Choose2Rent Cudy AC1200 4G/LTE Router User Guide
- June 12, 2024
- Choose2Rent
Table of Contents
Choose2Rent Cudy AC1200 4G/LTE Router
Shipment Content:
- 1 x Protective Case
- 1 x 4G LTE Router
- 1 x Power Adapter
Quick Setup
-
Plug in the Power cable and the router will turn On. Allow 2-5 minute for the Center LED to light up solid blue when connected to 4G
(pictured below). If the LED lights up solid purple, it is connected to 3G.
Do Not Touch the SIM Card or Reset button.
-
Plug in a DHCP hard line from the venue into the router’s LAN4/WAN port. Skip this step if using Mobile Internet from the provided SIM Card.
-
Place all 4 antennas in an upward position.
-
Connect your wired devices. (e.g., Ethernet enabled Printer) Plug in the Ethernet Cable (RJ45) to the back of the router into any of the LAN ports, 1- 3. Plug the other end of the cable into a printer or PC. This device allows you to connect to 3 wired devices via Ethernet.
-
Connect your wireless devices (e.g. Tablet / PC) Search with your device for the SSID (Wireless Network Name) on the bottom of the router along with the password in your Important Documents Folder to connect wirelessly.
Troubleshooting
What if…
…the router does not power up?| Please make sure the power cable is properly
installed on both ends.
---|---
…I want to change to a hardline DHCP connection?| Please make sure to plug in
the venue’s DHCP hard
line into LAN4/WAN.
…I want to change to 4G LTE instead of DHCP?| Please unplug the DHCP hardline from port WAN/LAN4 and allow the router 2-5 to establish a
connection to cellular data.
…my connected device (e.g. printer, PC) is not getting an IP address?| No devices should be connected to Port 4 and please verify the connection on both ends.
Verify the status light is blue or purple. If problem
persists power cycle both units.
…the status light is Blinking Red?| The Router is starting up, please give it
some time to connect.
…the router light is Solid Red?| The router is not connecting to Cellular;
-Please make sure you waited 2-5 minutes at least for a connection to be made.
-Confirm the SIM card is properly installed.
-Try relocating the router closer to the outside for better reception.
Contact our Support Team:
www.choose2rent.com/help
+1 800-622-6484 Ext. 3 (USA)
+49 40 226 360 – 590 (Europe)
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>