LAMA X205 7 Colors Backlit Keyboard Case with Mouse User Manual

LAMA X205 7 Colors Backlit Keyboard Case with Mouse

Keyboard Product Specifications

1. Bluelooth interface standard
2. Operating Distance: ,,10 meters
3. Modulation system: GFSK
4. Operotion Voltoge: 3.0-4.2V
5. Operation current: <2.5mA
6. Standby Current: <0.3mA
7. Sleeping Current: <40uA
8. Charging Current: > 200mA
9. Standby Time: < 100 days
10. Charging Time: 3 -4 hours
11. Battery Capacity: 150mA
12. Continuous Working Time: <2.5 hours (turn on the backlight) /100 hours (turn off the backlight)
13. Lithium Battery Life: 3 years
14. Key Strength: 80+-l0g
15. Key life: 5million strokes

Backlight Operation

Press Once: Turn on the backlight
Press Twice: Switch to breathing backlight mode
Press Three Times: Turn off the backlight

RGB Key:
Adjust rainbow backlight mode

Bluetooth Keyboard Connection Steps

1. To set the power button to “ON” position, the power indicator will light on for 4 seconds and then go off.

2. Long press the “Connect” button, the Bluetooth indicator will keep twinkling.
   The keyboard is ready to connect.

3. Click the “Settings”icon on your Samsung Tablet, and then click “Bluetooth”, and turn on the Bluetooth on your device.

4. Select “Bluetooth Keyboard” on your Samsung Tablet bluetooth interface. and click “Pair”, connection finished.

5. Your Samsung Tablet will connect automatically next time after first successful connection.

Mouse Product Specifications

1. Operating Distance: ≤10 meters
2. Input Voltage 5V, Current≤ 1A
3. Charging Time: 2-3 hours
4. Continuous Working Time: <120 hours (turn on the backlight) / 360 hours (turn off the backlight)

Connection Method of Dual Mode Mouse: Method

• Turn on the Bluetooth on your cellphone/iPad/tablet.
• Click”BT5.2 Mouse”.

Method 2:

• Switch the power button to “2.4G”
• Plug the USB receiver in your computer/laptop’s usb port and then use it.

Charging

When the battery is low, the power indicator light will keep flashing, that means you need to charge the Bluetooth keyboard.

1. Connect the USB end of the charging cable to the keyboard.
2. The “Charge” indicator will light on during charging, and when the batter is full of charge, the light will automatically goes out.

Caution

1. In order to extend the service life, we suggest you turn the keyboard off when there is no interactive for a long time.
2. We suggest you to recharge the keyboard only when the [Power] indicator light starts blinking. It’s better not less than 3 hours every time charging the keyboard.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>