ELEVATE ADPT001W Audio Stream Adapter User Manual
- June 12, 2024
- Elevate
Table of Contents
Adaptor
User Manual
Read Instruction manual carefully before use
PRODUCT DIAGRAM
A. Switch | F. HDMI out |
---|---|
B. DC | G. Audio out |
C. Audio In | H. WiFi on/off |
D. HDMI In | I. Power supply |
E. Indicator lights | J. USB-A to USB-C |
OPERATION
Connecting the adapter to the atomizer
-
Hold and press the power on button for 2 seconds, until the red light starts to blink.
-
Open the Game Scent app and click on “START SCANNING.”
-
Select the device name with the prefix “Adapter_” from the app. (If the connection is successful, the right light will stop blinking and stay on)
-
Select the WiFi network and enter the Wi-Fi password.
-
When the green light goes on, the adapter is connected to the WIFI network. (At present, the adapter has completed the distribution network process. Complete the distribution network of the atomizer as soon as possible.)
-
Plug the atomizer into a power outlet.
Hold and press the power on button for 2 seconds, until the LED light starts to blink. -
Click “START SCANNING” in the app.
-
Select the device name with the prefix “Atomizer_” from the app.
-
Select the WIFI network and enter the WIFI password.
Deconncting the adapter to the atomizer
First, make sure that the adapter and the atomizer are powered on and online.
- In the app, click Configure Device to check the devices information.
- Click “UNBIND DEVICE”
- Select the device name with the prefix “Adapter_” from the app. (If the connection is successful, the right light will stop blinking and stay on)
Clearing the WiFi information
- Plug a 5V power supply into the adapter.
- Hold and press the “power on” button for 2 seconds.
- Press the “power on” button 3 times in 5 seconds.
- For adapter: WIFI light (green) will not light up, (red) will blink.
For atomizer : LED will blink.
The operation steps of the adpater and atomizer are the same.
Indicator Lights
PRECAUTIONS
If you do not plan to use the diffuser for an extended period, it is advisable to remove the bottle containing the essential oil and store the remaining oil.
- Ensure the spray head is thoroughly cleaned. Keep the diffuser in a dry environment.
- If there are no essential oils in the device, the device will not shut down automatically, requiring it to be turned off manually.
- Please note of spray intensity and be aware that slight variations are normal.
- The fog effect may be influenced by different factors such as the type of essential oils used, humidity levels, temperature, and indoor airflow.
- Prior to switching to a different essential oil, please ensure that the product is properly cleaned.
DISCLAIMER
In order to avoid damaging the product, please follow the necessary guidelines listed below:
- Do not allow non-approved staff to transform, disassemble, or repair the product. If the product needs to be repaired, please contact our sales department.
- Do not puncture, stab, twist, or stretch the line of the power adaptor. Do not place the electrical wire near or in a high-temperature location. Do not put heavy items or put pressure on the wire. Clipping or repair of the wire are also not be allowed.
- If the adaptor wire is damaged or the socket is loose, please stop using.
- If there is an abnormal odor, noise, abnormal generation, then the product or the adaptor may be at fault. Please pull the adaptor out of the supply socket, and stop using at the same time.
- Do not place the adaptor into water or any liquid material.
- Do not set the adaptor in or near a wet location, such as a bathroom, kitchen, sauna, etc.
- To maintain proper function, remove the essential oil bottles and use a cloth to wipe them clean, after every use.
- Scent oils may cause staining. If there is an accidental spill-out, use a dish cloth to wipe it immediately.
- Do not let the spray nozzle spray directly onto furniture, clothes, or walls.
- Avoid indirect sunlight. Do not place near an air conditioner, fan, or high temperature location.
- Place on a flat surface. Do not place on a soft surface, like a rug or pillow.
- Do not place on any appliances such as a microwave, television, or audio equipment.
- Do not cover the mist outlet. Impeding, blocking or covering the mist outlet will result in oil restriction and damage.
- After extended use, product should be turned off for a few hours.
- Do not touch the product while your hands are wet. May cause electric shock.
- Place out of reach from children.
PLEASE NOTE: It is recommended to read the user manual in order to safely operate this product.
FCC Caution:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance 20cm between the radiator and your body: Use only the supplied antenna.
IC Caution:
RSS-Gen Issue 5 “&” RSS-Gen numeri 5
This device contains license-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s license-exempt
RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may
cause undesired operation of the device.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
RF exposure statement:
The equipment complies with IC Radiation exposure limit set forth for
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body.
Product Specification
Product size: | 73x69x15mm |
---|---|
Input voltage: | 5V |
Product weight: | 50g |
Raw materials: | ABS |
Accessories: | Type C cable, HDMI cable, earphone cable, user manual |
This product cannot be discarded as domestic waste and should be recycled according to the garbage classification. Proper disposal and recycling help protect natural resources, human health and the environment.
Made in China
MODEL NO. ADPT001 and ADPT001W
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>