TRUPER 46612 EMP-100S Ecessed Luminaires Fixed Spot Instruction Manual

TRUPER 46612 EMP-100S Ecessed Luminaires Fixed Spot

Product Information

The product is a recessed fixture for lighting purposes. It operates on a voltage of 12V~ or 127V~ with a frequency of 60Hz. The current required is 390mA, and the maximum power consumption is 50W. The lamp type used is a halogen MR-16 with a bipin GX5.3 base.

Product Usage Instructions

1. Using the suggested tool, drill a hole in the desired location for embedding the fixture.
2. Place the fixture in the correct position, ensuring it fits securely.
3.  Connect the lamp holder and make sure the wires are notentangled.
4. Insert the fixture into the drilled hole.
5. Remove the safety clip from the fixture.
6. Connect the lamp to the lamp holder.
7. Add the safety clip to secure the lamp.
8. For a 127V~ lamp, refer to the provided diagram for installation.
9. For a 12V~ lamp, refer to the provided diagram for installation.
10. Ensure a minimum mounting distance of 1.6 ft between fixtures.
11. If using a transformer, it is not included with the product and should be installed according to the instructions provided separately.
    Please read the instruction manual completely before using the device and keep it for future reference.

INSTRUCTIONS

Read this instruction manual completely before using the device and keep it for future reference.

SPECIFICATIONS

• Voltage: 12 V~ / 127 V~
• Frecuency: 60 Hz
• Current: 390 mA
• Power: 50 W Max.
• Lamp type: Halogen MR-16
• Base: Bipin GX5.3

CAUTION

• For 12 V~ lamp requires a transformer (not included)• Disconnect the power supply during installation.
• Use gloves or a cloth when handling the lamp or fixture, as they can become hot and cause burns.
• The electrical characteristics of the fixture can be found on the product marking

NSTALLATION

Suggested tool

1. Dimensions
2. Drill in the selected location for embedding

3. Place the fixture in the correct position
4. Connect the lamp holder and make sure that the wires are not entangled
5. IInsert the fixture.

6. The safety clip must be removed
7. Connect the lamp to the lamp holder
8. Add safety clip

9. Minimum mounting distance
10. Diagram to install a 127 V~ lamp

11. Diagram to install a 12 V~ lamp

Imported by Truper, S.A. de C.V. Parque Industrial 1, Parque Industrial Jilotepec, Jilotepec, Edo. de Méx. C.P. 54257 Made in/Hecho en China, Tel.: 76 1782 9100. www.truper.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>