ULTRAHD TRC20215B Stainless Steel Trash Can Instruction Manual
- June 12, 2024
- UltraHD
Table of Contents
ULTRAHD TRC20215B Stainless Steel Trash Can
ASSEMBLY INSTRUCTIONS
Stainless Steel Trash Can
Model No.: TRC20215B / TRCK15933 17.2 in. W x 13 in. D x 34.6 in. H
FINGERPRINT RESISTANT SURFACES AND INCREASED DURABILITY
Reference page 4 for special care and maintenance of stainless steel
OVERVIEW
PARTS LIST
Please check the parts carefully according to the parts list. If you are missing any parts, please call our customer service department (please refer to page 4 of 4).
ASSEMBLY INSTRUCTIONS
Model No.: TRC20215B / TRCK15933
Step 1: Install (#12-C & #13-C) Swivel Wheels or (#13-E) Leveling Feet.
Open the box and turn the (#1) Body upside down.
If using (#12-C & #13-C) Swivel Wheels:
Install (#12-C) Swivel Wheel with Brake and (#13-C) Swivel Wheel without Brake
onto the bottom panel of the (#1) Body. Use (#25-B) Wrench to screw in the
(#12-C & #13-C) Swivel Wheels completely.
If using (#13-E) Leveling Feet:
Install (#13-E) Leveling Feet onto the bottom panel of the(#l)Body.
Step 2: Install (#3) Handle.
Turn (#1) Body upright after you install the wheels or leveling feet.
Attach the (#3) Handles to the side of the (#1) Body. Line up the screw holes
and use (#43) Screw H (M4x15L) to tighten.
Step 3: Placing (#2) Top.
Put a plastic bag (not included) inside the (#1) Body, then place the (#2)
Top onto the (#1) Body.
Note:
- No plastic bag included for the Trash Bin.
- Use either wheels or leveling feet. DO NOT install both.
Volume Capacity: 65 L / 17 gal
- If you are missing any parts, have any questions, or need additional assistance in assembly, please contact our bilingual (English and Spanish) customer service department at:
Seville Classics, Inc.
- Telephone: {800) 323-5565
- Fax: {310) 533-3899
- Hours: 8:30 AM – 4:30 PM {PST), Monday to Friday
- Email: [email protected]
- Homepage: www.SevilleClassics.com
- Please visit our website or call and inquire about additional items*
Stainless Steel Maintenance:
These parts have an UltraGuard® fingerprint resistant finish. Do not use
traditional stainless steel cleaners on this unit. Lightly wipe off once a
month with clean warm water and a soft cloth (preferably a microfiber cloth).
This is the safest formula to prevent new stains from appearing over time and
manage unwanted fingerprints or grease marks. Remember to always wipe in the
direction of the surface grain (NEVER ACROSS) and always use a lint-free
cloth. Once the surface is clean, thoroughly wipe it dry with a soft absorbent
cloth.
Additional Companion Products are available for purchase at www.sevilleclassics.com
- Model No. UHD20206 UltraHD Workbench
- Model No. UHD20204 UltraHD Rolling 6-Drawer Cabinet
- Model No. UHD20242 UltraHD Rolling Workbench
- Model No. UHD16236 UltraHD Rolling Cabinet
- Model No. UHD16238 UltraHD Storage Cabinet
- Model No. UHD20209 UltraHD Wall Cabinet