DELTACO SH-IPC07 Smart Home WiFi Camera User Manual

SH-IPC07 Smart Home WiFi Camera

Product Information

The SH-IPC07 Smart WiFi Camera is a product by Deltaco. It has a MicroSD slot, reset button, speaker, microphone, and LED indicator.
The camera comes with an attached DC cable with a DC connector that needs to be used to connect to the power adapter. The LED status indicates the status of the camera – red means that the camera is just turning on or there is something malfunctioning, flashing red means waiting for connection, blue means working correctly, and flashing blue means connecting. The camera can be mounted on a wall using screws.

Product Usage Instructions

To use the SH-IPC07 Smart WiFi Camera, follow these instructions:

1. Connect the camera to the power adapter using the attached DC cable.
2. Drill holes in the wall where you want to mount the camera.
3. Mount the camera on the wall using screws.
4. Adjust the camera angle by aiming and rotating it. Fasten the screw to secure it in place.
5. If you need to reset the camera, press and hold the reset button for about 5 seconds. Any changed settings will change to factory default.
6. Clean the outside of the device using a soft cloth. Do not use cleaning solvents or abrasives and do not clean the inside of the device.
7. For more information on using ONVIF with the camera, please check the product’s page on Deltaco’s website.
8. If you encounter any issues with the product, please contact Deltaco’s support team by email at help@deltaco.eu

Thank you for choosing Deltaco!

1. MicroSD slot
2. Reset button
3. Speaker
4. Microphone
5. LED

The camera has an attached DC cable with a DC connector. Use the cable to connect to the power adapter.

Mounting

1. Drill holes in the wall for the camera.
2. Mount the camera by using the screws.
3. Adjust the camera angle by aiming and rotating it. Fasten the screw.

Reset

Press and hold about 5 seconds for reset. Any changed settings will change to factory default.

LED status

• Red = the camera is just turning on or there is something malfunctioning.
• Flashing red = waiting for connection.
• Blue = Working correctly.
  Flashing blue = Connecting.

ONVIF

For use of ONVIF, please check the prod-uct’s page on Deltaco’s website.

1. Download and install the app “Deltaco smart home” from Apple App Store or Google Play Store on your mobile device.

2. Launch the app “Deltaco smart home“.

3. Create a new account or log in to your existing account.

4. Tap “+” to add the device.

5. Choose category and then the type of product from the list.

6. Connect the device to power.

7. If the LED/lamp does not flash: Reset the device.Install and use
   If the status indicator flashes: Confirm in the app.

8. Confirm the Wi-Fi network and password.

9. Enter the device name.

Cleaning and maintenance

Do not use cleaning solvents or abrasives. Do not clean the inside of the device. Do not attempt to repair the device. If the device does not operate correctly, replace it with a new device.
Clean the outside of the device using a soft cloth.

Support

More product information can be found at www.deltaco.eu
Contact us by e-mail: help@deltaco.eu

References

• deltaco.eu
• Aurdel - Distributør av den nyeste og beste teknologien
• Aurdel - Distributør av den nyeste og beste teknologien
• deltaco.se/
• Alla produkter
• STREETZ Trådlösa in-ear hörlurar med laddningetui, BT 5, TWS, vit
• deltaco.se/produkter/xx

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>