JBL TUNE BUDS True Wireless Earbuds User Guide
- October 30, 2023
- JBL
Table of Contents
quick start guide
BC
TUNE BUDS
WHAT’S IN THE BOX
APP
JBL Headphones
GET EVEN MORE CONTROL AND PERSONALIZATION OF YOUR LISTENING EXPERIENCE WITH THIS FREE APP.
https://storage.lscloud.harman.com/Testing/MyJBLHeadphones/QRCodeDownload/appstore/jblheadphone.html
how to wear
First time use
power on & CONNECT
DUAL CONNECT + SYNC
MULTI-POINT CONNECTION
CONTROLS
- Enable advance controls by connecting your JBL Tune BUDS to JBL Headphones App .
** ENABLE YOUR VOICE ASSISTANT THROUGH JBL HEADPHONES APP AND ASSIGN IT TO YOUR PREFERRED EARBUD (L/R).
VOICEAWARE
power off
FACTORY RESET
DO MORE WITH THE APP
Charging
LED BEHAVIORS
TECH SPEC
| Model: | TUNE BUDS |
|---|---|
| Driver size: | 10 mm/ 0.39” Dynamic Driver |
| Power supply: | 5 V 1 A |
| Earbud: | 5.4 g per pc (10.8 g combined)/ 0.012 lbs per pc (0.024 lbs combined) |
| Charging case: | 42 g/ 0.093 lbs |
| Earbud battery type: | Lithium-ion Battery (70 mAh/ 3.85 V) |
| Charging case battery type: | Lithium-ion Battery (750 mAh/ 3.7 V) |
| Charging time: | 2 hrs from empty |
| Music playtime with BT on and ANC off: | Up to 12 hrs |
| Music playtime with BT on and ANC on: | Up to 10 hrs |
| Talk time with ANC on: | Up to 6 hrs |
| Talk time with ANC off: | Up to 6.6 hrs |
| Frequency response: | 20 Hz – 20 kHz |
| Impedance: | 32 ohm |
| Sensitivity: | 101 dB SPL@1 kHz |
| Maximum SPL: | 93 dB |
| Microphone sensitivity: | -38 dBV/Pa@1 kHz |
| Bluetooth version: | 5.3 |
| Bluetooth profile version: | A2DP V1.3.2, AVRCP V1.6.2, HFP V1.8 |
Bluetooth transmitter
frequency range:| 2.4 GHz – 2.4835 GHz
Bluetooth transmitter power:| <11 dBm (EIRP)
Bluetooth transmitter modulation:| GFSK, π/4-DQPSK, 8-DPSK
Maximum operation temperature:| 45 °C
TO PROLONG BATTERY LIFESPAN, FULLY CHARGE AT LEAST ONCE EVERY 3 MONTHS. BATTERY LIFE VARIES BY USE AND SETTINGS.
WARNING
DO NOT ATTEMPT TO OPEN, SERVICE, OR DISASSEMBLE THE BATTERY |
DO NOT SHORT CIRCUIT | MAY EXPLODE IF DISPOSED OF IN FIRE | RISK OF EXPLOSION
IF BATTERY IS REPLACED BY AN INCORRECT TYPE | DISPOSE OR RECYCLE USED
BATTERIES ACCORDING TO THE INSTRUCTIONS
IC RF Exposure Information and Statement
The SAR limit of Canada (C) is 1.6 W/kg averaged over one gram of tissue.
Device types: (IC: 6132A-JBLTUNEBUDS) has also been tested against this SAR
limit According to this standard, the highest SAR value reported during
product certification for head use is 1.067 W / kg.
The device was tested for typical bodily operations where the product was kept
0 mm from the head. To maintain compliance with IC RF exposure requirements,
use accessories that maintain a separation distance of 0mm between the user’s
head and the back of the headset. The use of belt clips, holsters and similar
accessories shall not contain metal parts in its assembly. Use of accessories
that do not meet these requirements may not comply with IC RF exposure
requirements and should be avoided.
Head operation
The device was subjected to a typical head manipulation test. In order to
comply with RF exposure requirements, a minimum separation distance of 0 cm
must be maintained between the user’s ear and the product (including the
antenna). Head exposure that do not meet these requirements may not meet RF
exposure requirements and should be avoided. Use only the supplied or approved
antenna.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.
Google, Android and Google Play are trademarks of Google LLC.
Product specifications and app screens are subject to change without notice.
HP_JBL_TUNE BUDS_QSG_Global_SOP_V12
720202-019569
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>