taurus BABEL INFINITE Digital Tower Fan Instructions

taurus BABEL INFINITE Digital Tower Fan

The BABEL INFINITE Tower Fan is a high-performance cooling device designed to provide efficient and convenient airflow in your living space. With its sleek tower design and powerful motor, it offers a refreshing breeze while occupying minimal floor space.

Product Usage Instructions:

1. On/Off: Use the switch labeled “1/a” to turn the fan on or off.
2. Speed Settings: Adjust the fan speed using the switch labeled “2/b”.
3. Timer: Set the desired timer duration using the switches labeled “3/c”, “4/d”, and “5/e”. The available options are:

• 3/c: Timer for 1 hour.
• 4/d: Timer for 2 hours.
• 5/e: Timer for 4 hours.

Please refer to the provided figures for additional information on specific features:

Figure 1: Shows the location of different controls on the fan.
Figure 2: Provides detailed instructions on using specific functions.
Figure 3: Illustrates the correct setup for optimal performance.

If you have any further questions or need assistance, please refer to the contact information below:

BABEL INFINITE Customer Support:

Avda. Barcelona, s/n 25790 Oliana Spain
Revision Date: 22/11/20

DESCRIPTION

• A Control panel
• B Air outlet
• C Front panel
• D Stand
• E Handles
• F Air intake
• G Rear cover
• H Remote control

1. a On/off
2. b Speed ​​controller
3. c Oscillation
4. d Air modes
5. e Timer

If not included with your model nozzles you need are supplied, they can be purchased separately through the service technical support.

USE AND CARE

• Before each use, completely unroll the network cable.
• It is not allowed to operate the device if the nozzles are not installed properly manner.
• Do not use the instrument with defective nozzles. They should be immediately replaced.
• Not allowed to operate electrical appliances with faulty power switches.
• Do not move the instrument during use.
• Use the handle to hold or movement of the device.
• Do not turn the instrument over if it is in use or connected to the network.
• Unplug the appliance from the mains after use or for cleaning.
• Keep this instrument out of reach from children and/or persons with disabilities in physical, sensory or mental capacity, or
• those who are not familiar with the rules use.
• Store the instrument in a dry, protected-from dust and sunlight place.
• Ensure that dust, dirt or other foreign objects do not block the appliance ventilation grille.
• Maintain the instrument in proper working condition. Check not to there were distortions and jamming of moving parts, there were no broken parts and the device worked properly.
• Do not leave the appliance on unattended. This will save electricity and extend its lifeV services.
• Not allowed to use home drying appliance animals;
• Do not use a fabric dryer

INSTALLATION

• Make sure you take out all packaging materials from the device.
• Before starting any installation or instrument assembly, make sure the fan is disconnected from the mains.
• Do not cover or block the opening device.
• The plug should be easily available when needed it could be detached.
• The instrument must be used with the properly installed stand.

INSTALLING THE BATTERIES

• ATTENTION! When inserting batteries, do not touch both poles at the same time same time, as it will cause a partial the discharge of their energy and affect battery life.
• Remove the cover from the battery compartment.
• Make sure the plastic cover, battery protector has been removed (some batteries are sold with protective coating).
• Insert the battery into the compartment, observing polarity.
• Reinstall the storage compartment cover. battery.

ASSEMBLY OF THE SUPPORT LEGS

• Connect the two housings together (Fig.1).
• Place the stand on the bottom of the floor fan. Make sure the hole in the stand is aligned with the power cord (Fig. 2).
• Attach the stand to the body of the instrument using the 4 screws supplied with the instrument (Fig. 3).
• Raise the appliance to check that the feet are properly installed.

USER MANUAL

BEFORE USE:

• Make sure you have completely unpacked the instrument.
• Prepare the electrical appliance for work.

USAGE:

• Fully unroll the cable before connecting to the network.
• Connect the device to the network.
• Turn on the device using the on/off button (1/a).
• Select the desired speed.

FAN FUNCTIONS:

• Select the desired speed using the speed selector (2/b).
• The LED indicator will display the selected speed.

AIR SUPPLY MODES:
This model has three air supply modes:

• Normal: The fan runs continuously at the selected speed.
• Breeze: The fan alternates between periods of high and low power, simulating the feeling of a light breeze. The amplitude of these switchings depends on the selected speed.
• Night: If the fan is at speed 3, it runs at speed 3 for 20 minutes, then at speed 2 for another 20 minutes, and finally switches to speed 1 until off, or until the timer expires. If the fan is at speed 2, it runs at speed 2 for 30 minutes and then switches to speed 1, where it runs until it is turned off or the timer expires. If the fan is at speed 1, it runs at speed 2 for 10 minutes and then switches to speed 1, where it runs until it is turned off or the timer expires.
• To activate this function, press the mode button (4/d).
• To disable this feature, follow the reverse procedure.

TIMER FUNCTION:

• The operating time of the device can be controlled (1-15 hours)
• To set the operating time, do so using the timer button (5/e).
• The LED indicator will mark the selected time.
• After the set time has elapsed, the device will turn off automatically.

SWING FUNCTION:

• The swing function allows you to direct the flow coming from the device so that it automatically changes direction within a range of about 45º.
• To activate this function, press the button (3/c).
• To disable this feature, follow the reverse procedure.

AFTER USE:

• Switch off the appliance with the on/off switch (1/a).
• Disconnect the device from the mains.
• Clean the device.

CARRY HANDLE(S):
This appliance has a handle on the back to make it light and easy to transport (E).

CLEANING

• Unplug the appliance after use to allow it to cool down before cleaning.
• Clean the instrument using a damp cloth and a few drops of cleaning fluid and wipe it dry.
• Do not use acid-based or high pH solvents or products such as bleach or abrasive cleaners.
• Do not allow water or other liquid to enter through the air passage holes to avoid damaging the internal parts.
• Do not place the appliance in water or other liquid, or under running water.
• If the instrument is not kept clean, its surface may be damaged, its lifespan shortened, or even use unsafe.

Avda. Barcelona, s/n 25790 Oliana Spain

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>