VONTAR T95ZPLUS Smart TV Box User Manual
- June 4, 2024
- VONTAR
Table of Contents
Android TV
User Manual
Getting Started
1.1 Basic Operations
1.1.1 Power On/ Off and Sleep
- Connect the box to the TV with HD cable, conned the box to the power adaptor, and Conned the mouse. air mouse or other input devices with a USB port
- After the device and cable connections, the power lead turns blue. 3. After the device and cable are disconnected. Power LED turns off 4. Under power-on mode, press the remote control’s power button, and the device is entering into sleep mode.
- Under sleep mode, the device will wake when you press the remote control’s power button,
1.1.2 Open applications
Use the remote control’s arrow keys to choose the wanted program. Click the OK
button to open the selected program
1.1.3 Switch in the applications
Old( ‘My Apps’ to view recently used programs, click the program icon to
switch applications arbitrarily
1.1.4 Close Applications
Click the icon ‘ to view recently used programs, choose one of them by click
and hold, and drag it to a blank area to close the application
‘ This function only operated in the coalition of Mouse mode
1.1.5 Back To Home Screen
Click icon to return to the home screen
Click icon on the remote control to return to the home screen
1.1.6 Read External Storage Data
Read U Disk Insert U flash disk or removable hard disk into the USB port in
the status of power on, icon USB appears in the top left corner of the
desktop, open “FileBrowser”, the identified USB(A:) will appear under “Local
Disk”, U disk’s operation is available now
Read TF
card
Insert the TF card into the device in the status of power on, when the icon
appears in the top left corner of the desktop, open “FileBrowser”, and the
identified External Storage Card will appear under “Local Disk”, TF card’s
operation is available now
1.1.7 WIFI
Function
Home Screen 4 Settings -Network- Select “Wi-Fi” to open the WIFI function
Choose hotspot 4Input Password 4 Connect to the network
1.1.8
Ethernet Function
Home Screen 4 Settings -Network- Select “Ethernet” to open the Ethernet
function
Insert the network cable, the network will be connected automatically
1.1.9 WLAN
Hotspot
Operations on the box :
Home Screen -Settings 4 Other—) More Setting 4Portable hotspot 4 Select
“Portable Wi-Fi hotspot”
Select “Set
up Wi-Fi hotspot” to set up “Network SSID “.”Security”. and” Password”
parameters
Ensure
connected to the wired network, the box can be used as wireless AP to support
more wireless devices access in the family
2.1.1 The Step that how to reflash the box
- Uncompress the downloaded firmware(ROM) to the root of an SD/TF card(format your card first).
- Insert the SD Card into the powered-off Box (power cable not plugged in) with no external USB storage attached.
- Using a toothpick, insert it into the AV port of the Box, and press and hold the hidden button while plugging the power in. Do not release until you see the screen of Robert Logo.
- The update will run automatically. When it is done then choose “Reboot”. You can disregard any errors that display after the update, they are not relevant to your device.
- When the system has rebooted then you should first check to ensure the wifi is working by going to Settings->Wi-Fi. Turn on the wifi if it’s off and you should be able to connect.
Product Declare
Legal notice:
Special reminder that this product is only for overseas use, The content of
installed should comply with the relevant local laws and regulations, In case
of any violation of laws manufacturers promise:
The content of the manufacturer preinstalls, complies with local laws and
regulations, and does not involve illegal content.
FCC Caution:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:?(1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment s
should be installed and operated with a minimum distance between 20cm of the
radiant or your body: Use only the supplied antenna.
FCC ID:2AZCT-T95ZPLUS
Documents / Resources
|
VONTAR T95ZPLUS Smart TV
Box
[pdf] User Manual
T95ZPLUS, 2AZCT-T95ZPLUS, 2AZCTT95ZPLUS, T95ZPLUS Smart TV Box, Smart TV Box,
TV Box, Box
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>