PRODVX APPC-22XP-R23 Android 8 Display PoE Inshop Digital User Guide

PRODVX APPC-22XP-R23 Android 8 Display PoE Inshop Digital

Product Information:

The APPC-22XP R23 is a Panel PC that comes with a quick start guide. It is recommended to refer to the website or scan the QR-code provided for more detailed product information. The package includes the Panel PC and the quick start guide. Please note that tools necessary for installation are not included.

This package contains:

Product Usage Instructions:

How to start:

1. Step 1: Take the contents out of the box and ensure that all components are present.
2. Step 2: Install the wall/glass mount or desk stand according to the instructions provided in the designated mount/stand manual.
3. Step 3: Connect to the Internet either through Wi-Fi or PoE+.
4. Step 4: If applicable, install and configure your preferred application.

Panel PC Ports and Buttons:

The Panel PC has the following ports and buttons:

• On/off switch
• 12 V DC-in
• LAN port
• Audio port
• 3.5 mm S/PDIF port
• USB-C port
• Mini HDMI out
• COM port 2
• COM port 1
• USB 3.0 port
• USB 2.0 port

The bottom view of the Panel PC includes:

• Speaker
• VESA 100 mounting frame
• SD-card slot with USB 2.0 port
• Speaker
• Volume + and – buttons
• Back/home button
• Pogo pin connector
• Scroll up/down button

Quick connection settings

The backside of the Panel PC includes quick connection settings and optional accessory ports:

1. Step 1: Plug in the PoE+ cable or power adapter to turn on the display. If using PoE+ for both power and data, this is the final step. If you prefer to connect to Wi-Fi, swipe up in the home menu to access the app drawer.
2. Step 2: In the settings menu, go to Network & internet, located at the top of the menu.
3. Step 3: In the Network & internet menu, select Wi-Fi.
4. Step 4: Turn on Wi-Fi and select the desired Wi-Fi network to connect to the Internet.
   Note : If using ADB, remember to turn off the ADB functionality after use.
   

Optional Accessories:

The APPC-22XP R23 Panel PC supports optional accessories such as:

• Landscape or portrait orientation
• Barcode scanner
• NFC module
• Camera
• RGB LED bar

Caution and Warning:

Please note that this product contains a battery. For proper replacement of the battery, return the product to a certified repair center. Disposal of the battery can be dangerous. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE : This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area can cause harmful interference in which case the user will be required to correct the interference at his own expense.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Europe/UK – EU/UK Declaration of Conformity
This device complies with the essential requirements of the Radio Equipment Directive (2014/53/EU). The following test methods have been applied in order to prove presumption of conformity with the essential requirements of the Radio Equipment Directive This equipment is compliant with Class A of EN55032. In a residential environment this equipment may cause radio interference.

Correct Disposal:
This product should not be disposed of with other household waste. To prevent harm to the environment and human health, recycle it responsibly. Return your used device using the return and collection systems or contact the reseller where the product was purchased for safe recycling.

FCC & CE RF Radiation Exposure Statement:

To maintain compliance with the FCC & CE’s RF exposure guidelines, place the product at least 20cm away from nearby persons. The suitable temperature for the ProDVX Display and accessories is 0°C-45°C.

References

• Support | ProDVX

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>