LG 14Z90RS Series Portable Laptop Owner’s Manual
- June 12, 2024
- LG
Table of Contents
LG 14Z90RS Series Portable Laptop
Precautions before Product Use
For the convenience of users, LG PC Manuals are provided in an electronic
format. For more information on how to use the product, refer to the LG Easy
Guide of the LG PC Manuals. The images in the owner’s manual may differ
depending on the language selected and are subject to change without prior
notice. Any malfunction in the built-in solid state drive (SSD) may result in
loss of stored data. You must back up all critical user data to an external
storage device (USB HDD, memory card, etc.). If you shut the system down
before it is completely loaded, the product may not shut down properly. Shut
down the system after it is completely loaded. (It takes about one or two
minutes to completely load the system and may vary depending on the
conditions.) While the impact-resistant Corning® Gorilla® Glass is applied to
this product, in case of excessive shock, the glass may be broken or
scratched. Please be careful when using the product. If fingerprints have come
in contact on the glass surface, moisten clean lukewarm water on a microfiber
cloth and wipe them. After that, remove water.
CAUTION If glass on the product is broken or damaged, stop its use. Since
your hand or face may get injured, make sure to contact the call center to
receive repair guidance.
Checking the Components
The components shown below are provided when you purchase the product. Check the components before use. When cleaning the product, use a cleaning agent dedicated to the PC. If you use thinner, benzene, alcohol or other similar agent, the product may be damaged ordeformed.
- The power cable (USB-C™) provided as a component only supports power supplyand the USB 2.0 specifications. Do not use it for other than power supply purposes.
Product Tour
Front
- IR LED
- Keyboard
- Webcam
- Touchpad 1
- Webcam Operation Status Lamp
- Power Button
- Built-in Microphone
When using the touchpad while the product is turned on, LEDs are turned on on
both sides. The external part of the touchpad LED cannot be used as a
touchpad.
NOTE
- You can use hot keys to use Windows more conveniently. For details, refer to the LG Easy Guide of the LG PC Manuals.
Left
Right
- Headphone Port (4-pole Ear Microphone Port 1 )
- USB-C™ Port 2 (USB 4.0 Gen 3×2 / Thunderbolt™ / Can connect to a LAN adapter / Power Port)
- Built-in Speakers
- microSD Card Slot
- USB Port (USB 3.2 Gen 2×1 3 )
- The 4-pole ear microphone port supports US 4-pole standards, but not the European 4-pole ear microphone. When using ear microphone (or Bluetooth headset), audio input and output are directed to the connected device and the microphone and speaker on PC do not work. The 4-pole ear microphone port does not support external microphone.
- Depending on the specifications of the device connected to the USB-C™ port, it acts as a USB or Thunderbolt™ port. The USB-C™ port provides Quick Charging and Always-On Charging functions for devices that support USB PD (Power Delivery).
- The name of the USB version has been changed from USB 3.1 (or USB 3.1 Gen 2) to USB 3.2 Gen 2×1. Devices that are not authorized with USB may not operate normally when connected to the USB port. The transmission speed of a USB port may differ depending on the type of storage device (NVMe™, SSD, HDD, etc.) in the system and the connected USB device.
Connecting LAN Adapter
To connect to the wired LAN, you must purchase a LAN adapter separately.
- Connect the LAN adapter to the USB-C™ port on the PC.
- The USB-C™ port can be used without having to differentiate between the top and bottom surfaces.
- Connect the network cable (LAN) to the LAN adapter.
- Check if you can connect to the internet properly.
Power Connection
The AC adapter is used to power and charge the PC.
Do not use any other AC adapter than the one that was provided when you purchased this product.
- Connect the power cable to the AC adapter main body, and connect the AC adapter to the power outlet.
- The AC adapter can be used from 100 V to 240 V.
- Connect the power cable to the USB-C™ port of the PC.
- Ensure that the power cable linked to the AC adapter and product is connected firmly.When the AC adapter is connected, the AC adapter lamp turns on.
Status | Power Lamp |
---|---|
On | When the AC adapter is connected and charging is complete. |
Blinking | When the AC adapter is connected and is charging. |
Off | The AC adapter is not connected. |
- If you try to turn on the system that has entered the Hibernates mode or been turned off after a low-battery alarm, the system will not be turned on but the lamp will blink three times. If this is the case, connect the AC adapter and charge the battery sufficiently before using it.
System Shutdown / Power Off
Press the key or [Ctrl] + [ESC] to display the Start menu. – Press the Start button > Power button and select [Shut down].
Important Safety Precautions
Check the following ‘Important Safety Precautions’ to prevent unexpected
danger or damage in advance. ‘Important Safety Precautions’ is divided into
‘WARNING’ and ‘CAUTION.’
WARNING: Noncompliance with the instruction may cause serious physical
damage or fatal injuries.
CAUTION: Noncompliance with the instruction may cause minor damage to the
body or the machine.
While Using the Product
WARNING
Guide on Battery Usage
NOTE
- This product has a built-in battery pack. After purchasing your PC, be sure to charge the battery pack completely before using it for the first time.
- The battery is a wearable good and thus the battery may not last as long as before after the battery has been used for a long time.
- The internal battery cannot arbitrarily be removed or replaced. Removing it may void the warranty.
- If you need to remove or replace the battery, visit a designated service center.
- We charge a fee for removing or replacing the battery.
Pre-Tech Support Checklist
Troubleshooting
If the following symptoms appear while using the product, check again. It may
not be a malfunction.
Symptom | Cause and Solution |
---|---|
Some of the Windows functions do not work normally or are not supported. |
• Depending on the product, some of the Windows functions may not be supported, and you may need to purchase a separate hardware, driver, or software to use the functions. Also, you may need to update the BIOS additionally. The Auto Update function of Windows is always activated. Updating Windows may incur Internet usage fees as well as additional system requirements for the storage
device or the hardware. For more information, refer to the website https://www.microsoft.com.
Part of LG Software is not installed.| • The UWP app provided by LG Electronics can be installed only through the Microsoft Store. Access Microsoft Store and search for the app to install it. For more information on the app, refer to
LG Easy Guide of the LG PC Manuals.
Symptom | Cause and Solution |
---|---|
The screen color does not display properly. | • _Check if Reader Mode |
is on._
When the Reader mode is on, turn the setting off.
– Press the Start button [ _] to turn the [All apps] > [LG Smart Assistant]
[Display Setting] > [Reader Mode] settings off._
• Using the Reader mode and the Night mode at the same time can cause color distortion. Turn the
Reader mode settings off or change the Night mode to [Off].
– Turning off Night light: Press the Start button [ ] and select Settings > [System] > [Display] > [Night light] > [Off].
• If the screen still does not properly display, contact the LG Electronics service center.
– Reader mode controls the brightness and color of the LCD screen to look like printed paper and protect the user from eyestrain.
The power does not turn on.| • Check if the power cord is connected.
• After disconnecting the power cord and reconnecting it, press the power button of the product.
• If the power is not on after reconnecting the power cord, remove the adapter and hold the power button for at least 6 seconds to reset the system. Once the system is reset, press the power button again to turn on the computer.
The system stops during use or does not properly turn off.| • Remove the adapter and press the power button for approximately 6 seconds to reset the system. Once the system is reset, press the power button again to turn on the computer.
– Caution: Unsaved data may be lost. Pressing the power button while the PC is in use may cause damage to the hard disk or a system error.
Symptom | Cause and Solution |
---|---|
The touchpad is not functioning properly. | • _Press the Start button |
and run [All apps] > [LG Smart Assistant]. Then press [Dashboard] > [Touchpad]._
• If the touchpad does not function properly, the touchpad is either in the Touchpad Off (disabled) state or Touchpad Auto (disabled when the mouse is connected) state.
– For details on the touchpad settings, refer to the LG Easy Guide of the LG PC Manuals.
The wireless network is not connected.| • Press [Fn] + [F6] to check if the wireless network device is turned off.
– Press [Fn] + [F6] to set airplane mode to [OFF]. Click the Wi-Fi icon on the right side of the
taskbar and check if AP displays properly.
• Every time you press [Fn] + [F6], the wireless network and airplane mode turn on or off.
• You may not be able to connect to a secure wireless network. Ask the wireless network administrator.
• Reinstall the wireless LAN driver.
I want to reinstall the driver.| • Press the Start button and then select
Settings > [Apps] > [Installed apps]. Then remove the driver to be reinstalled.
• Press the Start button , select and run
[All apps] > [LG Update]. Then, use the [Required Updates] or [Update list] menu to reinstall the drivers.
An error message appears.| • Check if the system is infected with a virus or malicious code.
Appendix
Registered Trademark and Open Source Information Microsoft™, MS™, WinPE™, and
Windows® are the registered trademarks of Microsoft Corporation™. USB Type-C™
and USB-C™ are trademarks of the USB Implementers forum. Intel® and Intel®
logo, Intel® Core™, Thunderbolt™ and Thunderbolt™ logo, Intel® Unison™, and
Intel® Unison™ logo are trademarks or registered trademarks of Intel and/or
subsidiaries in the United States and/or other countries. microSD® and the
microSD logos are trademarks or registered trademarks of SD-3C, LLC. Wi-Fi® is
a registered trademark of Wi-Fi Alliance Corporation. To obtain the source
code that is contained in this product, under GPL, LGPL, MPL, and other open
source licenses that have the obligation to disclose source code, and to
access all referred license terms, copyright notices, and other relevant
documents please visit https://opensource.lge.com. LG Electronics will also
provide an open source code to you on CD-ROM for a charge covering the cost of
performing such distribution (such as the cost of media, shipping, and
handling) upon email request to
opensource@lge.com. This offer is valid to anyone
in receipt of this information for a period of three years after our last
shipment of this product.
Battery take-back information
In case a rechargeable battery is included in this product, the entire device
should be recycled in compliance with rechargeable battery recycling standards
because of the internal battery. To dispose of it properly, call
800-822-8837 or visit
www.call2recycle.org.
Supplier’s Declaration of Conformity
- Trade Name: LG
Responsible Party: LG Electronics USA, Inc.
Address: 111 Sylvan Avenue, North Building Englewood Cliffs, New Jersey 07632
Email: g.environmental@lge.com.
For the safe and convenient use of the product, please read this owner’s
manual before use.
www.lg.com. Copyright © 2023 LG Electronics Inc. All
Rights Reserved
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>