hansgrohe Metris S, Talis S2 Mixer Instruction Manual
- October 30, 2023
- hansgrohe
Table of Contents
- hansgrohe Metris S, Talis S2 Mixer
- Product Information
- Safety Notes
- Installation Instructions
- Technical Data
- Symbol Description
- Dimensions
- Flow diagram
- Spare parts
- Operation
- Cleaning
- Special accessories
- Test certificate
- Assembly
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
hansgrohe Metris S, Talis S2 Mixer
Product Information
The product is a shower system that can be used for bathing, hygienic, and body cleansing purposes. The shower system has a flow limiter that operates at a maximum pressure of 1 MPa and recommended operating pressure of 1.6 MPa. It comes with spare parts, cleaning recommendations, and special accessories that can be ordered separately. The installation kit is not included in the package.
Safety Notes
- Gloves should be worn during installation to prevent crushing and cutting injuries.
- The hot and cold supplies must be of equal pressure.
- Do not use silicone-containing acetic acid.
Technical Data
- Flow limiter
- Operating pressure: max. 1 MPa
- Recommended operating pressure: 1.6 MPa
- Hot water temperature:
- Recommended hot water temp.:
- Test pressure: 1.6 MPa (1 MPa = 10 bar = 147 PSI)
Symbol Description
The product comes with an adjustment feature to adjust the hot water limiter on single-lever mixers. Please refer to page 31 for instructions on how to adjust the hot water limiter. No adjustment is necessary when using a continuous-flow water heater.
Dimensions
The dimensions of the product can be found on page 34 and 35.
Flow Diagram
The flow diagram can be found on page 34 and 35.
Installation Instructions
- Wear gloves during installation to prevent crushing and cutting injuries.
- Compensate for differences in pressure between the hot and cold water supplies.
- Do not use silicone-containing acetic acid.
- Refer to page 32 for installation instructions.
Cleaning
For cleaning recommendations, refer to the enclosed brochure.
Special Accessories
Special accessories can be ordered separately. A special tool and installation kit are available as extras.
Test Certificate
The test certificate can be found on page 38.
Safety Notes
- Gloves should be worn during installation to prevent crushing and cutting injuries.
- The shower system may only be used for bathing, hygienic and body cleansing purposes.
- The hot and cold supplies must be of equal pressure.
Installation Instructions
- The fitting must be installed, flushed, and tested after the valid norms.
- If the instantaneous water heater causes problems or if you wish to increase the water flow, the EcoSmart® (flow limiter) located behind the aerator can be removed.
- Hansgrohe mixers can be used together with hydraulically and thermally controlled continuous flow heaters if the flow pressure is at least 0,15 MPa.
Technical Data
This mixer series-produced with EcoSmart® (flow limiter)
- Operating pressure: max. 1 MPa
- Recommended operating pressure: 0,1 – 0,5 MPa
- Test pressure: 1,6 MPa (1 MPa = 10 bar = 147 PSI)
- Hot water temperature: max. 80°C
- Recommended hot water temp.: 65°C
Symbol Description
Adjustment
To adjust the hot water limiter on single lever mixers, please see page 31. No
adjustment is necessary when using a continuous-flow water heater
Do not use silicone-containing acetic acid
Dimensions
Flow diagram
- with EcoSmart®
- without EcoSmart®
Spare parts
Operation
Cleaning
Cleaning recommendations, see enclosed brochure.
Special accessories
special tool order as an extra
Installation kit order as an extra
Test certificate
Assembly
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>