COMMAND LIGHT C-Lite Compact LED Spotlight User Guide

C-Lite Compact LED Spotlight
User Guide

C-Lite Compact LED Spotlight

THANK YOU
Please allow us to express a simple thank you for investing in a COMMAND LIGHT product.
As a company we are dedicated to producing the very best and most versatile flood lighting package available. We take great pride in the quality of our work and hope that you will find many years of satisfaction from the use of this equipment.
Should you have any problems with your product please do not hesitate to contact us.

COMMAND LIGHT
3842 Redman Drive
Fort Collins, CO 80524
PHONE: 1-800-797-7974
FAX: 1-970-297-7099
WEB: www.CommandLight.com

DANGER
PERSONAL RESPONSIBILITY CODE
The member companies of FEMSA that provide emergency response equipment and services want responders to know and understand the following:

1. Firefighting and Emergency Response are inherently dangerous activities requiring proper training in their hazards and the use of extreme caution at all times.
2. It is your responsibility to read and understand any user’s instructions, including purpose and limitations, provided with any piece of equipment you may be called upon to use.
3. It is your responsibility to know that you have been properly trained in Firefighting and/or Emergency Response and in the use precautions, and care of any equipment you may be called upon to use.
4. It is your responsibility to be in proper physical condition and to maintain the personal skill level required to operate any equipment you may be called upon to use.
5. It is your responsibility to know that your equipment is in operable condition and has been maintained in accordance with the manufacturer’s instructions.
6. Failure to follow these guidelines may result in death, burns or other severe injury.

Fire and Emergency Manufacturers and Services Association, Inc.
P0. Box 147, Lynnfield MA 01940 www.FEMSA.org
Copyright 2006 FEMSA. All Rights Reserved
WARNING Read this manual before installing or operating the C-Lite.
Save this guide for future reference.
Command Light
3842 Redman Drive
Fort Collins, CO 80524
PHONE: 1-800-797-7974
FAX: 1-970-297-7099
WEB: www.CommandLight.com

LIMITED WARRANTY

Five Years
COMMAND LIGHT warrants that the equipment is free from defects in materials and workmanship when used and operated for a period of five years. The responsibility of COMMAND LIGHT under this limited warranty is limited to the repair and replacement of any parts found defective. Parts must be returned to COMMAND LIGHT at 3842 Redman Drive, Ft Collins, Colorado 80524 with transportation charges prepaid (C.O.D. shipments will not be accepted).
Prior to returning defective parts to COMMAND LIGHT, the original purchaser shall make a claim in writing to COMMAND LIGHT at the above address indicating the model number, serial number and type of defect. No parts or equipment will be received by COMMAND LIGHT for repair or replacement under this warranty without specific written authority from it in advance.
Any parts damaged by improper installation, overloading, abuse or accident of any type or cause are not covered by this warranty.
All equipment manufactured by us is tested before leaving our plant, and is shipped in good working order and condition. We therefore extend to the original purchasers the following Limited Warranty for the period of five years from the original date of purchase:

1. This warranty does not apply to defects caused by accident, misuse, neglect, or wear and tear, nor can we be held responsible for incidental and consequential expense and loss, nor does this warranty apply to equipment where alterations have been executed without our knowledge or consent. These conditions are readily discernable when the equipment is returned to us for inspection.
2. On all component parts not manufactured by COMMAND LIGHT, their warranty is to the extent that the manufacturer of such component warrants them to COMMAND LIGHT, if at all. Look in your local business telephone directory for the nearest repair station for the brand of parts you have or write to us for the address.
3. If equipment received has been damaged in transit, a claim should be made against the carrier within three days, as we assume no responsibility for such damage.
4. Any service other than our Authorized Service voids this warranty.
5. This warranty is in lieu of and is intended to exclude all other warranties, express or implied, oral or written, including any warranties of MERCHANTIBILITY or FITNESS for a particular purpose.
6. Travel time paid at a maximum of 50% and only if pre-approved.

Breakage or Damage During Shipment

The transportation company is fully responsible for all shipping damage and will resolve problems promptly if you handle it correctly. Please read these instructions carefully.
Examine the contents of all shipping cases. If you find any damage, call your transportation agent at once and have them make a description on the freight or express bill describing the damage and the number of pieces. Then contact us and we will send you the original bill of lading. Also promptly contact the transportation company and follow their procedure for filing a claim. Each company will have a unique procedure to follow.
Please note, we cannot and will not enter claims for damages. If we filed claim here, it would be sent to your local freight agent for verification and investigation. This time can be saved by you filing the claim directly. Every consignee is on the ground floor, in contact with the local agent who inspects the damaged goods, and thus, each claim can be given individual attention.
Since our goods are packed to comply with the regulations of all railroad, truck, and express companies, we cannot allow deduction from any invoice because of any damage, however, be sure to file your claim promptly. Our goods are sold F.O.B. factory. We take receipt from the transportation company certifying that the goods were delivered to them in good order and our responsibility ceases.
It is seldom that any breakage or damage occurs in any of our shipments and in no case will the customer be out any expense if they follow the above instructions.
Be sure to keep all damaged goods subject to examination of the truck or express company inspector, who may call on you some time later. These damaged goods, of course, will belong to them, and they will inform you what to do with them. If you dispose of these damaged goods, your claim may not be paid.

General Description and Specifications

Electrical Wiring
The C-Lite is provided with 25 feet of 12AWG-2 Conductor Cable color coded with red and black wires. Provide a 12VDC+ signal on the red wire and a 12VDC Ground signal on the black wire to power the C-Lite. Reversing these wires may cause damage to the internal circuitry or components of the C-Lite.
A 20 amp fuse is recommended to protect the C-Lite from electrical damage.

Installation

WARNING
The C-Lite must be installed by a designated installation facility by qualified personnel only. All safety precautions must be thoroughly understood before installation. Please consult the factory for additional installation information assistance.
Included Parts
Four (4) – ¼-20 x 1” Hex Head Bolt
Eight (8) – ¼” Flat Washer
Four (4) – ¼-20 Nyloc Nut
One (1) – ½” Straight Sealcon with Nut
One (1) – Command Light Screwdriver
One (1) – User Guide
Tools Required
7/16” Wrench and Socket
Drill with assorted bits

Maintenance

Cleaning
The C-Lite is constructed with corrosion resistant aluminum and stainless steel fasteners. To further enhance corrosion resistance all exposed surfaces receive a powder coated paint finish. To assure years of trouble free service periodically clean all external surfaces with a mild detergent solution and a gentle spray of water. DO NOT USE A HIGH-PRESSURE WASHER, which will force water into sensitive electric circuitry.

Troubleshooting

If the C-Lite stops operating, disconnect and reconnect power. If operation does not resume, test for a valid 12VDC power source and ground. If this does not remedy the issue, contact Command Light at 1-800-797-7974 for Technical Support.

Wireless Option

Replacing Battery

WARNING

The wireless controller for the C-Lite is powered with a CR2032 button style battery.
Follow these steps to replace the controller battery:

1. Remove red cover grip from the controller by stretching the bottom portion around the back and sliding it towards the antenna.
2. Open the wireless controller by loosening the 4 screws located on the back of the controller.
3. Slide the old battery out of the retainer clip on the transmitter circuit board being careful to not press the “Code Set” button located above the battery.
4. Slide the new battery into the retainer clip with the + Side Up.

Options

Manual Rotation Base
If the C-Lite was ordered with the Manual Rotation Base option, it comes pre- installed. Mounting hole pattern of the Manual Rotation Base is the same as the C-Lite. This option adds 2 inches to the overall height of the C-Lite.
Electric Rotation Base
If the C-Lite was ordered with the Electric Rotation Base option, it comes pre-installed. Mounting hole pattern of the Electric Rotation Base is the same as the C-Lite. This option adds 3 inches to the overall height of the C-Lite.

Technical Specifications

Parts List – Exploded View

PARTS LIST

ITEM| QTY| PART NUMBER| DESCRIPTION
1| 7| 034-11033| NUT,NYLOCK, 1/4-20 UNC,SS
2| 1| 070-00414| NUT,CLUTCH, CLXXX
3| 1| 082-00074| ACTUATOR,12V,1000 NEWTON,100mm C-LITE
4| 1| 082-00076| COVER,ENCLOSURE, ELECT ROTATION
5| 1| 082-00078| INSERT, ACTUATOR ROTATION
6| 2| 082-00079| BLOCK, ACTUATOR
7| 1| 082-00083| CAP,ACTUATOR TRAVEL BLOCK
8| 1| 082-00084| CLAMP,CABLE
9| 1| 082-00089| SLIDE,TOP BLOCK
10| 1| 082-00121| SLIDE,RACK HYBRID
11| 1| 082-00122| RACK,TRAVEL
12| 1| 082-00123| GEAR,SHAFT
13| 1| 082-00124| BLOCK,ACTUATOR TRAVEL
14| 2| 082-00127| BLOCK,BEARING
15| 1| 082-00128| DRIVE, SHAFT
16| 1| 082-00129| GASKET, CLUTCH, C-CITE
17| 1| 082-00130| BLOCK,ROTATION
18| 1| 082-00131| ENCLOSURE, ELECT ROTATION, C-LITE
19| 1| 082-00133| SPACER, DRIVE SHAFT, C-CITE
20| 4| 034-10961| SCREW,PHP,10-24 UNIa0.5
21| 1| 034-13668| SCREW,FHPMS,1/4-20 UNC x 7/8 in,SS
22| 1| 034-11015| SCREW,HH,1/4-20×1/2,SS
23| 5| 034-11016| SCREW,HH,1/4-20×3/4,SS
24| 3| 034-11019| SCREW,HH,1/4-20×1-1/2,SS
25| 1| 034-11020| SCREW,HH,1/4-20×1-3/4,SS
26| 4| 034-11041| SCREW,HH,5/16-18×3/4,SS
27| 1| 034-11048| SCREW,HH,5/16-18×2-1/2,SS
28| 4| 034-11021| SCREW,HH,1/4-20×2,SS
29| 4| 082-00132| SPACER,TILT
30| 1| 082-00049| PLATE,BASE,ELECT ROTATION
31| 4| 034-11029| WASHER,FLAT,SAE, 1/4″, SS
32| 3| 034-11107| SCREW,FHPMS,10-24 UNC x 1 in,SS
33| 3| 034-13081| NUT,NYLOCK,THIN, 10-24 UNC,SS
34| 4| 034-10961| SCREW,PHP,10-24 UNO(0.375
35| 2| 034-13087| PIN,SPRING,1/8 x .75

PARTS UST

ITEM| QTY| PART NUMBER| DESCRIPTION
1| 2| 008-11100| FEET, ROUND, 2″, BLACK, NANO
2| 2| 034-10981| NUT,NYLOCK, 10-24 UNC,SS
3| 4| 034-11033| NUT,NYLOCK, 1/4-20 UNC,SS
4| 1| 034-11116| NUT,NYLOCK,THIN, 1/4-20 UNC,SS
5| 1| 065-12315| JUMPER,RELAY BOX
6| 4| 065-12381| BUSHING,1 IN,FLANGE 1.S,THRML POLY,SRTBL
7| 1| 065-13999| FIXTURE,LED,75W,12VDC,2 DEGREE,BLK,CLITE
8| 1| 065-14000| FIXTURE,LED,75W,12VDC,8 DEGREE,BLK,CL
9| 1| 069-14249| TRW, STRIP, 4 POLE
10| 1| 082-00054| BRACKET, MOUNT, ACTUATOR, C-LITE
11| 1| 082-00056| PIN, ROTATION, C-LITE
12| 1| 082-00059| ACTUATOR,12V,1000 NEWTON,50mm STRK,CLITE
13| 1| 082-00067| ENCLOSURE,MACHINED,1590Z162BK
14| 4| 082-00068| BLOCK,BEARING,SHAFT,C LITE
15| 2| 082-00070| ARM, ROTATOR, C-LITE
16| 2| 082-00072| SHAFT, ROTATION, C-LITE
17| 2| 082-00093| ARM,LAMP,C LITE
18| 1| 082-00094| COVER, LAMP MOUNT, C-LITE
19| 1| 082-00105| GROMMET,ID.438,OD.938,.438H for .188THIC
20| 1| 082-00134| MOUNT,ENCLOSURE,C LITE (LOW PROFILE)
21| 1| 082-00136| MOUNT, DUEL LAMP, C-LITE
22| 2| 082-00138| COVER, LAMP ARM, C-LITE
23| 2| AS568A-318| ORING,ID 0.975,SIZE 0.975,AS568A-318
24| 2| SSER-16| E-Ring, X5133-21, .027T, SS
25| 2| STD HARDWARE BHM40| SCREW,BH,HEX,6x1x12,SS
26| 8| STD HARDWARE–57| SCREW,PHP,10-24 UNCx0.5
27| 2| STD HARDWARE–61| SCREW,PHP,10-24 UNCx1
28| 8| STD HARDWARE–80| SCREW,PHP,1/4-20 UNCx0.5
29| 2| STD HARDWARE–81| SCREW,PHP,1/4-20 UNCx0.625
30| 1| STD HARDWARE–84| SCREW,PHP,1/4-20 UNCx1
31| 4| STD HARDWARE-FHMS-131| SCREW,FHPMS,1/4-20 UNC x 7/8 in,SS
32| 6| STD HARDWARE-FHSH•47| SCREW,FHSH,10-24×1,SS
33| 4| STD HARDWARE-HHCS-04| SCREW,HH,1/4-20×3/4,SS
34| 1| STD HARDWARE-IEW-69| WASHER,LOCK,18-8SS,EXTERNAL,# 10
35| 4| STD HARDWARE-SHCS-64| SCREW,SHCS,1/4-20×1-1/4,SS
36| 2| STD HARDWARE-SHCSM40| SCREW,SHCS,SHCS M4x0.7×30
37| 4| Screw, M6| SCREW,UD,M6, C-LITE

Wiring Diagram

Effective November 2022
This guide supersedes all previous versions
Wireless
3842 Redman Drive
Fort Collins, CO 80524
1-800-797-7974
www.CommandLight.com

References

• Fire Truck Scene Lights | Command Light Towers and LED Traffic Advisors

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>