Nalloy H8J8DL Entry and Exit Gate Instructions

: June 12, 2024
: Nalloy

Table of Contents

H8J8DL Entry and Exit Gate
Product Information
Safety Information
United States

H8J8DL Entry and Exit Gate

Product Information

Product Model: H8J8DL

Manufacturer: Nalloy LLC

Product Type: User Information

Safety Information

Read all Safety Instructions before installation.
Failure to follow these safety instructions could result in
fire, electric shock, or other injury or damage.
Use the power supply provided with the device or an approved
power supply that complies with IEC 62368-1.
The device is for indoor use only.
Plug the power supply directly into a power outlet.
Do not use the power supply if it is broken, damaged, or prongs
are damaged.
Do not use the power supply in wet or damp locations.
Do not use the power supply if the power cable is broken,
damaged, or fried.
The device contains a non-serviceable Li-metal coin cell.
Changes or modifications not expressly approved by Nalloy LLC
could void the user’s authority to operate the equipment.

United States

Responsible party (contact for FCC matters only):

Nalloy LLC

859 Willard Street, Suite 400

Quincy, Massachusetts 02169

Product Usage Instructions

Read all safety instructions in the user manual before using
the product.
Ensure that the power supply provided with the device or an
approved power supply that complies with IEC 62368-1 is used.
The device is designed for indoor use only. Do not use it
outdoors.
Plug the power supply directly into a power outlet. Do not use
extension cords or power strips.
Inspect the power supply before use. Do not use it if it is
broken, damaged, or if the prongs are damaged.
Avoid using the power supply in wet or damp locations to
prevent electric shock or damage to the device.
Check the power cable for any signs of damage or fraying. If
the cable is broken, damaged, or fried, do not use the power
supply.
The device contains a non-serviceable Li-metal coin cell. Do
not attempt to replace or service the coin cell.
Any changes or modifications made to the device that are not
expressly approved by Nalloy LLC may void the user’s authority to
operate the equipment.

H8J8DL – User Information
Safety Information
Read all Safety Instructions before installation.
FAILURE TO FOLLOW THESE SAFETY INSTRUCTIONS COULD RESULT IN FIRE, ELECTRIC SHOCK, OR OTHER INJURY, OR DAMAGE.
Use the power supply provided with the device or an approved power supply that complies with IEC 62368-1.
The device is for indoor use only.
Plug the power supply directly into a power outlet.
Do not use the power supply if it is broken, damaged or prongs are damaged.
Do not use the power supply in wet or damp locations.
Do not use the power supply if the power cable is broken, damaged or fried.
The device contains Li-metal coin cell that is not serviceable.
Changes or modifications not expressly approved by Nalloy LLC could void the user’s authority to operate the equipment
United States
Responsible party (contact for FCC matters only): Nalloy LLC, 859 Willard Street, Suite 400, Quincy, Massachusetts 02169
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: –Reorient or relocate the receiving antenna. –Increase the separation between the equipment and receiver. –Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. –Consult the dealer or an experienced radio/TV technician for help. To meet RF exposure requirements, this device needs to be placed at least 20 cm away from the body of the user as well as other radio antennas. FCCID: 2AVOB-H8J8DL