Wichard 35500 Snatch Block with Snap Shackle Owner’s Manual
- June 12, 2024
- Wichard
Table of Contents
Wichard 35500 Snatch Block with Snap Shackle
Product Information
Product Name: Snatch Block with Snap Shackle
Part Number: 35500
Description:
This snatch block with snap shackle is designed for various applications and
is equipped with features that enhance its performance. It allows for free
rotation, has a strong closing system, and can be easily opened by pulling on
the plunger pin. The elastomer moulded cheeks provide shock and scratch
resistance.
Technical Information
Materials:
- HR 17.4 PH forged stainless steel arm
- Elastomer moulded cheeks
- Composite sheave
Rope Size: Maximum rope size of 18 mm (approximately 23/32 inch)
Dimensions:
- Length: 6 7/64 inches
- Width: 2 21/64 inches
- Thickness: 1 59/64 inches
Working Load: 2640 lb
Breaking Load: 5510 lb
Weight: 0.913 lb
Please note:
- Working Load (WL): Intended for nautical applications
- Working Load Limit (WLL): Applicable for industrial applications only. The safety factor is 5 times the breaking load. WLL = Breaking load / 5
Product Usage Instructions
- Ensure that the snatch block is suitable for your intended application and rope size. The maximum rope size that can be used with this snatch block is 18 mm (approximately 23/32 inch).
- To use the snatch block, first, identify the desired attachment point on your equipment or rigging.
- Open the snatch block by simply pulling on the plunger pin. This will release the snap shackle and allow the block to open.
- Attach the snatch block to the desired attachment point using a secure and appropriate method, such as a shackle or a suitable knot.
- Once attached, close the snatch block by pushing the plunger pin back into its original position. Ensure that it is securely locked in place.
- Pass the rope through the snatch block’s sheave, making sure it is properly aligned and not twisted.
- Apply tension to the rope, either manually or using a winch or other suitable device, to achieve the desired effect or load distribution.
- Monitor the snatch block during use to ensure proper functioning and safety. If any signs of damage or wear are observed, discontinue use and replace the snatch block.
- After use, properly clean and store the snatch block in a dry and secure location to prevent damage and maintain its performance.
- Follow all recommended safety guidelines and regulations when using the snatch block, and consult with professionals or experts if unsure about its application or suitability for specific tasks.
Wichard, 1 ZI de Felet, CS 50085, 63307 Thiers, France
Tél: +33 (0)4 73 51 65 00
E-mail: marine@wichard.com
Snatch block with snap shackle – Max rope size 18 mm
Part #35500
Description
- Free rotation thanks to snap shackle
- Very strong closing system
- Easy opening by simply pulling on the plunger pin.
- Shock and scratch-resistant thanks to the elastomer moulded cheeks
Applications
- Changing sheets
- Spinnaker sheet deflector blocks
Technical information
Caption
- Working load (WL) : for nautical applications
- Working Load Limit (WLL): for industrial applications only. The safety factor is 5 times the breaking load. WLL = Breaking load / 5
Wichard strives to ensure, to the best of its ability, the accuracy and the
update of the information disseminated on this document, and reserves the
right to correct at any time and without notice the content, as well as to
evolve its products.
In the case of an industrial application, please contact our sales and
technical department to validate the use of these products. The request for
certificates can be made directly with the sales department when ordering the
products. Non-contractual pictures.
© Wichard 2020-2022
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>