Kmart 43285334 Embroidery Hoop Kit Instruction Manual

Kmart 43285334 Embroidery Hoop Kit

Embroidery Hoop Kit – Native Floral

Kit Includes

• 1 x printed fabric
• 7 x embroidery threads
• 2 x embroidery needles
• 1 x 16cm bamboo hoop

Guide Image

Before You Begin

• Prepare the fabric on the embroidery hoop by separating the 2 circles and laying the fabric over the inner one. Place the larger circle over the top and press down to secure the fabric. Adjust the fabric position to ensure the design is centred.
  Tighten the screw and gently pull the fabric edges to ensure ifs taut. Do not pre-wash the fabric.

• Embroidery thread is made up of 6 strands of thread twisted together. We recommend using 2 strands of thread cut into 1-meter lengths to be more manageable.

• To separate the threads, pinch the end of the thread in between your thumb and forefinger to spread out the strands.
  Take 2 strands in your other hand and pinch the remaining thread in between your thumb and forefinger and gently pull the 2 strands of thread up. Continue to slowly pull until entirely separated. The thread will gather, but it should not tangle.

• Begin your embroidery by following the guide image for colour and stitch reference. It may be helpful to practice stitch types before beginning. Tie a knot to start and end your thread.

• To complete your hoop, turn it over and trim the excess fabric from the edges. Alternatively, trim the fabric and fold it over the inner part of the back side of the hoop. Use hot glue to secure the fabric.

Learning The Stitches

Long Stitch

1. Bring the needle up where you want to begin stitching at A and then insert at B. Continue to fill the shape with stitches.

Colonial Knot

1. Bring needle up at A,wrap the thread around the needle once as shown.
2. Pull the thread and insert the needle back into the fabric, close to the original hole.
   Pull the needle and thread all the way through the fabric to create a colonial knot.

Turkey Stitch

1. Insert the needle at A and pull the thread through. Bring the needle up at B, then insert at C and back up at D.
2. Pull the thread through and insert the needle at E, next to C.
3. Pull the thread through and bring the needle up at C. Then insert at F and pull through at E. Leave some length of thread at top to create a loop.
4. Pull the thread through and insert the needle at G and pull back through at H. Leave some length of thread at the top to create a loop.
5. Repeat steps 1-4 to keep making turkey stitches.
6. When complete, cut through the folded thread loops to create a tassel effect,

Long And Short Stitch

1. Bring the needle up where you want to begin stitching at A. Insert at Bat a slight diagonal and pull through at C (halfway between A and B). Pull the thread through to form the first stitch.

2. For row 1, working along the edge of the shape, make stitches next to each other, alternating between long and short stitches.
   The short stitches should be half the length of the long stitches.

3. For row 2, work long stitches in the spaces created by the short stitches.

4. Continue with more rows until you’ve reached the opposite side of the shape.

Stem Stitch

1. Bring the needle up where you want to begin stitching at A. Insert the needle at Bat a slight diagonal and pull through at C (halfway between A and B).
2. Repeat stitches, keeping the thread on the left side of the needle and making sure stitches are the same length.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>