SelectBlinds Cassette Precision Solar Shades Instruction Manual

SelectBlinds Cassette Precision Solar Shades

Product Information:

The product is a window covering system designed for indoor use only. It comes with different installation options, including cassette, standard brackets, and fascia. The product is easy to assemble and can be installed by non- professionals. It is important to note that the product comes with safety warnings regarding the risk of strangulation and entanglement, especially for young children. The cords, chains, and tapes used to operate the window coverings can pose a danger if not handled properly. To ensure safety, cords should be kept out of the reach of young children, and beds, cots, and furniture should be moved away from window covering cords. Cords should not be tied together, and precautions should be taken to prevent cords from twisting and forming loops.

Cassette Installation Instructions:

1. Read the instructions carefully before starting the assembly process.
2. Ensure the product is intended for indoor use only.
3. For safety purposes, make sure cords are kept out of the reach of young children.
4. Place the product on the chain side and mount it on the wall using the provided brackets.
5. Follow the child safety device installation instructions specified in the childsafe manual.
6. To remove the product, follow the indicated steps in the manual.

Standard Brackets Installation Instructions:

1. Read the instructions carefully before starting the assembly process.
2. Ensure the product is intended for indoor use only.
3. For safety purposes, make sure cords are kept out of the reach of young children.
4. Mount the product using the standard brackets according to the provided instructions.
5. Follow the child safety device installation instructions specified in the childsafe manual.
6. To remove the product, follow the indicated steps in the manual.

Fascia Installation Instructions:

1. Read the instructions carefully before starting the assembly process.
2. Ensure the product is intended for indoor use only.
3. For safety purposes, make sure cords are kept out of the reach of young children.
4. Mount the product using the fascia brackets according to the provided instructions.
5. Follow the child safety device installation instructions specified in the childsafe manual.
6. To remove the product, follow the indicated steps in the manual.

Installation Instructions – Cassette

Read the instructions carefully before assembling and using the product. Assembling process can be completed by non-professionals.
For indoor use only

WARNING

• Young children can strangle in the loop of pull cords, chains and tapes, and cords that operate window coverings.
• To avoid strangulation and entanglement, keep cords out of the reach of young children. Cords may become wrapped around a child’s neck
• Move beds, cots and furniture away from window covering cords.
• Do not tie cords together. Make sure cords do not twist together and form a loop.

PRODUCT OVERVIEW

SETTING

DIMENSIONS

Mounting Instructions

WARNING

Install the child safety device as specified in the childsafe manual.

Removal

INSTALLATION INSTRUCTIONS – STANDARD BRACKETS

Read the instructions carefully before assembling and using the product.
Assembling process can be completed by non-professionals. For indoor use only.

WARNING

• Young children can strangle in the loop of pull cords, chains and tapes, and cords that operate window coverings.
• To avoid strangulation and entanglement, keep cords out of the reach of young children. Cords may become wrapped around a child’s neck
• Move beds, cots and furniture away from window covering cords.
• Do not tie cords together. Make sure cords do not twist together and form a loop.

instructions

WARNING

Install the child safety device as specified in the childsafe manual.

Removal

WARNING

The Safety Device is a fixed tension device for operating ball-chains that form a continuous loop. This device must be applied in chain loops that do not have a breakaway design. The safety device prevents free-hanging loops in operating chains. Install the safety device at the maximum distance possible from the control mechanism to prevent slack in the loop. Upon delivery to the end user, the device must be attached to the chain. The tensioning device is provided with fasteners for installation to wooden wall substrates. Please read the following information when installing the tensioning device. For other wall types please use appropriate screws that are suitable for your wall.

• A: Inside Mount: Fully recessed shade and safety device
• B: Inside Mount: Partially recessed shade and safety device
• C: Outside Mount: Shade and safety device outside window

INSTALLATION TIPS

Installation – Fascia
Read the instructions carefully before assembling and using the product.
Assembling process can be completed by non-professionals. For indoor use only

WARNING

• Young children can strangle in the loop of pull cords, chains and tapes, and cords that operate window coverings.
• To avoid strangulation and entanglement, keep cords out of the reach of young children. Cords may become wrapped around a child’s neck
• Move beds, cots and furniture away from window covering cords.
• Do not tie cords together. Make sure cords do not twist together and form a loop

Step One:

• Use the brackets to mark the screw locations
• On outside mount, make your marks so the distance from the outside edge of the bracket to the outside edge of the other bracket equals your ordered width

Note: Brackets must be level to each other for the shade to operate properly (for both inside mount and outside mount)

Step Two:

• Recommend you pre-drill the screw holes using a 5/64″ drill bit where you marked the screw locations
• Mount the brackets using 2 screws for each bracket
  Note: On outside mount, the screws will be installed on an angle. This is normal and the screws may not be flat against the bracket.

Installation

CORNICE INSTALLATION
INSIDE MOUNT
NOTE:
Your cornice will have pre-drilled holes.
The brackets for your shade will come installed on the cornice (if the cornice and shade are ordered together).
Install cornice before installing the shade.

1. Hold the cornice to the top of your window frame and set it back until it is flush with your wall or until it is touching the back of the window opening. Be sure the cornice is centered in the opening.
2. Pre-drill holes for your screws through each pre-drilled hole in your cornice.
3. Secure your cornice to the window by screwing through each pre-drilled hole.
4. Once the cornice is mounted, you can then install the shade.

CORNICE INSTALLATION
OUTSIDE MOUNT
NOTE:
The brackets for your shade will come installed on the cornice (if the cornice and shade are ordered together).
Install cornice before installing the shade.

1. Make sure the surface you intend to install your cornice hardware is sturdy enough to support the brackets. You will need to screw into wood studs that are strong enough to securely bond with the included screws or you will need to use fasteners to securely support the brackets. Please note secure fasteners are not included.
2. Center the cornice over the window opening at your desired height. Mark the position of the ends of the cornice on the wall. Measure in 6″ from each end and using the cornice bracket mark the screw holes with a pencil. If you have additional cornice brackets, space them evenly between the outer brackets. Make sure all the mounting brackets are level with one another.
3. Pre-drill the holes for each cornice bracket and then secure the brackets to your mounting surface.
4. Place the cornice on top of the brackets and center it to the window. Check again that the corniceis level. Hold the cornice in place and screw through the top of each bracket into the cornice.
5.  Once the cornice is secured to each bracket, then you can install the shade.

References

• YouTube

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>