baby jogger B07NXW16XJ City Mini 2 Stroller Instruction Manual

city mini® 2
Stroller

©2021 Baby Jogger NWL0000896346F 10/21
ASSEMBLY INSTRUCTIONS
babyjogger.com

1 Handlebar
2 Tether
3 Canopy
4 Auto-Lock
5 Harness Pads
6 Harness Buckle
7 Fold Strap
8 Rear Wheel
9 Rear Wheel Release Button
10 Parking Brake| 11 Storage Basket
12 Front Wheels
13 Swivel/Lock Button
14 Swivel/Lock
15 Front Wheel Release Button
16 Footwell
17 Leg Support
18 Crotch Strap Pad
19 Seat Recline Strap
---|---
|
---|---
|
|

**** WARNING

IMPORTANT – Keep these instructions for future reference.
Read these instructions carefully before use. Your child’s safety may be affected if you do not follow these instructions.

SINGLE STROLLER

• This stroller seats one passenger. NEVER allow more than one child at a time on this stroller.
• This seat unit is suitable for children from birth to 22.5 kg (50 lb). Maximum weight is 22.5 kg (50 lb); maximum height is 101.6 cm (40 in).
• The total weight load recommended for this stroller is 28 kg (62 lb). 22.5 kg (50 lb) in the seat, 1 kg (2 lb) in the seat back pocket, and 4.5 kg (10 lb) in the basket. Excessive weight may cause a hazardous unstable condition to exist.
• WARNING: TO AVOID INJURY OR DEATH:
• ALWAYS APPLY THE BRAKES WHENEVER THE STROLLER IS STATIONARY.
• DO NOT LEAVE CHILDREN UNATTENDED.
• SECURE THE CHILD IN THE HARNESS AT ALL TIMES.
• DO NOT CARRY EXTRA CHILDREN OR BAGS ON THIS STROLLER.
• MAKE SURE CHILDREN ARE CLEAR OF ANY MOVING PARTS IF YOU ADJUST THE STROLLER.
• WARNING: USE THE STRAP TO STOP THE STROLLER FROM ROLLING AWAY.
• WARNING: USE THE HARNESS AT ALL TIMES.
• This stroller is not suitable for running, jogging, skating or rollerblading.
• Always use the restraint system.
• Check that the pram body or seat unit attachment or car seat attachment devices are correctly engaged before use.
• WARNING: NEVER LEAVE THE HARNESS BUCKLED WHEN NOT FITTED TO A CHILD. THE HARNESS CAN FORM LOOPS THAT POSE A STRANGULATION HAZARD TO THE CHILD.
• Accessories that are not approved by the manufacturer or distributor shall not be used.
• Do not let your child play with this product.
• Parcels or accessory items, or both, placed on the unit may cause the unit to become unstable.
• Any load attached to the handle and/ or on the sides of the stroller affects the stability and folding mechanism of the stroller.
• Ensure that all the locking devices are engaged before use.
• Lock the brakes before loading and unloading your child and whenever the stroller is not moving.
• The stroller is not meant to be used for transporting children up or down stairs, travelators, or escalators. Damage resulting to the stroller will not be covered under warranty.
• Be aware of the risk of an open fire and other sources of strong heat, such as electric bar fires, gas fires, heaters, etc, in the near vicinity of the stroller.
• This stroller is designed for use on flat or gently sloping surfaces. Be aware that the possibility of tipping occurs if this product is used on higher sloping and uneven surfaces.
• Always keep fingers away from moving parts when folding, unfolding, or adjusting the stroller to prevent finger/body part entrapment or pinching.
• To prevent injury, remove the child tray or belly bar accessory when folding or unfolding the stroller.
• Before lifting and carrying the stroller, make sure the storage lock is properly secured.
• This stroller does not replace a cot or a bed. Should your child need to sleep, then it should be placed in a suitable pram body, cot, or bed.
• Accessories that are not approved by Baby Jogger shall not be used.
• The passenger shall remain seated (no standing in the stroller).
• It may be unsafe to use replacement parts other than those supplied or approved by Baby Jogger.

FRAME

1. Unpack the stroller frame from the box and set the wheels aside. Unlock the stroller by pulling the storage lock lever.

2. Unfold the stroller by pulling the handlebar away from the frame. Then lift the handlebar away from the seat. The stroller will lock into place and you will hear a click.

3. Place the stroller in the upright position
   WARNING: Ensure that all the locking devices are engaged before use.
   FRONT WHEEL

4. Installation
   • Lay the stroller on its back so the handlebar is resting on the floor.
   • Attach the front wheel by sliding it into the front wheel mount until it clicks. Gently pull on the front wheel to make sure it is properly attached.

5. Removal
   • While pressing the front wheel release button, gently slide the front wheel out of the front wheel mount.
   SWIVEL FEATURE

6. Press the Swivel Lock button down and slide the Swivel Lock to the left to lock the front wheel assembly in a fixed position for long-distance strolling.

7. Press the Swivel Lock button down and slide the Swivel Lock to the right to allow the front wheel assembly to swivel.
   WARNING: When loading and unloading a child, lock the front wheel in a fixed position. Although the front wheel of your stroller locks, it is not intended for jogging or exercise purposes.
   REAR WHEELS

8. Installation
   • Align the rear wheel axle with the wheel mount on the stroller frame and insert it into the wheel mount until it locks into place. You will hear a click.
   • Gently pull on the rear wheel to make sure it is properly attached.

9. Removal
   • While pressing down on the wheel release button, gently slide the rear wheel out of the wheel mount.
   BRAKE

10. To lock the brakes: push the brake lever down to engage the brakes.

11. To release the brakes: lift the brake lever up.
    WARNING: Lock the brakes before loading and unloading your child and whenever the stroller is not moving.
    CANOPY

12. Attach the canopy to the frame by sliding the canopy onto the mounting brackets. To remove, slide canopy off of mounts.
    NOTE: When using a Baby Jogger, Graco, or Britax car seat, the canopy can be attached. For all other car seats, the canopy must be removed.

13. Snap the two snaps to the stroller frame.

14. Zip the back of the seat to the canopy top.
    Attach the 2 fastening strips on the side of the canopy.

15. Pull forward to open the canopy and push backward to close the canopy.

16. To use the canopy window, roll the shade up towards the top and secure it with the elastic button.
    ADJUSTING SAFETY HARNESS

17. From the back of the seat, unfasten and open the pocket to locate the plastic square stopper. Turn the stopper and pass through the openings in the PE board and seat fabric.

18. Reinsert stopper at seat opening closest to child’s shoulders. Pass back through seat fabric and PE board. Tug on the strap to ensure the stopper is locked. Repeat on both sides.
    WARNING: Avoid serious injury from falling or sliding out. Always properly adjust and fasten the safety harness.
    **WARNING:** Always use the crotch strap in combination with the shoulder straps and waist belt.

19. Slide the harness pads up to access the plastic guide on the strap.

20. Hold the plastic guide and pull the strap to tighten or loosen.
    USING SAFETY HARNESS

21. Insert side strap buckle into harness buckle on both sides.

22. Insert connected to harness and side strap buckles into the sides of the crotch buckle.

23. Press the button on the crotch buckle to release.
    RECLINE THE SEAT

24. Pinch the clamp behind the seat and slide it down to the desired recline.

25. Pull the seat down on both sides to match the clamp position. Reverse steps to return to the upright position.
    **WARNING:** When making adjustments to the stroller seat, make sure the child’s head, arms, and legs are clear of moving seat parts and stroller frame.

26. For extra ventilation, roll up the seat back flap and secure it with elastic and a button.
    LEG SUPPORT

27. To use the leg support, lift the front of the seat pad.

28. Rotate the support arm out and lower the seat pad. Lock the support arm.

29. To lower leg support, reverse the steps.
    FOLDING
    • Remove your child from the seat.
    • Disengage front wheel swivel locks.
    • Remove all attachments and all items from the basket.
    WARNING: To prevent injury, remove Child Tray or Belly Bar accessory when folding or unfolding the stroller.

30. A.Insert finger into the loop and pull up, then B. Pull up on the “Pull to Fold” folding handle and let the frame collapse.

31. Make sure the auto-lock lever clicks into place.
    BASKET REMOVAL

32. From the front of the stroller, unsnap the 2 snaps and pull the straps out of the footwell.

33. Lift basket off the hook.

34. From the back, lift the top of the basket off the tab on both sides of the frame.

35. Remove the strap from the C clamp on both sides of the frame.
    REMOVING THE SEAT PAD

36. Flip the stroller over to expose the seat bottom.
    Unfasten the 2 fastening strips and pull them out of the stroller frame.
    B Unfasten the fastening strip and pull them out of the sides of the stroller frame.
    C Unscrew the right carabiner hook and pull the strap out from the seat pad.

37. Flip the seat back over on its wheels. Pull seat fabric up and off of buttons.

38. Starting from the bottom, slide the seat pad out from the stroller frame on both sides.

39. From the top, slide the seat pad out of the frame on both sides.

40. Remove seat pad.
    Reverse the steps to reattach the seat pad to the frame.

CARE AND MAINTENANCE

To preserve the longevity of your stroller, it is important to perform simple, regular maintenance. From time to time, make sure that the joints and folding areas are still in good condition. If you hear any squeaking or feel tension, you can take your stroller to a local bike shop for added lubrication. All repairs should only be carried out by an authorized dealer.

WASHING
Seat Fabric

• You can hand wash your stroller’s seat in cold water with a mild detergent.
• Be sure to remove the metal frame and PE boards from the seat before washing.
• Do not use solvents, caustic or abrasive cleaning materials.
• To minimize shrinkage, simply reattach the seat to the frame to dry.
• Do not press, iron, dry clean, tumble dry or wring the fabric.
• If the seat covers need to be replaced, only use parts from a Baby Jogger Authorized Dealer. They are the only ones that are guaranteed to have been safety tested and designed to fit this seat.
  • DO NOT machine wash your stroller’s canopy.

Plastic/Metal Parts

• Wipe clean using mild soap and warm water.
• You must not remove, dismantle or alter any part of the seat folding mechanism or brakes.

Wheel Care

• The wheels can be cleaned using a damp cloth. They will need to be dried completely with a soft towel or cloth.

STORING

• Sunshine can fade seat fabric and dry out tires, so storing your stroller indoors will prolong its good looks.
• DO NOT store outside.
• Ensure that the stroller is dry before storing it for prolonged periods.
• Always store the stroller in a dry environment.
• Store the stroller in a safe place when not in use (i.e. where children cannot play with it).
• DO NOT place heavy objects on top of the stroller.
• DO NOT store the stroller near a direct heat source such as a radiator or fire.

Baby Jogger’s Limited Lifetime Warranty:

Baby Jogger warrants that the frame is free of manufacturer defects for the lifetime of the product. Manufacturer’s defects include but are not limited to the breaking of welds and frame tube damage. Textile or soft side materials and all other components shall be warranted for one year from the date of purchase (except for tubes and tires). Proof of purchase is required to make a warranty claim and the warranty is only extended to the original purchaser. Your stroller comes with a limited lifetime warranty on the frame and a 12-month warranty on textiles and mechanical components. Visit www.babyjoggerstrollers.com.au to register your new stroller and we’ll extend your warranty by a further 12 months.

THIS WARRANTY DOES NOT COVER:

• Normal wear and tear
• Corrosion or rust
• Incorrect assembly, or the installation of third-party parts or accessories not compatible with the original design.
• Accidental or intentional damage, abuse or neglect, or use on stairs, travelators or escalators.
• Commercial use
• Improper storage/care of the unit

This warranty specifically excludes claims for indirect, incidental, or consequential damages. The implied warranties of merchantability and fitness for a particular purpose is according to the specific warranty period for this model unit at the time of purchase. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. To know what your legal rights are in your state, consult your local or state consumer affairs office or your State’s Attorney General.
The benefits given to you by our warranty are in addition to other rights and remedies under a law in relation to the product. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. Our goods also come with guarantees that cannot be excluded under the New Zealand Consumer Guarantees Act. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

NOTE: When contacting the Baby Jogger distributor regarding your stroller, please have your stroller’s serial number ready. It can be found on the crossbar above the basket.

IN AUSTRALIA CONTACT:
Call: 1300.661.885
Fax: 03.9873.1433
Mail: The Amazing Baby Company
7-9 Maurice Court
Nunawading, Victoria 3131
Australia| IN NEW ZEALAND CONTACT:
Call: (64) 03.338.7613
Fax: (64) 03.338.7615
Mail: Baby First Limited
25 Nga Mahi Road
Sockburn Christchurch, 8024
New Zealand
---|---

PLEASE DO NOT CONTACT THE PLACE OF PURCHASE FOR PARTS OR WARRANTY ISSUES

The Amazing Baby Company
7-9 Maurice Court • Nunawading VIC 3131 • Australia
Tel. 1300 661 885 – Tel. 03 8872 6772 • sales@tabc.com.au
www.babyjogger.com.au
Baby First Limited
25 Nga Mahi Road • Sockburn Christchurch, 8042 • New Zealand
Tel. 64 03 338 7613 • www.babyjogger.co.nz

Baby Jogger, LLC
6655 Peachtree Dunwoody Rd. NE • Atlanta, GA 30328
1.800.241.1848 • www.babyjogger.com

References

• Baby Jogger NZ | Award-Winning Safety, Quality & Design
• Baby Jogger Prams & Strollers | Adventure Boldly – Baby Jogger Australia
• Baby Jogger Prams & Strollers | Adventure Boldly – Baby Jogger Australia

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>