Dessliy HDD21DKBR84DIY Base Lite Sliding Barn Door Instruction Manual
- October 30, 2023
- Dessliy
Table of Contents
BARN DOORS
KNOTTY PINE DIY BARN DOOR
Instructions for assembling
Email: support@dessliy.com
Side View
A – Middle Plank –| | E – Bottom Plank|
---|---|---|---
B – Left Outside Plank| | H – H Plank|
C – Right Outside Plank| | F – Central Plank|
D – Top Plank| | |
Size
DINGLE DOOR
DOUBLE DOOR
Tools Needed
Avoid
H3 Series
Please decide the appearance before assemble.
STEP 01: Parts Included
Remarks: The quantity of middle planks will vary depending on the size of the product.
STEP 02: Combine lower planks
The curved face of the plank should be up.
STEP 03 : Combine upper and lower planks
Once all planks are flush and square, secure the top and bottom planks with the screws provided. Using the clamps secure all 4 comers. With the pre- drilled holes as your guide, drill(1/8″bit) a shallow pilot hole into 4 corner holes. Do not drill completely through the door plank. Using a screwdriver insert screws into the 4 corner pre-drilled holes. Continue process with the remaining screws. Make sure all screws are installed and secure. it is important to check that all planks are still flush and square as you go.
Remarks: The quantity of screw holes and screws will vary depending on the size of the product.
STEP 04: Installing door and track
Screw holes door hangers are not pre-drilled on door. To install door hangers, you need to drill holes on your door.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>