Mircom BB-4002R Multi Module Enclosures Installation Guide
- June 12, 2024
- Mircom
Table of Contents
Mircom BB-4002R Multi Module Enclosures
Product Information
BB-4002R
The BB-4002R is a multi module enclosure designed for 1 or 2 MIX-4000-M Series Modules. It features a back box and a red door.
BB-4006R
The BB-4006R is a multi module enclosure designed for up to 6 MIX-4000-M Series Modules. It also features a back box and a red door.
Please refer to the module manual for mounting instructions.
BB-4002R Dimensions and Wiring
- Back view dimensions: 12 3/4″ x 9 7 1/5″
- Bottom view dimensions: 3 13/16″ x 9 31/32″
- 4 knockouts on top
- 4 knockouts on bottom
BB-4006R Dimensions and Wiring
- Dimensions: 12 1/2″ x 8 1/2″ x 10 1/2″
- Optional ground screw (use either ground screw)
- 2 knockouts on top
- 3 knockouts on the side
- Knockouts on back
- 2 knockouts on bottom
Product Usage Instructions
Cable Routing in BB-4002R
To ensure proper cable routing, maintain a minimum separation of 1/4″ (6.4 mm) between power-limited and non-power-limited wiring at all times.
Example #1
For non-power-limited wiring, route the cables in the gray area. No power- limited wiring should be placed in this area.
Example #2
For power-limited wiring, route the cables in the green area. The right side of the box is reserved for all power-limited wiring. Non-power-limited wiring should be kept separate.
Cable Routing in BB-4006R
To ensure proper cable routing, maintain a minimum separation of 1/4″ (6.4 mm) between power-limited and non-power-limited wiring at all times.
Example #1
For non-power-limited wiring, route the cables in the gray area. No power- limited wiring should be placed in this area.
Example #2
For power-limited wiring, route the cables in the green area. The right side of the box is reserved for all power-limited wiring. Non-power-limited wiring should be kept separate.
BB-4002R: Back Box and Red Door for 1 or 2 MIX-4000-M Series Modules
BB-4006R: Back Box and Red Door for up to 6 MIX-4000-M Series Modules
Refer to the module manual for mounting instructions.
Dimensions and Wiring
BB-4002R
Back view
Bottom view
Front view
BB-4006R
Cable Routing
Cable Routing in BB-4002R Example #1
Maintain a separation of 1/4” (6.4 mm) minimum between power-limited and non- power-limited wiring at all times.
Cable Routing in BB-4002R Example #2
Maintain a separation of 1/4” (6.4 mm) minimum between power-limited and non- power-limited wiring at all times.
Cable Routing in BB-4006R Example #1
- Maintain a separation of 1/4” (6.4 mm) minimum between power-limited and non-power-limited wiring at all times.
- Gray area marks the location for all non-power-limited wiring.
- Green area marks the location for all power-limited wiring.
- Right side of box is reserved for all power limited wiring.
Cable Routing in BB-4006R Example #2
- Maintain a separation of 1/4” (6.4 mm) minimum between power-limited and non-power-limited wiring at all times.
- Gray area marks the location for all non-power-limited wiring.
- Green area marks the location for all power-limited wiring.
- Right side of box is reserved for all power limited wiring.