EcoBurner Ltd 1202 MINI EcoBoost Instructions
- June 12, 2024
- EcoBurner Ltd
Table of Contents
Ltd 1202 MINI EcoBoost
Instructions
1202 MINI EcoBoost
The EcoBoost MINI is used as an accessory to the EcoBurner unit to improve
efficiency.
Some assembly is required – The Spring Clip is attached to the bracket as
illustrated below.
The EcoBoost MINI attaches to the Reflector Plate of the EcoBurner unit. The
EcoBurner can then be used under chafing dishes as normal.
The shape of the bracket reduces reflected heat, keeping the fuel vessel cool
which helps to improve efficiency.
Stage 1 Attaching the Spring Clip to the EcoBoost MINI
Align the Spring Clip with the EcoBoost MINI as shown.| Slide the closed end of the Spring Clip into the bracket central opening.| Squeeze the protruding open ends of the Spring Clip together and push these down into the central opening.| Ensure all four legs of the Spring Clip are held within the slots as shown.
Stage 3 Using the EcoBoost MINI with the EcoBurner
Attaching the disc to the EcoBurner:
EcoBoost MINI with Spring Clip attached.| Align the bracket with the EcoBurner
and push firmly, level and parallel to the base, forcing the spring arms apart.
The EcoBurner reflector plate should sit on the Spring Clip arms and
be held firmly in position.| Slide the EcoBurner out from the Spring Clip,
level and parallel to the base.
Once the bracket has been attached to the EcoBurner, light using a stick
lighter as normal and place under a chafing dish.
Allow sufficient time for the EcoBurner to cool down after use before handling.
The EcoBoost MINI should be removed after use as illustrated in step 4 to
allow the EcoBurner to be refilled according to usual instructions.
After refilling the EcoBurner, The EcoBoost MINI can then be re-attached for
next use.
Care Instructions
Cleaning the EcoBoost MINI
- Wipe the EcoBoost MINI using a damp cloth.
- The EcoBoost MINI can withstand typical dishwasher cycles.
Warnings & Troubleshooting
After use, the EcoBoost MINI will be VERY HOT and should be allowed to
cool for 30 minutes before removal.
The chafing dish should never be used without ensuring there is water in the
water pan. This will permenantly damage the base of the chafing pan.
The EcoBoost MINI Spring Clip is removable and replaceable for future upgrades
to the EcoBurner system. Replacement Spring Clips can be supplied by your
local EcoBurner distributor.
Manufacturer:
EcoBurner Ltd., Unit 5 Airside, Gulf
Stream Avenue, Airport Business Park,
Waterford, X91 RF20, Ireland
Model: EcoBoost MINI
Part number: 1202
Revision: 2
www.ecoburner.com