Mafell 202069 Universal Guide Support User Manual
- June 12, 2024
- mafell
Table of Contents
202069 Universal Guide Support
User Manual
Product information
In respect of accessory “universal guide” with item No. 202069
1.1 Manufacturer´s data
MAFELL AG, Beffendorfer Straße 4, D-78727 Oberndorf / Neckar,
Phone +49 (0)7423/812-0,
Fax +49 (0)7423/812-218,
e-mail: mafell@mafell.de
Use according to intended purpose / operation
The
universal guide 1 (shift rail) can be used with all MAFELL machines that are
equipped with a parallel guide fence as 2 (see illustration).
The angle fence 3 can be set to the desired value with the scale (at the
reverse side of the universal guide) and fastened with the wing screw 4.
The universal guide 1 is placed against the workpiece with the angle fence 3
and the guide rail 5 is held in place on the workpiece manually. The MAFELL
machine is introduced into the guide rail 4 with the parallel guide fence 2
and shifted across the workpiece. The universal guide 1 is secured with rubber
strips against slipping and can in addition be fastened on the workpiece
through the holes 5.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>