RGBlink TAO 1pro Broadcasting Streaming Decoder User Guide
- June 12, 2024
- RGBlink
Table of Contents
TAO 1pro
Quick Start
- 5.5 inch HD touch screen for operation
- Network HD streaming,H.264 encoding
- Asynchronous rotation of main screen and HDMI output
- 2UVC inputs,2HDMI 1.3 input and 1* HDMI 2.0 output
- Bluetooth 5.0
- NDI 5.0 encoder
- Monitor with waveform, vector and histogram analyse
- Network HD streaming,H.264 encoding
- Recorder to USB 2.0 SSD hard disk, range up to 2TB
- Multistream up to 4 Live Streaming platform simultaneously
- Optional external battery up to two batteries
Overview
TAO 1pro is a Broadcasting streaming decoder with a 5.5 inch FHD preview
display, but also a 4 channels seamless video switcher for 2 USB 3.0 and 2
HDMI 1.3 inputs, and supports streaming directly by Ethernet output which is
ready to connect to external cloud based router and streaming from Anywhere to
Everywhere.
TAO 1pro is compatible with standard USB 2.0 and USB 3.0 cameras by UVC
protocol, and brings itself as a much affordable and user friendly streaming
tools for anybody, the talents who is willing to be Anchor Online.
TAO 1pro is also with touch panel for finger configuration, and with optional
2 chargeable battery extending its capacity for outdoor application.
TAO 1pro can be divided into four parts: Input/Output Area, Scroll Area,
Reminder Area and Status Display Area.
Hardware Orientation
Front Panel
| No. | Item | Description |
|---|---|---|
| 1 | Power Button | Gently press to turn on, long press 3 seconds to turn off |
| 2 | Touch Screen | 5.5 inch touch screen for menu control |
Interface Panel
| No. | Connectors | Number | Description |
|---|---|---|---|
| 1 | HDMI IN | 2xHDMI IN | Connect to camera and computer |
| 2 | HDMI OUT | 1xHDMI OUT | Connect to external monitor |
| 3 | Type C | 1xPD Type C | Connect to the power supply |
| 4 | Audio | lx MIC IN/LINE OUT | Connect to microphone and earphone |
| 5 | LAN | lx RJ45 | Gigabit network port |
| 6 | USB 2.0 | lx USB Type A | Connect to harddisk for recording,and storage up to |
2T
7| USB 3.0| 2x USB Type A| Connect to USB camera for UVC capture
Product Installation
-
Power on TAO 1pro via USB-C power cord.
-
Connect the input source to TAO 1pro HDMI IN connector.
-
Connect monitor to HDMI OUT interface to preview the input and output.
-
Connect microphone to Audio IN interface, speaker or earphones to Audio OUT interface.
-
Connect TAO 1pro to the router via CAT6 and stream to the live platform.
-
After connection, press the power switch on the top panel to open the device.
Use Your Product
Signal Switch
- Gently touch【HDMI 1】in the bottom menu bar.
- Select the signal you want to choose/switch.
1. Source Status:
–No Source;
–Ready;
–Selected.
2. Only by switching to the UVC signal can the control be achieved. Grey status of UVC signal indicates unavailable status.
Streaming
Following steps take YouTube stream as example:
-
Make sure TAO 1pro connect to the network.
-
Open YouTube Studio on your computer,select【Go Live】–【Stream】,Copy Stream URL and Stream Key.
-
Create a new TXT file first,and paste the Streaming URL and Stream Key (the format must be : rtmp//:YOUR STREAM URL/YOUR STREAM KEY), and save the TXT file to USB as rtmp.ini.(Newline is required to add multiple streaming addresses) and connect the USB disk to TAO 1pro’s RECORD USB port.
-
Click [Stream Output] icon to enter the following interface.
-
Click [Confirm] to enter the [Stream Output Config] interface.
-
Click [ON AIR] to stream ( support up to 4 live streaming platforms at the same time).
Source Status: –Available but Failed in Streaming; –Streaming.
Player
- Insert a USB flash drive into the USB 2.0 port and then play the video in the USB.
- Press the icon to enter the [Player] interface and select the video you want to play.
Note: If there is no USB flash drive inserted, the icon displays gray status.
NDI Decoder
- Set the IP address (same as the network of camera ), subnet mask and gateway in [Network Settings] of [Scroll Area].
- Press the icon to turn on the switch to start NDI decoding function.
NDI Encoder
Press the NDI decoding icon to enter the interface to set relative
parameters.
Recorder
- Plug USB hard drive to TAO 1pro USB 2.0 port.
- Click record icon to start recording.
Note: If there is no USB
flash drive inserted, the recording icon displays gray status.
Settings
Click [Setting] in Scroll Area to enter following interface to set Input
Settings, Network, Bluetooth, UVC Control, Fan Control, Stream Output, NDI
Decoder, NDI Encoder, Display and About.
Input Settings: Input Signal, Input Format, Audio Sampling Rate, Signal
Name, Brightness, Contrast, Saturation, Hue and Sharpness.
Network: Set IP Address, Netmask and Gateway.
Bluetooth: ON/OFF. Turn ON Bluetooth and choose the device to be connected to
achieve control of PTZ camera.
UVC Control: Adjust parameters of PTZ cameras connected to TAO 1pro.
Fan Control: Set fan speed and fan mode.
Stream Output: Set display mode, resolution ,frame rate, bitrate.
NDI Decoder/Encoder: Same settings as previous parts shown.
Display: Set the brightness of the output, HDMI output resolution and display
rotation.
About: Include device info, language setting, update setting and factory
reset.
Brightness/RGB Waveform/Vector/Histogram
Click Brightness/RGB Waveform/Vector/Histogram to select position and
transparency.
Audio Meter
Click Audio Meter to adjust settings of input and output audio.
Viewfinder
Specification
Connectors| Input| HDMI 1.3 2xHDMI-A
USB 3.0 2xUSB-A
---|---|---
Output| HDMI 2.0 1xHDMI-A
Record| USB 2.0 1xUSB-A
Audio| In 1×3.5mm Audio Jack
Out 1×3.5mm Audio Jack
Communication/ Stream| LAN 1xR.145
Power| 1xUSB-C
Performance
Screen Feature| Input Resolutions| HDMI
SMPTE
720p@50/60 11080p@23/24/60
VESA
1024×768@60 I 1280×720@60 I 1280×800@60 I 1280×1024@60 1360×768@60 I
1600×1200@60 I 1680×1050@60 11920×1080@60
Output Resolutions| HDMI
SMPTE
720p@50/60 11080p@24/25/50/60 12160p@60
VESA
1024×768@60 I 1280×720@50/60 I 1280×800@60 I 1280×1024@60
1360×768@60 11920×1080@50/60 I 3840×2160@60
Supported Standard| HDMI 1.3(Input) 12.0(Output)
USB 3.0
Screen Dimension| 5.5 “TFT
Resolution| 1080×1920 pixels
Dot Pitch| 0.063(1-)x0.021(W)(mm)
Aspect Ratio| 16:09
Brightness| 450cd/m2
Contrast| 1000:1
Backlight| LED
View Angle| 80°/80°(L/R)80°/80°(U/D)
Power| Input Voltage| 9V/2A
---|---|---
Max Power| 18W
Environment| Temperature| 0°C-55°C
Humidity| 5%-85%
Physical| Weight| Net 350g(without battery);882g(with battery)
Package 770g
Dimension| Net 161mmx106mmx36mm
Package 255mmx145mmx85mm
Contact Information
Warranty:
All video products are designed and tested to the highest quality standard and
backed by full 1 year parts and labor warranty. Warranties are effective upon
delivery date to customer and are non-transferable.
GBlink warranties are only valid to the original purchase/owner. Warranty
related repairs include parts and labor, but do not include faults resulting
from user negligence, special modification, lighting strikes,
abuse(drop/crush), and/or other unusual damages.
The customer shall pay shipping charges when unit is returned for repair.
Headquarter: Room 601A, No. 37-3 Banshang community, Building 3, Xinke Plaza,
Torch Hi-Tech Industrial Development Zone, Xiamen, China
-
Tel: +86-592-5771197
-
Fax: +86-592-5788216
-
Customer Hotline: 4008-592-315
-
E-mail: support@rgblink.com
© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 592 5771197 | support@rgblink.com |
www.rgblink.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>