KEYDIY KD-Tag Position Tracking Device User Manual
- June 12, 2024
- KEYDIY
Table of Contents
KEYDIY KD-Tag Position Tracking Device
Overview
KD-Tag is mainly used for global precise positioning of items such as backpacks, mobile phones, wallets, umbrellas, handbags, jackets, cameras, suitcases, keys, bicycles, etc. No need of mobile data or annual fees, only work with IOS system.
major function
Main working parameters
Buttons settings
- Turn on: Click the button once, there will be long buzz heard. (If no buzz heard it means already been turned on or battery out)
- Turn off: Hold the button for around 3 seconds until two short buzz sound were heard.
- Enable the bluetooth of the KD Tag: Click the button twice until one short buzz heard.
- Restore factory settings: 4+1 click, the first 4 times click it short and the fifth time need to hold around 3 seconds until hear the buzz.
Product binding
Check whether the Bluetooth of the iphone is turned on before binding, ensure that the Bluetooth of the iphone is turned on, and press the KD Tag button once to power on
- Open the Find My of iphone
- Enter the items to add items.
- Select other support items
- connect the KD tag founded
- Click agree to continue after confirm the APPLE ID
- Finish binding
Accurate search at close range
When KD Tag is near the iphone (Within 15 meters), click the KD Tag in the
item list, click Play Sound, the KD Tag buzzer will buzz.
Precise global positioning
When KD Tag is far away from the bound iphone, click the KD-Tag to check the
location map, then click Directions to track the route to the KD-Tag 
Left Behind Reminder
When ‘Notify When Let Behind’ function is on, if your KD-Tag is left behind,
your phone will get notification message that your goods is left behind.
Lost Mode
When the mode is enabled, you will receive notification when the location
becomes available. Since the KD-Tag was bound to your phone, it can’t be bound
to other phones; When someone find your KD Tag the can see your contact
information if they tried to bind the Tag. 
FAQ
- 1.Q: Failed to bind KD Tag or find it
- A:1.Check whether the bluetooth of phone is enabled.
- 2.Check whether KD Tag has been turned on
- 3.Check whether the KD Tag has been bound to other phone, if bound please remove it from the bound phone first and then bind to the needed phone.
- 2. Why is the positioning not accurate and the position not updated?
- A: 1.No Apple device passed by nearby the Tag, if there were some Apple devices passed by, real-time positioning will be achieved.
- 2.It takes 5-15 minutes to update location and may be delayed
- 3. Scope of using
- A: This product is limited to busy urban areas or areas with many Apple devices, and is not suitable for use in remote areas or areas with few Apple devices.
- 4. Suitable Apple devices
- A: Only can be used with iphone or ipad, we suggest to update iPhone or ipad to the latest version.
Declaration
The final interpretation rights of this manual belong to Shenzhen Yiche
Technology Co., Ltd. Without permission, no individual or organization may
reproduce or disseminate this manual in any form. This manual is subject to
change without prior notice.
Warning: Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’ authority to operate
the equipment.
NOTE: This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions:
- (1) This device may not cause harmful interference, and
- (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
shenzhen yiche technology company ltd
- www.ecartek.com
- 400-8262518