Email: customercare@berninifountains.com | On the web: www.berninifountains.com. Facebook & Pinterest: Bernini Fountain Company | Instagram: @berninifountains Twitter: @yrdllc © Yeiser Research & Development, LLC; 2023. All rights reserved. Made in China | Designed in the USA.

References

• Bernini Fountains. All Rights Reserved.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>