poly Voyager VS80T Wireless Headphone User Manual

June 12, 2024
Poly

Regulatory Compliance Information
United States/Puerto Rico

Voyager VS80T Wireless Headphone

Declaration of Conformity/FCC Regulatory Information We Plantronics Inc, 345 Encinal Street Santa Cruz, California, 95060 USA 800-544-4660 declare under our sole responsibility that the products MODELS VS80T / BT700 / BT700C comply with Part 15 of the FCC Rules.
Operation is subject the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  1. Reorient or relocate the receiving antenna.
  2. Increase the separation between the equipment and receiver.
  3. Connect the equipment into an outlet on another circuit.
  4. Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
poly Voyager VS80T Wireless Headphone - icon 2 Made for iPhone 11 Pro Max, iPhone 11 Pro, iPhone 11, iPhone XS Max, iPhone XS, iPhone XR , iPhone X, iPhone 8 Plus, iPhone 8, iPhone 7 Plus, iPhone 7, iPhone SE, iPhone 6s Plus, iPhone 6s.

FreeRTOS software

Permission is hereby granted, free of charge, to any person obtaining a copy of this FreeRTOS software and associated documentation files (the “Software”), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

Exposure to RF Radiation

The internal wireless radio operates within the guidelines found in radio frequency safety standards and recommendations, which reflect the consensus of the scientific community. Independent studies have shown that the internal wireless radio is safe for use by consumers. Visit plantronics.com for more information. In order to comply with FCC and IC RF Exposure requirements, the base must be installed and operated such that a minimum separation distance of 20 cm is maintained between the base and all persons during normal operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environement.
NOTE: Modifications not expressly approved by Plantronics, Inc. could void the user’s authority to operate the equipment.
Canada
CAN ICES-003 (B)/NMB-003(B)
CAN RSS-216 /CRN-216

ISED Canada Regulatory Information

This device complies with ISED licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment.
Australia/New Zealand
Brazil

Argentina

Europe
Energy efficiency – EuP framework Directive 2005/32/EC and implementing measure 1275/2008 incorporating commission regulation 801/2013:
Once the headset battery is fully charged the product enters a networked standby mode. The period of time taken to enter this mode depends on how long the battery takes to fully charge. In networked standby mode the product consumes x.x Watts. The wireless network port(s) of this product are designed to be always active.

Japan
VCCI Class B statement:

Korea
R-C-PLT-VS80T
R-C-PLT-BT700
R-C-PLT-BT700C
Mexico
FCC Requirements Part 15 and IFT Operation is subject to the followingtwo conditions:

  1. This device may not cause harmful interference.
  2. This device must accept any interference received, including interference that may cause undesired operation.

Philippines

ESD-RCE-2024369
ESD-RCE-2024370
Singapore
Complies with IMDA Standards DA101619
UAE
TRA REGISTERED No: ERxxxxx/xx
DEALER No: DA0115661/13

©2022 Poly. Apple and iPhone are trademarks of Apple Inc., registered in the U.S. and other countries.
All trademarks are the property of their respective owners. Manufactured by Plantronics, Inc.
215543-37 xx.22 (DRAFT)
Recyclsble where facilities exist

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals