LG CM9960 Powerfull X Boom Pro DJ Machine User Guide

June 12, 2024
LG

LG-LOGO

LG CM9960 Powerfull X Boom Pro DJ Machine

LG-CM9960-Powerfull-X-Boom-Pro-DJ-Machine-Product-Img

To view the instructions of advanced features, visit http://www.lg.com and then download Owner’s Manual. Some of the content in this manual may differ from your unit.

What’s In the Box

LG-CM9960-Powerfull-X-Boom-Pro-DJ-Machine-Img-1

Front Panel

LG-CM9960-Powerfull-X-Boom-Pro-DJ-Machine-Img-2

  1. Disc tray

  2. Remote Sensor

  3. HEADPHONE
    Connects a headphone.

  4. PORT.IN
    Connects a portable device.

  5. DANCE LIGHTING (Lighting ball)

    • Shows the various lighting patterns and colors.
    • You can control the angle up and down with your finger.
  6. MIC 1/2
    Connects a microphone.

Rear Panel

LG-CM9960-Powerfull-X-Boom-Pro-DJ-Machine-Img-3

  1. Power cord

  2. AUX IN 1/2 (L/R)

  3. ANTENNA (FM)

  4. R SPEAKERS
    Connects the right speaker’s cables.

  5. L SPEAKERS
    Connects the left speaker’s cables.

  6. SPEAKER LIGHTING
    Connects the speaker lighting cables.

Speaker Connection

LG-CM9960-Powerfull-X-Boom-Pro-DJ-Machine-Img-5

Additional Information

Specifications
Power Requirements Refer to the main label on the unit.

__

__

Power Consumption

| Refer to the main label on

_ ___the unit.

Networked standby : 0.5 W

(If all network ports are

_ ___activated.) _ ___

Dimensions (W x H x D)| Approx.

470 mm x 240 mm x 420 mm

Net Weight| Approx. 7.7 kg
Bus Power Supply (USB)| 5 V 0 500 mA
Amplifier

(Total RMS output

power)

| __

4,800 W

Design and specifications are subject to change without notice.

Top Panel

LG-CM9960-Powerfull-X-Boom-Pro-DJ-Machine-Img-6

  1. (Power)

  2. SCRATCH / LEVEL CONTROL, SEARCH KNOB (A SIDE)

    • Turns clockwise or counterclockwise to make the scratch sound.
    • Turns clockwise or counterclockwise to control the DJ EFFECT level.
    • Turns clockwise or counterclockwise to search to the next/previous file or next/previous folder. (CD/USB 1 only)
  3. SEARCH (A SIDE)
    Searches to the next/previous file or next/previous folder by pressing SEARCH repeatedly. (CD/USB 1 only)

  4. OK (A SIDE)
    Selects the desired file or folder after searching a file or folder. (CD/USB 1 only)

  5. H/P MODE
    Presses to select a headphone monitor mode.

  6. H/P VOLUME
    Presses to select a headphone’s volume control mode.

  7. MIC VOLUME
    Presses to select a microphone’s volume control mode.

  8. BASS BLAST
    Selects BASS BLAST effect directly.

  9. LIGHTING
    Changes the lighting patterns and colors or turns off the lighting effects of DANCE LIGHTING and SPEAKER LIGHTING.

  10. DJ PRO PAD
    Presses a desired sound pad.

  11. AUTO SYNC
    When using MIX, you can synchronize the tempo of audio files being played in USB 1 and USB 2 by pressing AUTO SYNC.

  12. Cross fader
    Adjusts the sound volume of mixing files when using MIX ON by pressing MIX.

  13. MIX
    Mixes audio sound.

  14. PARTY THRUSTER
    Slide the lever to create a party atmosphere.

  15. REGION EQ
    Chooses region equalizer.

  16. EJECT
    Opens and closes the disc tray.

  17. KEY CHANGER (b/#)
    Changes the key to suit your vocal range.

  18. VOICE CANCELLER
    You can enjoy the function while playing the music, by reducing singer vocal of music in the various source.

  19. SEARCH (B SIDE)
    Searches to the next/previous file or next/previous folder by pressing SEARCH repeatedly. (USB 2 only)

  20. OK (B SIDE)
    Selects the desired file or folder after searching a file or folder. (USB 2 only)

  21. SCRATCH / LEVEL CONTROL, SEARCH KNOB (B SIDE)

    • Turns clockwise or counterclockwise to make the scratch sound.
    • Turns clockwise or counterclockwise to control the USER EQ level.
    • Turns clockwise or counterclockwise to search to the next/previous file or next/previous folder. (USB 2 only)
  22. F / WIRELESS LINK

    • Selects the function and input source.
    • Press and hold for 3 seconds to select WIRELESS PARTY LINK mode.
  23. USB REC / DEMO

    • Records to USB 1.
    • Copies USB 2 to USB 1.
    • Shows DEMO mode.
  24. USER EQ
    Selects the sound effect created by your own.

  25. Basic controls (USB 2 only)

Skips Fast backward or Forward. / Searches for a section within a track/file by pressing and holding.

Starts or pauses playback.

Stops playback or cancels DELETE function.

  1. A / B TEMPO
    Adjusts TEMPO in USB function.
    VOLUME
    Adjusts speaker, microphone or headphone volume.

  2. USB 1 A / USB 2 B
    You can play or record sound files by connecting the USB device.

  3. Basic controls (CD / USB 1 / BLUETOOTH / RADIO only)

  * Skips Fast backward or Forward. / Searches for a section within a track/file by pressing and holding.
  * Selects the radio stations.  

  * Starts or pauses playback.
  * Selects STEREO/MONO.  

  * Stops playback or cancels DELETE function.
  1. DJ EFFECT
    Selects a desired DJ EFFECT.

Caution

  • When you use the multiple socket, it is advisable to use 15 A socket. 10 A socket may cause power off due to lack of power supply.
  • Do not place objects on the speakers. It may cause the objects to fall and make property damage.
  • Install the speakers on a firm surface not to slide. The vibration caused by the strong output can shake and move the speakers.
  • Avoid turning up max volume in a small enclosed space. The powerful and intense output of the speakers can shake the ceiling and get the objects in the room falling.
  • To protect from hearing damage, keep the sufficient distance from the speaker. The overwhelming sound from the speaker may cause a person’s hearing damage.
  • Allow more than 20 cm of free space between the main set and the speakers when you install the main set on the ground. High sound pressure from the speakers can make the set tremble to disturb the CD playback.
  • Connect the power cord to wall outlet directly if possible. Or when you use an extension cable, it is highly recommended to use an extension cable of 110 V / 15 A or 230 V / 15 A, otherwise the unit may not operate properly because of the lack of power supply.
  • Do not overload the extension cord with excessive electrical load.

Note

  • Do not look directly at the light emitting part when the LIGHTING is turned on.
  • If the illumination brightness is glaring, switch on the room lights or turn off the LIGHTING of the unit.

Grounding

(Except for devices which are not grounded.) Ensure that you connect the earth ground wire to prevent possible electric shock (i.e. a Audio with a three- prong grounded AC plug must be connected to a three-prong grounded AC outlet).

If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes.

How to disconnect the wireless network connection or the wireless device
Turn off the unit by pressing the power button for more than 5 seconds.

Replacement of battery

About Ferrite Core (Optional)

LG-CM9960-Powerfull-X-Boom-Pro-DJ-Machine-Img-13

Wind the L SPEAKERS cables around the ferrite core twice. Wind the R SPEAKERS cables around the ferrite core twice. Wind the LEFT and RIGHT SPEAKER LIGHTING cables all together around the ferrite core twice.

Download the Music Flow Bluetooth App to your device.
For more information, download the online owner’s manual. http://www.lg.com

FAQ’s

What is the power output of the LG CM9960 Powerful X Boom Pro DJ Machine?

The LG CM9960 Powerful X Boom Pro DJ Machine has a power output of 4800 watts.

Does the CM9960 support Bluetooth connectivity?

Yes, the CM9960 supports Bluetooth connectivity, allowing you to wirelessly stream audio from compatible devices.

Can I connect a microphone to the CM9960 for karaoke or announcements?

Yes, the CM9960 has microphone inputs, allowing you to connect and use microphones for karaoke or announcements.

What audio formats does the CM9960 support?

The CM9960 supports various audio formats, including MP3, WMA, AAC, FLAC, and more.

Does the CM9960 have built-in DJ effects?

Yes, the CM9960 features built-in DJ effects, allowing you to add effects and enhance your music playback.

Can I record audio directly from the CM9960?

Yes, the CM9960 has a recording function that allows you to record audio from various sources, such as CD, USB, or FM radio.

Does the CM9960 have a built-in radio tuner?

Yes, the CM9960 has an FM radio tuner, allowing you to listen to your favorite radio stations.

Can I connect external devices, such as TVs or gaming consoles, to the CM9960?

Yes, the CM9960 has multiple audio input options, including RCA and optical inputs, allowing you to connect external devices.

Does the CM9960 support party chain function for multi-unit connection?

Yes, the CM9960 supports party chain functionality, enabling you to connect multiple units together for synchronized audio playback.

Does the CM9960 come with a remote control?

Yes, the CM9960 comes with a remote control for convenient operation from a distance.

Are there built-in lights or visual effects on the CM9960?

Yes, the CM9960 features built-in party lights and visual effects, adding a dynamic element to your music experience.

Does the CM9960 have wheels or handles for easy transportation?

Yes, the CM9960 is equipped with wheels and handles, making it easier to transport and move around.

Download This PDF Link:LG CM9960 Powerfull X Boom Pro DJ Machine User Guide

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals