blue beach 7ftX7ft, 9ftX9ft Slant LEG Canopy Owner’s Manual
- October 30, 2023
- blue beach
Table of Contents
blue beach 7ftX7ft, 9ftX9ft Slant LEG Canopy
WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
GENERAL SAFETY RULES
WARNING: Read and understand all instructions. Failure to follow all
instructions listed below may result in serious injury.
CAUTION: Do not allow persons to operate or assemble this canopy until
they have read this manual and have developed a thorough understanding of how
the canopy works.
WARNING: The warnings, cautions, and instructions discussed in this
instruction manual cannot cover all possible conditions or situations that
could occur. It must be understood by the operator that common sense and
caution are factors that cannot be built into this product, but must be
supplied by the operator.
SAVE THESE INSTRUCTIONS
DIAGRAM AND PARTS LIST
- Canopy frame(1pc)
- Top(1pc)
- Side wall(1pc)
- Backpack(1pc)
- Stake(8pc)
- Rope(4pc)
ASSEMBLY
STEP 1 – Verify package contents
Verify package contents by emptying contents of bag(s) and confirming all
parts are included and undamaged. Find the stakes in their pocket inside your
carry bag. Verify all contents before you set it up.
STEP 2 – Pull and extend the frame
STEP 3 – Cover the frame with fabric shell
- Lay the fabric over the roof.
- Line up all corners, adjusting from opposite sides. Fabric will fit snugly.
- Locate the nylon fasteners on the underside of fabric body, Attach to roof frame.
STEP 4 – Extend the legs
Step on frame leg base. Working from opposite sides, slide the roof lock
mechanisms (located on upper leg portion) upwards until they lock into place.
You will hear and feel a click when the roof lock is correctly secured at each
position.
STEP5 – Fixed side surround
Use the velcro tapes on the back to secure the panels onto the frame work.
STEP 6 – Stake canopy
DISASSEMBLY
STEP 1 – Remove the stakes
Carefully remove stakes by pulling out the hook ends. Remove excess soil from
the stakes and store them in their bag.
STEP 2 – Take down the canopy
- Remove any accessories if installed. Fold for storage.
- Press the push button located in the middle of each leg, and carefully lower each leg making sure all legs are level before proceeding. Repeat until frame is lowered to ground.
- Remember the fasteners are inside roof line, on side scissors bars, and at corners. Detach all fasteners and remove fabric completely off frame and fold for storing. NEVER STORE FABRIC ON FRAME. YOU MAY DAMAGE FABRIC, FRAME, OR BOTH.
- Press the push buttons found on each leg at each upper corner of frame, making sure that all sides are detached from snap button. Slowly slide roof line downward while walking in. This should collapse frame completely.
STEP 3 – Store in carry bag
- To prolong the life of your canopy, you will want to store it correctly. Please folded frame feet first toward carry bag wheels.
- Return stakes into their stake bag and place along side frame.
- Lastly, place folded fabric on top of frame legs, making sure all is completely tucked inside carry bag.
Ensure that you follow all instructions carefully to avoid personal injury or damage to the product.
WARNING:
Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before
operating. Failure to follow the safety rules another basic safety precautions
may result in serious personal injury
GENERAL SAFETY RULES
WARNING:
Read and understand all instructions. Failure to follow all instructions
listed below may result in serious injury.
CAUTION: Do not allow persons to operate or assemble this canopy until
they have read this manual and have developed a thorough understanding of how
the canopy works.
WARNING : The warnings, cautions, and instructions discussed in this
instruction manual cannot cover all possible conditions or situations that
could occur. It must be understood by the operator that common sense and
caution are factors that cannot be built into this product, but must be
supplied by the operator.
SAVE THESE INSTRUCTIONS
DIAGRAM AND PARTS LIST
ASSEMBLY
-
STEP 1: Verify package contents
Verify package contents by emptying contents of bag(s) and confirming all parts are includedandundamaged. NOTE: Find the stakes in their pocket inside your carry bag. Verify all contents before youset it up. STEP 2: Pull and extend the frame
NOTE : Find the stakes in their pocket inside your carry bag. Verify all contents before youset it up. -
STEP 2 : Pull and extend the frame
-
STEP 3 : Cover the frame with fabric shell
- A) Lay the fabric over the roof.
- B) Line up all corners, adjusting from opposite sides. Fabric will fit snugly
- C) Locate the nylon fasteners on the underside of fabric body, Attach to roof frame.
-
STEP 4 : Extend the legs
Step on frame leg base. Working from opposite sides, slide the roof lock mechanisms (locatedonupper leg portion) upwards until they lock into place. – TIP : You will hear and feel a click when the roof lock is correctly secured at each position -
STEP5: Fixed side surround
Use the velcro tapes on the back to secure the panels onto the frame work . -
STEP 6 : Stake canopy
DI SASSEMBLY
Store all poles and stakes in their corresponding bags to prevent possible
tearing or damage to the fabric.
-
STEP 1:Remove the stakes
Carefully remove stakes by pulling out the hook ends. Remove excess soil from the stakes and store them in their bag. -
STEP 2: Take down the canopy
- A) Remove any accessories if installed. Fold for storage.
- B) Press the push button located in the middle of each leg , and carefully lower each legmakingsure all legs are level before proceeding. Repeat until the frame is lowered to the ground.
- C) Remember the fasteners are inside roof line, on side scissors bars, and at corners. Detachable fasteners and remove fabric completely off the frame and fold for storing.
NEVER STORE FABRIC ON FRAME. YOU MAY DAMAGE FABRIC, FRAME, OR BOTH.
-
D) Press the push buttons found on each leg at each upper corner of the frame, making sure that all
sides are detached from snap button. Slowly slide roof line downward while walking. This should collapse the frame completely. -
STEP 3:Store in a carry bag
-
A) To prolong the life of your canopy, you will want to store it correctly. Please folded the frame“feet
first” toward carry bag wheels. -
B) Return stakes into their stake bag and place alongside frame
-
C) Lastly, place the folded fabric on top of frame legs, making sure all is completely tucked inside carry bag. Carefully zip carry bag closed.
Note: After fully packing the bag, double-check the bag contents and surrounding area for loose parts.
-
MAINTENANCE
- Maintain your canopy. It is recommended that the general condition of any canopy be examined before it is used. Keep your canopy in good repair by adopting a program of conscientious repair and maintenance. Have necessary repairs made by qualified service personnel.
- Store idle canopy. When canopy is not in use, store it inside, and in a secure place out of thereach of children. Inspect it for good working condition prior to storage and before re-use.
- Always check of damaged or worn out parts before using the canopy. Broken parts will
affect the canopy operation. Replace or repair damaged or worn parts immediately.
For replacement parts and technical questions, please contact our customer service.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>