MICKEY MOUSE XTH-D660MK Wireless Headphones User Manual
- June 12, 2024
- MICKEY MOUSE
Table of Contents
MICKEY MOUSE XTH-D660MK Wireless Headphones
Product Information
- Product Name: XTH-D660MK Wireless headphones
- Description: Stereo headphones with microphone and wireless technology
- Language: English
Product Overview
- Next track/volume +: To increase the volume level press and hold this button. Press this button to play the next track.
- Previous track/volume -: To lower the volume level press and hold this button. Press this button to play the previous track.
- Phone: Press this button to answer an incoming call or end it.
- Power/play/pause: Press and hold this button for 3 seconds to power on or off the headphones. Press this button once to play or pause audio.
- LED indicator
- 3.5mm auxiliary input port
- Microphone
- Micro USB charging port
**Troubleshooting
**
If you cannot connect the headphones to your phone, ensure thatthere are no obstructions between the headset and the phone, such as walls or other electronic devices.
- Ensure that the headphones are charged, switched on, paired with, and connected to your phone.
- Make sure that the Bluetooth® feature is activated on your phone.
- Check that the headphones are within 30 feet of your phone and that there are no obstructions between the headset and the phone, such as walls or other electronic devices.
Technical Specifications
- Headphone Form factor: On-ear
- Driver unit: 40mm
- Maximum power output (R.M.S.): 40mW
- Frequency response: 100Hz~20kHz
- Signal to noise ratio: 80dB
- Impedance: 32
- Sensitivity: 119+-3dB
- Color: Black
- Microphone Form factor: Built-in
- Directivity: Omnidirectional
- Frequency: 100Hz-10kHz
- Impedance: 680
- Sensitivity: -42dB +-3dB
- Battery Type: 250mAh rechargeable ternary polymer lithium battery
- Charging time: 1.30 hour
- Run time: Up to 8 hours*
- Standby time: 30 hours
- Charging method: Micro USB (5V)
- Additional information: **3.5mm stereo cable not included
*Estimated battery run time depending on usage and volume settings
Package Contents:
- Wireless headphones (1)
- Micro USB charging cable (1)
- User guide (1)
Warranty
The warranty information is not provided in the given text.
For more information, visit:
www.xtechamericas.com
Introduction
Thank you for purchasing the Xtech XTH-D660MK Disney Mickey Mouse wireless
headphones with wireless technology. By pairing it with mobile audio devices
enabled with Bluetooth®, the headphones offer great audio quality, excellent
performance, and the freedom of listening to music or taking calls easily
everywhere you go.
We encourage you to thoroughly read this user guide to get the most out of
this portable wireless audio device.
Main features
- Stereo headphones with microphone and wireless technology
- Wirelessly stream audio from a smartphone, tablet, or computer
- Built-in rechargeable battery provides up to 8 hours of continuous playtime
- Built-in microphone for talking with friends and family
- Adjustable headband and padded ear cushions for maximum comfort
- Aux-in jack function to connect the headphones to a device and keep the music on
- 40mm drivers deliver detailed and natural sound from various audio sources
- On-board controls for power, music, and phone call management
- Earcups fold flat 90 degrees for easy portability
- Foldable design for practical transport
Advanced operation
Pairing your headphones with a mobile device
- Press and hold the power button for 3 seconds to turn on the headset. When powering up for the first time, the headphones are discoverable for 2 minutes and are ready for pairing. The LED indicator alternately flashes green and blue.
- Set your Bluetooth® phone to ‘discover’ the wireless headphones.
- Place the phone and headphones within one meter from each other.
- Select the XTH-D660MK headphones from the list of newly discovered devices in your phone.
- Your device will confirm when pairing is complete. The LED indicator glows in green.
- If after 60 seconds the pairing process fails, please repeat steps 1 through 5 as described above.
- When not in use, turn off the headphones with your phone once, as it will pair again automatically.
- The automatic re-pairing feature will allow the headphones to be reconnected after being switched back on or when placed again within wireless range.
Call management using your wireless headphones
- When there is an incoming call press the phone button to pick it up. You may also press the answer button on your smartphone to receive the incoming call.
- To end a call, simply press the phone button once again.
- To reject a call, press and hold the phone button for about 2 seconds.
- Press the phone button twice to redial the last number called.
Music playback
- Press the play button to start and stop audio playback.
- Briefly press the previous track/volume – and next track/volume + buttons to go to the previous or next track.
- Press and hold the volume – or the volume + buttons to decrease or increase the volume level on the headphones.
- When listening to music using your smartphone, playback will pause to allow the call to go through.
- As soon as you hang up, music playback will resume automatically.
FCC statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Xtech® is a registered trademark. All rights reserved. The Bluetooth® word
mark is a registered trademark owned by Bluetooth SIG, Inc. Other trademarks
and trade names are those of their respective owners. Any mention of such is
only intended for identification purposes and is not to be construed as a
claim to any rights pertaining to, sponsorship by, or affiliation with, those
brands.
www.xtechamericas.com