Bernini Fountains Pro Series Metal Garden Hose Owner’s Manual
- June 10, 2024
- BERNINI FOUNTAINS
Table of Contents
PRO SERIES
Owner’s Manual
INSTRUCTIONS:
- Remove the Metal Garden Hose® from the package and completely unravel your Metal Garden Hose®.
- Attach the spray nozzle (included) to the outlet of the Metal Garden Hose® (figure 1). Make sure 1 silicone washer is in place.
- Attach the Metal Garden Hose® inlet to the water supply of your home (figure 1). Make sure 1 silicone washer is in place.
- Turn on the faucet from your home’s water supply to the Metal Garden Hose®.
NOZZLE CLEANING: (DO NOT DISASSEMBLE WHILE PRESSURIZED)
For long life, the Metal Garden Hose® Pro Series Aluminum Nozzle is designed
to be disassembled and cleaned should your nozzle become clogged.
- Hold the inlet of the nozzle and turn spray adjuster counter clockwise to unscrew from base.
- Rinse or wipe any debris from nozzle internals (careful of o-rings).
- Dry with clean towel or cloth.
- Reassemble nozzle, by screwing spray adjuster clockwise until spray adjuster comes to a stop. This is the off position, do not over tighten.
Assembly hose to faucet
Storing your hose
You can store your Metal Garden Hose® on just about any common hose reel or
simply coil your hose next to your faucet.
TIP: When you are finished watering with your Metal Garden Hose® It’s
best to release the water pressure from your hose before storing.
Scan this QR code for the latest version of these instructions
WARNING
-
The water in ANY garden hose may become contaminated and cause serious health effects.
-
Strangulation hazard. Hose wrapped around neck may cause serious injury or death.
-
Keep out of reach of children.
-
For general OUTDOOR use ONLY in applications under 80 psi.
-
DO NOT use this hose for commercial applications, in hot water applications, or high pressure applications. Doing so may cause serious personal injury and or damage/ destruction to the product.
However you can use it on the low pressure inlet side of a high high pressure washer. -
DO NOT leave this product unattended when it is in use or under pressure.
-
This product is NOT A TOY.
LIMITED ONE YEAR WARRANTY
For warranty information please refer to our website at:
www.berninifountains.com/pages/warranty-
info.html. Call us
for assistance at +1 619-449-2392 or
you can email or mail us at: 9545 Pathway Street, Santee, CA 92071
customercare@berninifountains.com
Our Customer Care Department is available: Monday – Friday 8:30am to 4:00pm
PST / 11:30am – 7:00pm EST
Remember if you need help contact Customer Care: 1+ 619-449-2392
LIMITATION OF LIABILITY
Liability limited to the purchase price of this product.
YRDLLC shall not be liable for any incidental or consequential damages or any
implied warranty on this product.
Some states do not allow the exclusion or limitation of incidental or
consequential damages, so the above limitation or exclusion may not apply to
you.
Yeiser Research & Development
Santee, CA 92071 | www.berninifountains.com
Made in China, Designed in the USA
WORLDWIDE PATENTS PENDING
For Assistance Call: 1 619-449-2392
2022 © Yeiser Research & Development and Metal Garden Hose®.
Trade names, product names, patterns, prints, images and logos used in this
document are the trademark or registered trademarks of YRD LLC, Santee, CA
92071
WORLD WIDE PATENTS PENDING