YIZEELFAR S202 Sunrise Alarm Clock with Speaker User Manual
- June 12, 2024
- YIZEELFAR
Table of Contents
YIZEELFAR S202 Sunrise Alarm Clock with Speaker
User Manual
Please read this manual thoroughly before operating this device. Keep it for future reference.
Using Your Device
Step 1 Plug in E-Life machine
Connect the power cable then plug it into power outlet.
Always keep the device plugged in. 
Step 2 Download the E-life Explorer App
Download the [E-life Explorer] app on your phone or tablet.
Or you can scan above QR code to download the [E-life Explorer] App on your
phone or tablet.
Step 3 Connect Bluetooth and Complete Setup
- Open the APP, press the button.
- Click to connect E-Life BLE Bluetooth in the APP.
- Page turn to the cellphone Bluetooth Settings Page automatically
-Choose to connect E-life Bluetooth - You will hear a voice prompt” Connected * from the device. the Blue indicator light becomes steadily blue from flashing light
– Connections completed. You can open APP and set your selling routine and alarm.
Specifications
Specifications are subject to the change without notice.
Input: 100-240v 50/60Hz
USB Output: 5V=1A
Bluetooth Version: 5.3
Bluetooth Range: 30m /98 ft| Audio Output: 2 x SW
Weight: 5139/ 18 0z
Size: 187.6 x 200x 952mm
7.4 x 7.9 x 3.7 in
---|---
Buttons and Indicator Lights
Touch Sensing Control
Indicator Lights
| Alarm Indicator light | White color | Alarm Turn on |
|---|---|---|
| off | No Alarm | |
| Sleep Indicator light | Green color | Sleep Turn on |
| off | No Sleep/ Bluetooth Mode | |
| Bluetooth Indicator light | Steady blue | Bluetooth Connected |
| Flash blue | Bluetooth disconnected |
Light Modes
E-Life device features 5 light modes. You can setting the light modes in the APP.
Mode 1| Streaming
Light color charging smoothly
---|---
Mode 2| Breathing
Light color changing softly like breathing.
Mode 3| Rainbow flowing
Light gradually become bright, fade, then change to another color and cycle.
Mode 4| Fade
Light gradually become bright, fade, then change to another color and cycle.
Mode 5| Reading
whit light for reading.
- You can specify one color in the Light setting interface of APP, just click the color on the color disk.
- You also can long press the Light mode button the device to fix a light color.
Important Tips
- For indoor use only.
- Make sure the adapter does not get wet.
- Do not immerse the appliance in water or rinse under the tap.
- Do NOT use the appliance if the lamp housing, power cord or plug is
- Do NOT run the power cord under carpeting. rugs or other floor
- Do NOT route power cord under appliances or furniture.
- Do NOT use this appliance near water or in wet environments. Such as in the bathroom, swimming pool. faucet or basin, which may cause risk of Water and electricity are a dangerous combination.
- Do NOT place this appliance in areas that are exposed to direct sunlight or close to heat sources such as radiators, heat registers or stoves.
- Do not use the adapter in or near a power outlet that contains an electric air freshener to prevent damage to the adapter
- Do not look directly at lighted lamp.
- Protect the power cord from being walked on or pinched, particularly at plugs, outlet and point where they exit from lamp
- The appliance has no on/off switch. To disconnect the appliance from the power source, remove the plug from the wall outlet when it is unused for an extended period of time or when moving the device.
- Clean this appliance regularly with a soft, dry cloth. Do not use any liquids or sprays (including solvents, chemicals or alcohol) or abrasives to
What’s in the box
- The clock will synchronize the time of cellphone after cellphone connected to device via Bluetooth.
- The device must be connected to the APP (cellphone) via Bluetooth, then you can set the Sleep and Alarm in App for the device
- After completing the setting. you can disconnect the device from cellphone. The Sleep and Alarm setting will play at the setting time.
- You can specify one color in the light setting interface of APP. Just click the color on the color disk.
- Or you can long press the Light mode button on the device to fix a light color.
- You can set different volumes for sleep and Alarm sound in the separate setting interface.
- For the 3 indicator lights below the Time Display. you can choose a proper Display Brightness in the APP before sleep.
- Tap any button on the device to get more 11 mins snooze when the alarm sound is playing at the set time. The lamp stays on. but the alarm sound stops. After 11 minutes. the alarm will automatically play again.
- Choosing the Bluetooth Mode, you can play the audio of your cellphone when the device connected to smartphone.
- Long press the Button on the device to disconnect from the current cellphone, then you can connect the device to another cellphone.
- Long press the set Sleep routine or Alarm in the App. you can delete the Sleep or Alarm.
Troubleshooting
Device re-connected with Smartphone via Bluetooth, but why can’t set
the APP?
Solution: That’s because the device does not connect with the APP. If the
device dis-connected with your phone or tablet, you long press the top button
on the device to re-connect the Bluetooth, but the device does not re-connect
the APP E-life BLE. you need to open the APP and connect the E-life BLE in the
APP manually.
Why the device does not play at the set Sleep time or Alarm time?
Solution: That’s because your Sleep and Alarm routine was not set validly
and successfully. The device may be dis-connected with APP, even though your
device connects with your phone Bluetooth.
Why can’t find Bluetooth E-life BLE in the APP?
Solution: Open the cellphone Bluetooth Settings page and connect Bluetooth
E-life: back to APR click the Bluetooth icon on the top left corner to
connect E-life BLE.
If this doesn’t work please plug out and re-plug the device in. Re-connect
the Bluetooth again.
Caution
- Close supervision is necessary when this appliance is used by. or near children or persons with mobility impairment.
- Children should be supervised to ensure that they do not play with the
- Do not drop the appliance on the floor, hit it hard.
- Place the appliance on a stable. level and non-slippery surface.
- Do not use this appliance as a means to reduce your hours of sleep.
- The purpose of this appliance is to help you wake up more easily. It does not diminish your need for sleep.
- This adapter transforms 100-240 volts to a safe. low voltage of less than 24 volts.
- The appliance is suitable for a voltage of 120 Vac and a frequency of 50/60 Hz
Safety Instructions
- For indoor use only.
- Make sure the adapter does not get wet.
- Do not immerse the appliance in water or rinse under the tap.
- Do NOT use the appliance if the lamp housing. power cord or plug is
- Do NOT run the power cord under carpeting, rugs or other floor
- Do NOT route power cord under appliances or furniture.
- Do NOT use this appliance near water or in wet environments. Such as in the bathroom, swimming pool, faucet or basin, which may cause risk of Water and electricity are a dangerous combination.
- Do NOT place this appliance in areas that are exposed to direct sunlight or close to heat sources such as radiators, heat registers or stoves.
- Do not use the adapter in or near a power outlet that contains an electric air freshener to prevent damage to the adapter.
- Do not look directly at lighted lamp.
- Protect the power cord from being walked on or pinched. particularly at plugs. outlet and point where they exit from lamp
- The appliance has no on/off switch. To disconnect the appliance from the power source, remove the plug from the wall outlet when it is unused for an extended period of time or when moving the device.
- Clean this appliance regularly with a soft dry cloth. Do not use any liquids or sprays (including solvents, chemicals or alcohol) or abrasives to
Customer Service
12-month
limited warranty| Lifetime
technical support| Email
support@yizeelfar.com| Tel
1(9371288-6338