hansgrohe METROPOL S Basin Mixer Instruction Manual
- October 30, 2023
- hansgrohe
Table of Contents
hansgrohe METROPOL S Basin Mixer
Product Information
The product is a shower system with the model name “Metropol S”. It comes in two variants – 14063XXX and 14263XXX. The product manual contains instructions in multiple languages including German, French, English, Italian, Spanish, Dutch, Danish, Polish, Chinese, Russian, Swedish, Lithuanian, Croatian, Turkish, Romanian, Greek, Slovenian, Estonian, Latvian, Serbian, Norwegian, and Bulgarian. The manual contains safety and installation instructions, dimensions, flow diagram, technical data, spare parts information, and special accessories.
Safety Notes
Gloves should be worn during installation to prevent crushing and cutting
injuries. The shower system may only be used for bathing, hygienic and body
cleansing purposes. The hot and cold supplies must be of equal pressures.
Installation Instructions
The product must be installed by following the instructions provided in the
manual. The installation process involves wearing protective gloves. The
shower system should only be used for bathing and body cleansing purposes. The
hot and cold supplies must have equal pressures. Silicone containing acetic
acid should not be used for installation. The product’s dimensions and flow
diagram are provided on page 34 of the manual. Cleaning instructions and
technical data are provided on pages 36 and 37 respectively. Spare parts
information is provided on page 37. The product can be used with hydraulically
and thermally controlled continuous flow heaters if the flow pressure is at
least 0.15 MPa.
Technical Data
- Operating pressure: max. 1 MPa
- Recommended operating pressure: 1.6 MPa
- Test pressure: 1.6 MPa
- Hot water temperature:
- Recommended hot water temp.:
Spare Parts
The spare parts for the product are provided on page 37 of the manual.
Special Accessories
- Special tool (58085000) order as an extra
- Installation kit order as an extra
- Test certificate (see page 38)
Assembly Instructions
The assembly instructions for the product are provided on page 31 of the
manual.
Safety Notes
- Gloves should be worn during installation to prevent crushing and cutting injuries.
- The shower system may only be used for bathing, hygienic and body cleansing purposes.
- The hot and cold supplies must be of equal pressures.
Installation Instructions
- The fitting must be installed, flushed and tested after the valid norms.
- If the instantaneous water heater causes problems or if you wish to increase the water flow, the EcoSmart® (flow limiter) located behind the aerator can be removed.
Technical Data
This mixer series-produced with EcoSmart® (flow limiter)
- limiter) Operating pressure: max. 1 MPa
- Recommended operating pressure: 0,1 – 0,5 MPa
- Test pressure: 1,6 MPa (1 MPa = 10 bar = 147 PSI)
- Hot water temperature: max. 80°C
- Recommended hot water temp.: 65°C
Hansgrohe mixers can be used together with hydraulically and thermically controlled continuous flow heaters if the flow pressure is at least 0,15 MPa.
Symbol description
- Do not use silicone containing acetic acid!
- Dimensions
- Flow diagram
- with EcoSmart
- without EcoSmart
- Operation
- Cleaning enclosed brochure
- Spare parts
- XXX = Colors
- 000 = chrome plated
- 880 = satin chrome
Special accessories
- special tool (58085000) order as an extra
- Installation kit order as an extra
- Test certificate
Assembly Procedure
Dimension
warm
o p e n
cold
c l o s e
Cleaning
The QuickClean cleaning function only needs a small manual rub over to remove the lime scale from the spray channels.
Parts
Hansgrohe · Postfach 1145 · D-77761 Schiltach · Telefon +49 (0) 78 36/51-1282
Telefax +49 (0) 7836/511440
E-Mail: info@hansgrohe.com
Internet: www.hansgrohe.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>