HORNBLASTERS Conductor’s Special 232 Spare Tire Delete Kit Instruction Manual
- June 12, 2024
- HORNBLASTERS
Table of Contents
HORNBLASTERS Conductor’s Special 232 Spare Tire Delete Kit
Product Information
The product is an It is designed to be used for various purposes and is equipped with a powerful horn that produces loud sound. The product is easy to install and comes with a user manual for proper guidance.
Product Usage Instructions
- Make sure to read the user manual carefully before starting the installation process.
- Find a suitable location to mount the product, ensuring it is securely attached.
- Connect the necessary wires as instructed in the manual.
- Once the product is properly installed, test it by pressing the horn button.
- If the horn does not produce sound, check the wiring connections and ensure they are properly connected.
- Adjust the volume or sound settings according to your preference, if applicable.
- For any troubleshooting or further assistance, refer to the support contact details below:
Website: www.hornblasters.com.
Email: support@hornblasters.com.
Preparing the Air Compressor
The 3Q air
compressor features a pair of 3 feet with a spring-loaded rubber mount to
reduce the vibration from the compressor while it fills the tank. The feet
must be assembled as shown above for the right fit. Do not over tighten these!
Finger tight + 1/2 turn is plenty.
Each foot will use the hardware as shown above. Use a Phillips head screwdriver and a 10mm wrench/ socket to tighten each foot. Remember, hand tight + 1/2 turn. If you over-tighten the assembly these feet will transfer all of the compressor vibration directly to your vehicle. The dotted blue line in the assembly iS above is where the rubber part of the foot will be when you assemble the hardware together. The plastic cup that faces towards the bolt will go on the bottom of the rubber along with the nut/washers.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>