IKEA VILTO Towel Stand Instruction Manual
- June 12, 2024
- Ikea
Table of Contents
IKEA VILTO Towel Stand
Product Information
The product is called VILTO. It is a piece of furniture that comes with a wall attachment device(s) to prevent tip-over accidents. The product does not include screws and plugs for the wall, so users need to use suitable screws and plugs for their walls. If unsure, it is recommended to seek professional advice.
Product Usage Instructions
- Ensure that the wall attachment device(s) provided with the product are securely attached to the wall.
- Choose suitable screws and plugs for your walls. If unsure, consult a professional for advice.
- Position the VILTO furniture against the wall, aligning it with the wall attachment device(s).
- Using the chosen screws, attach the VILTO furniture to the wall by inserting the screws through the designated holes in the wall attachment device(s) and into the wall.
- Tighten the screws securely, ensuring that the VILTO furniture is firmly attached to the wall.
- Double-check the stability of the furniture by gently pushing or pulling it. It should not tip over or wobble.
- Regularly inspect and maintain the wall attachment device(s) and screws to ensure their continued effectiveness.
It is important to carefully read and follow each step of the instructions to ensure proper installation and prevent accidents.
WARNING!
Serious or fatal crushing injuries can occur from furniture tip over. To
prevent tip over this furniture must be used with the wall attachment
device(s) provided.
Screw(s) and plug(s) for the wall are not included.
Use screw(s) and plug(s) suitable for your walls. If you are uncertain, seek
professional advice. Read and follow each step of the instruction carefully.
TOOLS
INSTRUCTION
© Inter IKEA Systems B.V. 2017 2022-04-29 AA-2012110-6