Nixe TW003 Black Silver Hair Trimmer User Manual

Nixe TW003 Black Silver Hair Trimmer

INTRODUCTION

Thank you for purchasing this product
We are sure you will appreciate the care taken in designing and implementing it. We constantly research and combine innovation and technology to create high-quality products. We apply the most advanced methods and use the best materials to always obtain excellent performance. We offer products designed for the most demanding customers who want to achieve excellent results. Read these instructions carefully before using the appliance and keep them for future reference.

Warnings
Please read the following warnings and the rest of the manual carefully before using the appliance.

1. Give sufficient time for the battery to fully charge.
2. This product contains batteries that cannot be replaced by the user. Batteries may only be replaced by service or qualified persons.
3. The cutting machine should be used only with the supplied power supply (MODEL LW-050100EU).
4. IMPORTANT! Cleaning and maintenance of this appliance must not be carried out by children without supervision. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children should not play with the cutting machine.
5. This appliance is intended for professional use.

IMPORTANT! Failure to follow all these warnings and instructions may cause irreparable damage to the product and jeopardize the user’s safety.

This symbol indicates that this product should not be treated as normal household waste. Once you have decided to dispose of it, you should take it to a dedicated collection point for the recycling of electrical appliances. By recycling batteries and electrical appliances correctly, we help to prevent health hazards and protect the environment. If this product is irreparably damaged or, for any reason, its useful life is deemed to have expired, please have a look at local, state and European regulations regarding the proper disposal and recycling of products containing lead, batteries, plastics and other materials, as well as collection points for these types of products. This product contains Lithium-Ion batteries. This product complies with the CE Marking. You can find the European Declaration of Conformity on the web link wadprofessional.com/wad-nixe-black-silver-hair-trimmer- ce.pdf. This manual is available in digital format at wadprofessional.com/wad-nixe- black-silver-hair-trimmer-user-manual.pdf.

Technical specifications Nixe Black Silver Cutting Machine

(MODEL TW003)

• Input voltage of AC/DC adapter 100-240 V
• Frequency 50/60Hz, 0,2 A
• Power 10 W
• Speed 7000 rpm
• DC motor
• 1800 mAh lithium battery
• 150 min usage time
• Charging time 2.5 hours
• 3Cr13 steel blades
• 4 combs 1,5 / 3 / 6 / 9 / 9 mm
• Cutting lengths 0.2 mm
• Lifetime 500 hours
• DC motor
• Weight 171 g
• Noise <68 dB
• Slat temperature <50ºC
• Includes lubricant and brush

BDN Cosmetics S.L. · C/ de la Mora 22 08918 Badalona, Spain

Instructions for use

COMPONENTS:

How to load the machine

1. Connect the charger cable to the connector at the bottom of the cutting machine.
2. Connect the power plug to the mains. The indicator light on the cutting machine will illuminate red. When the light changes to green, charging is complete.

Before using the machine for the first time, fully charge the battery. Once the battery is charged, do not keep the machine connected to the mains for any longer. Turn the button to the ON position and you can start using it.

Use of the cutting machine

1. Before using the machine, put a few drops of lubricating oil on the blades.
2. Press the power button to start the blades.
3. Pass the machine over the desired cutting area.
4. Press the off button when you have finished the job.

Cutting with 5 measures

You can use the machine to cut without a comb or use one of the 4 combs with sizes 1.5, 3, 6 and 9 mm. To adjust the hair size, just select the right comb.

Adjusting the blades and combs

To dismantle the combs:

• Simply pull the comb tightly from point (2).

To install the combs:

• Align the edge of the comb with the edge of the blade (1) and push forward slightly to assemble (2).

In both cases always make sure that the machine is switched off.

Removal and installation of the blades

Removal of the blades:

1. Remove the screws with a screwdriver; loosen and remove the cutting head.
2. To prevent the blades from falling, use the other hand to hold them.

Removal and installation of the blades

Installation of the blades:

1. The blade spring (A) must be aligned with the top of the blade (B).
2. Then fit the two fixed screws and hold them tight.
3. Tighten the screw with a screwdriver to ensure that the blade head does not fall off.

TIP: Do not disassemble the blade head if you do not think you are qualified to do so.

Cleaning and Maintenance

Cleaning of the blades:

• Clean the blades with the cleaning brush provided.

Blade maintenance:

• Before or after use, apply a few drops of oil as shown in the picture.

VISIT US:wadprofessional.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>