ERIS HOME PRODUCTS Eris Aluminum Bifold Door Instructions

ERIS HOME PRODUCTS Eris Aluminum Bifold Door

Product Information

• Product Name: ERIS Aluminum Bifold Door
• Manufacturer: ERIS Home Products
• Address: 2089 Anchor Ct. Newbury Park, CA 91320
• Website: www.erishomeproducts.com
• Email: info@erishomeproducts.com
• Contact Number: 805.375.6333

Installation Kit Contents:

• Bottom Wheel & Top Guide
• Magnet Door Holder
• Handle Set
• Frame
• Lock Knob
• Small Handle

Product Usage Instructions

Frame Assembly:

1. Find the correct frame pieces. Match each letter to the corresponding one.
2. Insert the brackets into the frame and make sure the pin gets into the hole.
3. Tighten the bracket screws equally until there is no gap between frames.
4. For low bottom track, use the longer screws that came with the frame and screw from behind the side pieces into the bottom track.

Frame Installation:

1. Apply Liquid Nail under the track and place the frame in the opening.
2. Screw the frame to the opening, ensuring the frame is level.
3. Cover the hole with a plastic cap.

Door Panels Installation:

1. Find and install the first folding panel. Ensure that when the door is closed, the holes in the picture below are inside.
2. Install the bottom wheel and top guide to the second panel.
3. Place the second panel on the track and the top guide in the frame.
4. Connect the second panel to the first panel.
5. Connect the third panel to the second panel.
6. Install panel #4 to the other side of the frame.

Hardware Installation:

1. Install the main handles to the main panel and the small handle to the first folding panel.
2. (Optional) Install a door magnet or grab catch door holder.

Fully Assembled Product:
Please refer to the user manual for a fully assembled product diagram.

If you have any additional information or questions, please contact ERIS Home Products:

• Address: 2089 Anchor Ct. Newbury Park, CA 91320
• Website: www.erishomeproducts.com
• Email: info@erishomeproducts.com
• Contact Number: 805.375.6333

INSTALLATION KIT CONTENTS

Frame Assembly

1. Find the correct frame pieces. Matching each letter to corresponding one:

2. Insert the brackets into the frame and make sure the pin gets into the hole.
   

3. Tighten the brackets screws equally until there is no gap between frames.

4. For low bottom track, use the longer screws that came with frame and screw from behind the side pieces into the bottom track.

Once frame is assembled, place it by the installation location and check the opening size and Floor level

• Recommended opening size is overall frame size + 1/2” .
• Check the door’s spec sheet to make sure frame is facing the correct way.
• For outswing door, hinge holes will be toward outside of your building and wider side of frame will be toward inside.
• For Inswing door, hinge holes will be toward inside of your building and wider side of frame will be toward outside.
• Drain holes in bottom track should always face outside.

Frame Installation

1. Apply the Liquid Nail under the track and place the frame in the opening.

2. Only Liquid Nail is recommended for bottom track for better waterproofing unless floor is not level and you will need to anchor the track to the floor.
   

3. Drill 7/16 hole into first layer of Side frames for cap and ¼” hole on the other layers.

4. Side needs 4-5 Screws ( 6” from bottom , 6” from top and other screws spaced equally along the frame).

5. Top track needs 2-3 screws spaced equally along the top piece.
   

6. Make sure frame is level. Screw the frame to the opening.
   

7. Cover hole with plastic cap.

Door Panels Installation

1. Find and install the first folding panel.

2. Usually, panels have labels and panel #1 is the first panel.

3. If the label is missing the one with 3 small holes on one side is the first panel

4. Use the 1” screws for hinges attaching to the frame.
   

5. Install bottom wheel and top guide to second panel.

6. If the label is missing the panel that has D shape handle on it is the second panel.

7. Use the 2” screws for attaching wheel and guide to the door panels.
   

8. Place the second panel on the track and top guide in the frame.
   

9. Connect the second panel to the first panel.

10. Use 2” screws for attaching hinges to the door panels.
    

11. Connect the third panel to the second panel.

12. For 3 panel doors: third panel is labeled #3 or its the one with holes for main handle and lock. Skip step 6.

13. Use the 2” screws for attaching hinges to the door panels.
    

14. For 4 panel doors : third panel is labeled #3 or its the one with small lock on side of the door as shown here.

15.  Install the panel #4 to the other side of frame.

16. Fourth panel is the panel with holes for main handle and lock.

17. Use the 1” screws for attaching hinges to the frame.

Hardware installation

1. Install the main handles to the main panel and small handle to the first folding .

2. Main lock is 3-point lock, in order to lock the door, pull up the handle, latches will engage and with turning the knob you can disable the handle. Turning the knob by itself will not engage the latches.
   

3. (Optional). Install door magnet or grab catch door holder:

4. Door holder is optional and there is no predrilled hole for it, it will be installed between last two folding panels.

5. Install it either on top or bottom of the panels.
   

FULLY ASSEMBLED PRODUCT

For additional information or questions please contact us
2089 Anchor Ct. Newbury Park, CA 91320 www.erishomeproducts.com
info@erishomeproducts.com
Office: 805.375.6333

References

• Bifold Doors | Best Price, Best Designs

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>