metabo SRE 4350 TurboTec Random Orbital Sander Instruction Manual

metabo SRE 4350 TurboTec Random Orbital Sander

Product Information:

• Product Name: SRE 4350 TurboTec / SRE 4351
• TurboTec Product Type: Orbital Sanders
• Brand: Metabo
• Country of Origin: Germany
• Serial Numbers: SRE 4350 – 33916098 / SRE 4351 – 33916099
• Dimensions (mm): 92 x 184 / 112 x 230 Weight (kg): 2.2 / 2.7
• Power Input (W): 350
• No-load Speed (rpm): 4200-9200
• Orbital  (opm): 11000 / 8500
• Sanding Pad Diameter (mm): 28
• Compliance: EU Directives 2) and Standards 3) – 2014/30/EU, 2006/42/EC, 2011/65/EU, EN 62841:2015, EN 62841-2-4:2014, EN IEC 63000:2018

Product Usage Instructions:

• Declaration of Conformity:
• The orbital sanders comply with all relevant requirements of the directives and standards.
• The technical file can be found on page 3. 2.

Specified Use

• The machine is suitable for dry sanding of flat and elliptical surfaces, wood, plastics, non-ferrous metals, sheet metal, and similar filled and painted surfaces.
• Improper use may cause damage for which the user bears sole responsibility.
• Observe accident prevention regulations and safety information provided.

General Safety Instructions:

• Pay attention to all parts of the text marked with the safety symbol.
• Follow guidelines for material, staff, application, and place of application (e.g. occupational health and safety regulations, disposal).
• Collect particles at the source to avoid deposits in the surrounding area.
• Use only suitable accessories to minimize uncontrolled particle release.
• Utilize a suitable extraction unit to reduce dust exposure.
• Avoid directing particles or exhaust air stream towards yourself or others.
• Use extraction units, air purifiers, and ensure good workplace ventilation.
• Keep the workplace clean using a vacuum cleaner instead of sweeping or blowing.
• Vacuum or wash protective clothing instead of blowing, beating, or brushing.

Overview:

• Read all safety warnings and instructions carefully.
• Failure to follow safety warnings and instructions may result in electric shock, fire, and serious injury.

Note: Please refer to the complete user manual for detailed instructions on assembly, operation, maintenance, and troubleshooting.

| SRE 4350 TurboTec
1) Serial Number 11350..| SRE 4351 TurboTec|
1) Serial Number: 11351..
---|---|---
A| mm (in)| 92 x 184 (3 5/8 x 7 1/4)| 112 x 230 (4 3/8 x 9)
P 1| W| 350| 350
P 2| W| 180| 180
n 0| min-1 (rpm)| 4200-9200| 4200-9200
n 0, TB| min-1 (rpm)| 11000| 11000
n 1, TB| min-1 (rpm)| 8500| 8500
s 0| min-1 (opm)| 8400-18400| 8400-18400
s 0, TB| min-1 (opm)| 22000| 22000
s 1, TB| min-1 (opm)| 17000| 17000
S| mm (in)| 2,2 (3/32)| 2,2 (3/32)
m| kg (lbs)| 2,5 (5.5)| 2,7 (6.0)
a h/Kh| m/s2| 3,3 / 1,5| 3,3 / 1,5
L pA /K pA| dB(A)| 79 / 3| 79 / 3
L WA /K WA| dB(A)| 90 / 3| 90 / 3

2) 2014/30/EU, 2006/42/EC, 2011/65/EU
3) EN 62841:2015, EN 62841-2-4:2014, EN IEC 63000:2018
2021-09-14, Bernd Fleischmann
Direktor Produktentstehung & Qualität (Vice President Product Engineering & Quality)
*4) Metabowerke GmbH – Metabo-Allee 1 – 72622 Nuertingen, Germany

Declaration of Conformity

We declare under our sole responsibility: These orbital sanders, identified by type and serial number 1), comply with all relevant requirements of the directives 2) and standards 3). Technical file at 4) – see page 3.

For UK only:
We as manufacturer and authorized person to compile the technical file, see 4) on page 3, hereby declare under sole responsibility that these random orbital sanders, identified by type and serial number 1) on page 3, fulfill all relevant provisions of following UK Regulations S.I. 2016/1091, S.I. 2008/ 1597, S.I. 2012/3032 and Designated Standards EN 62841:2015, EN 62841-2-4:2014, EN IEC 63000:2018.

Specified Use

The machine is suitable for dry sanding of flat and elliptical surfaces, wood, plastics, non-ferrous metals, sheet metal and similar filled and painted surfaces.
The user bears sole responsibility for any damage caused by improper use.
Generally accepted accident prevention regulations and the enclosed safety information must be observed.

General Safety Instructions

WARNING – Reading the operating instructions will reduce the risk of injury.
WARNING Read all safety warnings and instructions. Failure to follow all safety warnings and instructions may result in electric shock, fire and/or serious injury.
Keep all safety instructions and information for future reference.
Pass on your electrical tool only together with these documents.

Special Safety Instructions

Pull the plug out of the socket before making any adjustments, changing tools, carrying out maintenance or cleaning.
Secure the workpiece against slipping, e.g. with the help of clamping devices.
Wear ear protectors when working for long periods of time. High noise levels over a prolonged period of time may affect your hearing.
Hold the machine from the handles provided.

Reducing dust exposure:
Some of the dust created using this power tool may contain substances known to cause cancer, allergic reaction, respiratory disease, birth defects or other reproductive harm. Some examples of these substances are: lead (from lead- based paints), crystalline silica (from bricks cement, etc.), additives for wood treatment (chromate, wood preservative), some types of wood (like oak and beech dust), metals, asbestos.
The risk from exposure to such substances will depend on how long the user or nearby persons are being exposed.
Do not let particles enter the body.
To reduce exposure to these substances: work in a well ventilated area and wear protective equipment, such as dust masks that are specially designed to filter out microscopic particles.
Observe the relevant guidelines for your material, staff, application and place of application (e.g. occupational health and safety regulations, disposal).
Collect the generated particles at the source, avoid deposits in the surrounding area.
Use only suitable accessories. In this way, fewer particles enter the environment in an uncontrolled manner.
Use a suitable extraction unit.
Reduce dust exposure with the following measures:

• Do not direct the escaping particles and the exhaust air stream at yourself or nearby persons or on dust deposits.
• Use an extraction unit and/or air purifiers.
• Ensure good ventilation of the workplace and keep it clean using a vacuum cleaner. Sweeping or blowing stirs up dust.

Vacuum or wash protective clothing. Do not blow, beat or brush.

Overview

1. Additional handle (removable)
2. Setting wheel for selecting oscillating frequency
3. TurboBoost switch
4. Lock button for continuous activation
5. Trigger
6. Handle
7. Ejection nozzle
8. Dust bag
9. Closure band
10. Sanding sheet
11. 2 clamping elements
12. Sanding plate

• depending on equipment/not in scope of delivery

Initial Operation

Before plugging in the device, check to see that the rated mains voltage and mains frequency, as specified on the rating label, match your power supply.
Always install an RCD with a maximum trip current of 30 mA upstream.

Additional handle (removable)
If necessary, you can unscrew the additional handle (1) (right-hand thread).

Installation of sanding sheet
Sanding sheet with velcro-type fastening Simple attachment and removal thanks to the velcro-type fastening. Simply press on the sanding sheet such that the holes in the sanding sheet (10) and sanding plate (12) are aligned.
Sanding sheet without velcro-type fastening Secure the sanding sheet using a clamping element (11). Pull the disc across the sanding plate (12) so it is taut; then fasten in place with the other clamping element

Use

On/Off switch, continuous activation
To start the machine, press the trigger (5).
For continuous operation the trigger can be locked with the lock button (4). To stop the machine, press the trigger (5) again.

Setting oscillating frequency
When the TurboBoost switch (3) is switched off, the oscillating speed can be set at the setting wheel (2). This is also possible during operation.
Recommended oscillating frequency settings:

• Plastic materials . . . . . . . . . . . . . . . . . . . . . . . . 1-2
• Metal, Plexiglas®, old coats of paint . . . . . . . . 3-4
• Coarse and fine sanding, wood . . . . . . . . . . . 5

The best way to determine the ideal setting is through a practical trial.

TurboBoost switch
Actuate the TurboBoost switch (3) during operation to switch on additional power reserves for maximum material removal rate.

Dust extraction
To optimize the dust extraction performance, fit the sanding sheet such that the holes on the sanding sheet (10) and sanding plate (12) are aligned.

Note: We recommend connecting a suitable extraction device when sanding abrasive material (e.g. plaster, etc.).

Own extraction units:
Fit dust bag (8) to the ejection nozzle (7). Pull the dust bag (8) backwards to remove it.
Empty the dust bag (8) in good time to optimize dust extraction.

Third-party extraction units:
Connect a suitable extraction device to the ejection nozzle (7).

Cleaning, Maintenance

• Remove fixing screws (on lower side of sanding plate).
• Take off sanding plate.
• Sanding plate (as a spare part), see page 2.
• Mount sanding plate.
• Re-insert the fixing screws on the lower side of the sanding plate (the screw must be inserted in the existing thread pitch) and tighten (tightening torque = 3.5 Nm +/- 0.2 Nm).

Accessories

Use only genuine Metabo accessories.
Note: Metabo accessories are adapted to suit the machine’s velcro-type fastening. This increases the service life of the velcro-type fastening.
Use only accessories which fulfil the requirements and specifications listed in these operating instructions.
See www.metabo.com or the catalogue for a complete range of accessories.

Repairs

Repairs to electrical tools must be carried out by qualified electricians ONLY!
A defective mains cable must only be replaced with a special, original mains cable from metabo, which is available only from the Metabo service.
If the mains connection cable of this machine is damaged, it must be replaced by the manufacturer or an authorized service centre to avoid hazard.
If you have Metabo electrical tools that require repairs, please contact your Metabo service centre. For addresses see www.metabo.com.
You can download spare parts lists from www.metabo.com.

Environmental Protection

Observe national regulations on environmentally compatible disposal and on the recycling of disused machines, packaging and accessories.
Packaging materials must be disposed of according to their labelling in accordance with municipal guidelines. Further information can be found at www.metabo.com in the “Service” section.
Only for EU countries: Never dispose of power tools in your household waste! In accordance with European Guideline 2012/19/EU on used electronic and electric equipment and its implementation in national legal systems, used power tools  must be collected separately and handed in for environmentally compatible recycling.

Technical Specifications

Explanatory notes on the specifications on page 3.
Changes due to technological progress reserved.

• A = Dimensions of sanding plate
• P1 = Nominal power input
• P2 = Power output
• n0 = Idle speed (setting wheel)
• n0, TB = Idle speed (TurboBoost switch)
• n1, TB = Speed at rated load (TurboBoost switch)
• s0 = Oscillating frequency at idle speed (setting wheel)
• s0, TB = Oscillating frequency at idle speed (TurboBoost switch)
• s1, TB = Oscillating frequency at rated load (TurboBoost switch)
• S = Oscillating circuit diameter
• m =Weight without mains cable

Measured values determined in conformity with EN 62841.
Machine in protection class II
~Alternating current
The technical specifications quoted are subject to tolerances (in compliance with the relevant valid standards).
Emission values
Using these values, you can estimate the emissions from this power tool and compare these with the values emitted by other power tools. The actual values may be higher or lower, depending on the particular application and the condition of the tool or power tool. In estimating the values, you should also include work breaks and periods of low use. Based on the estimated emission values, specify protective measures for the user – for example, any organizational steps that must be put in place.
Vibration total value (vector sum of three directions) determined in accordance with EN 62841:
ah = Vibration emission value (surface grinding) Kh = Uncertainty (vibration)
Typical A-effective perceived sound levels:
LpA = Sound pressure level
LWA = Acoustic power level
KpA, KWA= Uncertainty
Wear ear protectors!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>