Madeleine Home MH-SH-189 Denzil 70 Inch Natural and Brown 5 Shelf Ladder Bookcase Instructions
- October 30, 2023
- MADELEINE HOME
Table of Contents
Madeleine Home MH-SH-189 Denzil 70 Inch Natural and Brown 5 Shelf Ladder
Bookcase
Product Information
- Product Name: MH-SH-189
- Estimated Assembly + Installation Time: 15:00
- Number of People Required for Assembly: 2 or more
- Product Parts:
- A, B, C, D – Side Legs
- E, F, G, H, I – Shelf x5
- (L)-Bolt M6x18mm x20
- (M)-Bolt M8x18mm x4
- (N)-Screw 4×40 mm x4
- (O)-Wall Plug x4
Product Usage Instructions
- Put on mood music! To prevent damage to the product, use the clean side of package carton or rug as a working surface for assembly. In the event of missing or damaged parts, delivery problems, etc., please reach out to our team.
- Clean the product regularly with a soft and dry cloth. To protect the finish, avoid using abrasive cleaners. Wipe up spills immediately. While assembling the product, tighten the bolts up to 50%. Once all parts are in place, only then fully tighten the bolts.
- Follow the below steps for assembly:
- Attach the side legs together (A to B and C to D). To hold them in place, insert bolts (M) in the given holes. Tighten using the allen key(Q).
- Start by placing side leg (AB) on the floor. Align shelves (E,F, G, H, I) with any slots on the side leg. Once aligned, secure them in place using washer (J), lock washer (K), and bolt (L). Tighten all points using allen key (P).
- Insert side leg (CD) in the slots on shelves (E,F, G, H, I). Secure it in place using washer (J), lock washer (K), and bolt (L). Tighten all points using allen key (P).
- Follow the below steps for installation:
- Place the assembled shelf against the wall and put a spirit level on the top plank to check alignment. Adjust if needed. Have another person stand back to see if both the legs (AB, CD) are in level with the wall. Then, mark the top of the shelf on the wall.
- Drill holes on the points you just marked.
- Using a hammer, insert wall plugs (O) in the holes you just marked.
- Now, insert screws (N) and tighten completely with the help of a screwdriver.
- Voila! Your shelf is now assembled and secure!
Ok, let’s get started!
- Put on mood music!
- To prevent damage to product, use the clean side of package carton or rug as working surface for assembly.
- In the event of missing or damaged parts, delivery problems etc., please reach out to our team.
- We will be happy to fix the problem!
care guide
- Clean regularly with a soft and dry cloth.
- To protect finish, avoid use of abrasive cleaners.
- Wipe up spills immediately. Please!
While assembling the product, tighten the bolts up to 50%. Once all parts are in place, only then fully tighten the bolts.
product parts
what’s included
assembly instructions
Friendly Tip: Take a deep breath going in. This may be a tricky part, but
nothing too overwhelming. Just follow these steps to the T and the outcome
will be worth it!
While assembling the product, tighten the bolts up to 50%. Once all parts are
in place, only then fully tighten the bolts.
-
step 1:
Attach the side legs together (A to B and C to D). -
step 2:
To hold them in place, insert bolts (M) in the given holes. Tighten using the allen key(Q). -
step 3:
Start by placing side leg (AB) on the floor. Taking this image as reference, align shelves (E,F, G, H, I) with any slots on the side leg. -
step 4:
Once aligned, secure them in place using washer (J), lock washer (K), and bolt (L). Tighten all point using allen key (P). -
step 5:
Now, insert side leg (CD) in the slots on shelves (E,F, G, H, I). Secure it in place using washer (J), lock washer (K), and bolt (L). Tighten all point using allen key (P).
installation instructions
While assembling the product, tighten the bolts up to 50%. Once all parts are in place, only then fully tighten the bolts.
-
step 1:
Place the assembled shelf against the wall and put a spirit level on the top plank to check alignment. Adjust if needed. Have another person stand back to see if both the legs (AB, CD) are in level with the wall. Then, taking this image as reference, mark the top of the shelf on the wall. -
step 2:
Drill holes on the points you just marked. -
step 3:
Using a hammer, insert wall plugs (O) in the holes you just marked. -
step 4:
Now, insert screws (N) and tighten completely with the help of a screwdriver.
Voila! Your shelf is now assembled and secure!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>