Iolieo M20 518W Projector User Manual

Iolieo M20 518W Projector

WHAT’S IN THE BOX

NOTICE

PRODUCT OVERVIEW

QUICK START

1. Projector Installation
   Note: Whichever installation option you select, please make sure:

   • the projector is centered directly in front of the wall/screen, but not tilted or placed at an angle toward the wall/screen;
   • to go to Settings > Projection Setting > Projection Mode to select the corresponding projection mode so the images can be projected correctly.

2. Power On/Off

   • Plug the power cord into an outlet.
   • Take off the lens cover.
   • Press the Power Button to turn on the projector.
   • Press the Power Button twice to turn off the projector.

3. Images Adjustment

   • Rotate the Keystone Correction Ring to correct Vertical Keystone Distortion until the image is evenly rectangular
   • Rotate the Focus Ring to sharpen the Image Focus until the blurred image becomes clear.
   • Go to Homepage > Settings > Projection Setting > Image Scaling to enlarge or reduce the image size. (Optional)

PROJECTOR CONNECTION AND INPUT SOURCE

Connect your device to the projector correctly, then select the right input source on the homepage.

1. USB Connection

   • Photo Format Supported
     BMP/JPG/PNG/JPEG

   • Audio Format Supported
     MP3/WMA/MP2/AAC/FLAC/PCM

   • Video Format Supported
     AVI/MP4/MKV/FLV/MOV/RMVB/3GP/MPEG/H.264/XVID

HD Connection

This option is for connecting a device with an HDMI output port.

AV Connection

TROUBLESHOOTING GUIDE

1. The copyrighted contents from Hulu, Netflix, and similar services can not be mirrored or cast.
   • Due to the copyright restriction from Hulu, Netflix, and similar services, the contents MAY NOT be mirrored or cast.
2. What should I do if I want to watch the copyrighted contents from Hulu, Netflix, and similar services via the projector?
   • Please prepare a Fire TV stick, Roku stick or Chromecast™ (not included), then connect it to the projector to watch the contents.
3. Blurry image
   • Adjust the focus ring/keystone.
   • The projector and screen/wall must be in the effective distance.
4. Can I play a video with 4K resolution via a USB drive?
   • The 4K video contents can be presented by connecting the projector to a laptop or a TV stick, but it cannot be presented via a USB drive.
5. Remote unresponsive
   • Make sure the remote points at IR receiver directly.
   • Do not cover the IR receiver.
   • Replace the old AAA batteries with new ones.
6. Upside down images
   • Go to Homepage > Settings > Projection Setting > Projection Mode to flip the projection image.
7. Factory reset
   • Go to Homepage > Settings > System Setting > Restore Factory Default to restore the projector to default settings.

WIFI CONNECTION

Go to Homepage > Settings > Network Setting to connect the projector to your router’s WiFi

SCREEN MIRRORING

For iOS System
Screen Mirroring Wirelessly

• Step I: Connect the projector and your mobile device to the same router’s WiFi or directly connect your mobile device to the projector’s AP hotspot.
  Tip: When you are using the projector’s AP hotspot, the content will be mirrored via the cellular data.

• Step 2: Go to Homepage and select iOS Cast to enter the interface below.

• Step 3: Activate Screen Mirroring/AirPlaying Mirroring in the Control Center of your iOS device and search for the

• Step 4:

  • Select Projector-xxxx from the searching list. The contents on your iOS device will be mirrored on the projection
  • screen/wall after a successful connection.

BLUETOOTH CONNECTION

Use as A Bluetooth Speaker
You can connect your mobile device to this projector via a Bluetooth connection and use it as Bluetooth speaker.

Step 1:
Go to Homepage > Settings > BT Amplifier to make the projector ready for Bluetooth connection. Step 2:
Go to the Bluetooth setting of your mobile device to turn on the Bluetooth, then search for Projector-XXXX from the search list and pair the mobile device with the projector.

Tip: Press the back button to exit this mode.

Connect to An External Bluetooth Speaker

• Except for the wired 3.5mm audio output port connection, you can also connect a Bluetooth speaker or
• Bluetooth headphones to this projector via the Bluetooth connection.

Step 1:
Turn on your Bluetooth device and make it ready for a Bluetooth connection.

Step 2:
Go to Homepage Settings > System Setting > Bluetooth and press OK to enter the interface below.

Step 3:
Press the Right button to turn on the Bluetooth function of the projector, then select Search device and press OK to start searching for available Bluetooth devices.

Step 4:
Select your BT device and pair it with the projector.

IMPORTANT:
Compared with the wired connection to a speaker, BT wireless connection spends more time processing digital audio data, converting said data to an audio signal, and streaming the signal.
There may be a delay a or slight lag on audio due to signal interference.

As a result, the sound on the speaker may not be in sync with the image on the projector, especially
when you are using wireless screen mirroring with WiFi and BT wireless connection at the same time.
If you are experiencing this situation, please check the following options to improve audio quality:

• Instead of using wireless screen mirroring with WiFi and BT wireless connection at the same time, we recommend using wired screen mirroring and BT connection or using HD connection via the provided HD cable and BT connection simultaneously. If you still want to use wireless screen mirroring, it is recommended to output the audio via a wired speaker.
• Move vour BT device closer to the projector.
• Keep the projector and your BT device away from other BT devices to avoid interference.
• You may be able to adjust the latency (Lip Sync) on your device which is playing the video. The way to adjust the latency varies with different devices; please consult it from the device manufacturer. (2 Due to the compatibility issue between BT speakers/headphones and the projector, few BT devices may not be paired with the projector via BT wireless connection. Please contact us at [email protected] for further assistance.

SETTINGS

1. Press the Menu button on any interface to check the PICTURE, SOUND and OPTION settings.

Tips:

• After you select User in the option of Picture Mode, you can change the settings of the Contrast,
• Brightness, Color, Tint and Sharpness to adjust the image quality.
• If you select User in the option of SOUND, you could change the settings of the Treble and Bass to adjust the sound effect.
• When you are using the USB connection or HD connection on the projector, the option of Aspect Ratio will be activated. You can then adjust the aspect ratio of the projection image.

Go to Homepage > Settings to connect the projector to a WiFi network, change language, restore the projector to factory settings, change the projection mode and adjust the image size.

PROJECTION DISTANCE AND SIZE

• The recommended projection distance varies with different projection contents. Please adjust the distance between the wall/screen and the projector properly as needed.
• Ambient darkness will improve the clarity of the projected images.

SPECIFICATION

FCC Statement

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator& your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

ISEDC Warning

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired operation of the device.

Operation of this device in the band 5150-5250 MHz is restricted to indoor use only.Le fonctionnement de cet appareil dans la bande 5150-5250 MHz est limité à une utilisation en intérieur uniquement. 5GHz band(W52): Indoor use only

• 5GHz band(W52): Indoor use only

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>