Hisense U7QFTUK TV User Manual
- June 6, 2024
- Hisense
Table of Contents
Hisense U7QFTUK TV
Read the manual carefully and ensure you have fully understood its contents
before operating this device for the first time.
English
Important Safety Instructions
Important Notice
Paragraphs beginning with the symbol conditions for the following settings.
indicate important instructions, tips or
For your own safety and the optimal performance of your TV, ensure to read the safety instructions before performing any installation.
It is not guarantee operation and performance of peripheral devices made by
other manufacturers. We disclaim any liability or damage that may arise from
operation and/ or performance from usage of such other maker’s peripheral
devices.
The recording and playback of content on this or any other device may require
permission from the owner of the copyright or other such rights in that
content. It is your responsibility to ensure that your use of this or any
other device complies with applicable copyright legislation in your country.
Please refer to that legislation for more information on the relevant laws and
regulations involved or contact the owner of the rights of the content you
wish to record or playback.
The Index/Glossary explains certain terms used in this user manual and in the
TV menu.
Read these instructions Follow all instructions Heed all warnings Keep these
instructions All rights reserved.
Safety Instructions
To ensure safe and correct use of this product, always comply with the
following precautions to avoid dangerous situations and damage to your unit:
The lightning flash with arrowhead symbol, within an equilateral triangle is
intended to alert the user to the presence of uninsulated dangerous voltage
within the product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock.
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
AC voltage: This symbol indicates that the rated voltage marked with the
symbol is AC voltage.
Class II product : This symbol indicates that it does not require a safety
connection of protective earthing (ground).
A
Important Safety Instructions
The intended use and ambient conditions for this TV
This TV is intended for the rendering of video and audio signals, on a table-
top or wallmounted, in a home or office environment. It must not be used in
rooms with a high level of humidity or dust concentration. The warranty is
only valid if used as intended by the manufacturer.
WARNING
High humidity and dust concentration may lead to current leaks in the device.
To reduce the risk of fire or electrical shock: – Do not expose this unit to
rain, moisture, dripping or splashing water, and do
not place objects filled with liquids, such as vases, cups, etc. on or over
the unit. – Do not touch the TV with wet hands. – Do not expose to direct air-
conditioning and keep candles or other naked flames away from the TV at all
times. If the TV is moved from a cold environment to a hot environment, leave
it switched off for at least an hour to avoid condensation. If used outside,
make sure it is protected from moisture. If you notice anything unusual,
immediately remove the power plug. In case of fire, use preferably a CO2 gas
or powder fire extinguisher. If such extinguishers are not accessible, try to
isolate the electrical supply before using a water fire extinguisher.
WARNING Never place a television set in an unstable location. A television set
may fall, causing serious personal injury or death. Many injuries,
particularly to children, can
be avoided by taking simple precautions such as: – Using cabinets or stands
recommended by the manufacturer of the television
set. – Only using furniture that can safely support the television set. –
Ensuring the television set is not overhanging the edge of the supporting
furniture. – Not placing the television set on tall furniture (for example,
cupboards or
bookcases) without anchoring both the furniture and television set to a
suitable support. – Not placing the television set on cloth or other materials
that may be located between the television set and supporting furniture. –
Educating children about the dangers of climbing on furniture to reach the
television set or its controls. If your existing television set is being
retained and relocated, the same considerations as above should be applied.
B
Important Safety Instructions
Moving/Transportation
Power plug and power cable
Before moving this TV, disconnect all cables and move in the vertical position
only. Grasp the device on the upper and lower edges of the frame.
– Do not press or put stress on the front panel of the TV. It may take two or
more people to carry larger TVs.
If you have to briefly lay down the TV, place the unit with its entire front
surface lying flat on soft material.
The LED screen is made of glass and can break if is not handled properly.
Always wear rubber gloves to carry the unit. If the LED screen is damaged,
liquid crystal might leak out. In case of skin contact, immediately rinse
thoroughly with water.
Power Supply
Incorrect voltages can damage the TV. Only connect this unit to a power supply
with the correct voltage and frequency noted on the type plate, using the
supplied power cable.
The power plug must be easily accessible so that the device can be
disconnected at all time. The unit is live, even if in standby mode, as long
as the unit is connected to a power outlet.
It is recommended that this unit is placed on a dedicated circuit.
– Do not overload the power outlets by connect too many appliances to the same
outlet. Overloaded wall outlets, extension cords, etc. are dangerous and can
result in electric shock and fire.
After power off, don’t turn it on again in 5 seconds. Frequent switching power
supply in a short period of time can cause abnormal TV.
– Do not touch the power plug with wet hands.
– Do not place heavy objects on the power cable. Route the cable so that it is
not kinked or laid over sharp edges, walked on or exposed to chemicals. A
power cable with damaged insulation can cause electric shock and fire.
– Pull the power plug, NOT on the cable when disconnecting. The cable can
become damaged and cause a short circuit if pulled on.
– Do not place the power cable near a high temperature object.
– Do not move the TV with the power cable plugged into a socket.
– Do not use a damaged or loose power cable, or a damaged socket outlet.
– Do not use any power cords other than the one supplied with this unit.
Set-up
Check that the location is suitable to bear the load of the TV. Place on a
level, sturdy and horizontal base. Ensure that the unit does not hang over the
edge of the base when placed in or on furniture. If placed on a cart, use
caution when moving to avoid the unit from tipping over.
– Place the unit in a normal upright horizontal position. It must never be
operated vertically, lying flat or hanging overhead from the ceiling.
– Place the unit where it is not exposed to direct sunlight or other sources
of heat.
When mounting the TV on a wall, follow the instructions supplied with the
wallmount, make sure not to install the TV by hanging the power and signal
cables on the back of the TV.
C
Important Safety Instructions
Air ventilation and high temperatures
Install your TV only where there is proper ventilation, and ensure that there
is at least 10 cm free space on the sides and 20 cm above the unit for air
circulation. Excessive heat and obstruction of ventilation could lead to fire
or early failure of some electric components.
Prevent small items from getting into the interior of the device through the
ventilation slots. Such objects may cause short circuits, which may cause
fire. If something should get inside the unit, immediately unplug the power
plug of the device and contact service support.
The LED screen
– Do not block any ventilation openings with newspapers, tablecloths,
curtains, etc.
– Do not dry clothing etc. on top of the unit. – Take care not to touch the
ventilation
openings since they may become hot. – Do not insert foreign objects into the
TV
through the vents.
The Stand
– Do not use any stand other than the one supplied with this unit.
– Do not modify or use the stand if it becomes warped of physically damaged.
– During setup, make sure that all the screws are securely tightened.
– Ensure that the TV does not suffer any impact during the attachment of the
stand.
– Ensure that children do not climb onto the stand.
– Attach or remove the stand with at least two people.
20cm
10cm
10cm
10cm
Despite thorough care when manufacturing this display, it cannot be 100%
guaranteed that no sub-pixel defects will occur due to technical reasons.
These cannot be considered as a device defect in terms of the guarantee. They
will not affect the performance and reliability of the TV.
To prevent “image burn”, avoid displaying still images for long periods of
time, there is a possibility that a copy of the image may remain. If the
aspect ratio is set to 4:3 for a long period of time, image burn may occur on
the black areas. Image burn is not covered by the warranty.
– Do not apply strong force or impact on the display panel.
Avoid touching the LED screen or touching it for long periods of time. Doing
so may produce some temporary distortion effects on the screen.
Radio waves
– Do not use the TV in any medical institutions or locations with medical
equipment. Radio waves may interfere with medical equipment and cause
malfunction.
– Do not use the TV near any automatic control equipment such as automatic doors or fire alarms. Radio waves may interfere with automatic control equipment and cause malfunction.
D
Important Safety Instructions
If you have a cardiac pacemaker, keep a distance of at least 22 cm from the
TV. Radio waves may interfere with the operation of a pacemaker.
Built-in wireless LAN
– Do not connect to wireless networks that you do not have the usage rights
for. Data transmitted and received over radio waves may be intercepted and
monitored.
The built-in wireless LAN uses 2.4 GHz and 5 GHz frequency bands. To avoid
malfunctions or slow response caused by radio wave interference, keep the TV
away from devices such as other wireless LAN devices, microwaves, mobile
phones, and other devices that use 2.4 GHz and 5 GHz signal.
Supervision
– Do not let children play unsupervised close to the TV. It could tip over, be
pushed off or pulled down from the stand surface and injure someone.
– Do not allow a switched-on TV to run unattended.
Volume
Loud music and noises can lead to irreversible damage to your ears. Avoid
extreme volume, especially over long periods and when using headphones. If you
hear a drumming noise in your ears, turn down the volume or temporarily stop
using headphones.
Thunder Storms
Warning about off-gassing
New furniture, carpet, paint, building materials and electronics can release
chemicals into the air through evaporation. After you set your TV up and turn
it on for the first time, you may notice a slight smell within a couple of
hours. This is because some components of TV are heating up for the first
time. The materials that we use fully meet the environmental requirements and
regulations. Your TV is working just fine and the fumes from the off-gassing
will diminish eventually.
Pull out the power plug and all connected antenna cables from the TV during a
thunderstorm. Overvoltage caused by lightning strikes can damage the TV via
the antenna system, as well as the wall socket.
Long periods of absence
As long as the power plug is connected to a live socket outlet, the TV will
consume power even in standby mode. The power plug and all connected antenna
cables should be disconnected out during long periods of absence.
E
Important Safety Instructions
Cleaning and care
swallowed. If swallowed by mistake, force
the patient to vomit and visit the nearest
CAUTION:
hospital.
Unplug the power cord prior to cleaning the TV.
Modification
Clean the TV, the screen, and the remote control with a soft, moist, clean and
color-natural cloth only. Do not use any chemicals.
– Do not subject the surfaces to insect repellent, solvent, thinner or other
volatile substances. This may degrade the surface quality.
– Do not spray water or other liquids directly on the TV. Liquid inside the TV
could lead to product failure.
Do not attempt to modify this product in any way. Unauthorized modification
could void the warranty of this unit, cause electric shock and fires.
Remote Control batteries
– Incorrect installation may cause battery leakage, corrosion and explosion.
– Replace only with the same or equivalent type.
– The surface of the display panel is treated and may be easily damaged. Take
care not to scratch it with fingernails or other hard objects.
– Also wipe the power plug with a dry cloth at regular intervals.
– Do not mix old and new batteries. – Do not mix different battery types. – Do
no use rechargeable batteries. – Do not burn or break up batteries. – Be sure
to dispose of batteries
correctly.
Service/Repair
Never remove the cover/back of the TV; there are no user serviceable parts
inside. Refer all service to qualified service personnel.
Packaging
– Do not expose batteries to excessive heat such as sunshine, fire or the
like.
Outdoor Antenna Grounding
If an outdoor antenna used, be sure the antenna system is protected against
voltage surges and built-up static charges.
Keep the anti-moisture materials and plastic bags out of reach of children.
Plastic bags can cause suffocation and the anti-moisture material is harmful
if
Disposal
Refer to the recycling section of this manual.
F
Contents
Product image is only for reference, actual product may vary in appearance.
Parts of the software function changes with the system upgrade.
Contents
Accessories List………………………………………………………………………………………………..1 Installing the Stand
or Wall mount bracket ……………………………………………………………2 TV
Front…………………………………………………………………………………………………………..4 TV Rear
…………………………………………………………………………………………………………..5 Making Connections
………………………………………………………………………………………….6 Remote Control
………………………………………………………………………………………………..9 Turning the TV on for the First Time
…………………………………………………………………..13 Specifications
…………………………………………………………………………………………………14 Other
Information…………………………………………………………………………………………….16
Accessories List
The following accessories are included with TV:
User Manual × 1
Warranty Card × 1
Base Stand × 1
AAA Battery × 2
Power Cord × 1
Remote Control × 1 Screw × 4
NOTE
The accessories may be different from the list above due to different models,
countries / regions, please refer to the actual accessory bag.
SIMPLIFIED EU DECLARATION OF CONFORMITY Hereby, Hisense Czech s.r.o declares
that the radio equipment type [ERF3B72H/
ERF3A72/ERF3C72H/ERF3A70/ERF3C70H/50U7QF/50U71QF/50U72QF/ 50U7QFTUK/ 55U7QF/
55U71QF/ 55U72QF/ 55U7QFTUK/ 65U7QF/ 65U71QF/ 65U72QF/ 65U7QFTUK] is in
compliance with Directive 2014/53/EU. The full text of the EU declaration of
conformity is available at the following internet address: http://
global.hisense.com/downloads.
1
Installing the Stand or Wall mount bracket
Installing the Stand
CAUTION Be sure to disconnect the A/C power cord before installing a stand or
Wall-Mount brackets. The screen display is very fragile, and must be protected
at all times when installing the base stand. Be sure that no hard or sharp
object, or anything that could scratch or damage the screen display, comes
into contact with it. DO NOT exert pressure on the front of the TV at any time
because the screen could crack. After the installation is complete, make sure
the TV is steady on a table or firmly attached to a wall mount, before
removing all protective film, if any.
Follow the illustrations and textual instructions below to complete the
installation steps:
1. Carefully place your TV face-down on a soft, flat surface to prevent
damage to the TV or scratching to the screen.
2. Remove the Base Stand from the accessory bag and then insert the stands
into the bottom slots of the TV.
3. Secure the Base Stand to the TV with the screws in accessory tightly.
Screws (M5×12) × 4 (50″) (M5×12) × 4 (55″) (M5×12) × 4 (65″)
2
Base Stand
Installing the Stand or Wall mount bracket
Installing the wall mount bracket
Wall mount hole pattern (mm) Wall mount screw size (mm)
300 × 200 M6
9.5-11.5 mm Wall Mount Bracket
Rear cover of the TV
Wall Mount Screw Wall Mount Spacer
Follow instructions provided with the wall mount bracket.
NOTE · The diameter and length of the screws differ depending on the wall
mount bracket model. · Wall mount bracket is optional, your device may not
have wall mount bracket, please refer
to the actual accessories.
3
TV Front
TV Front
Single button (Remote sensor / Power indicator / Standby)
Item
Description
Remote sensor
Receive remote signals from the remote control. Do not put anything near the sensor, as its function may be affected.
Power indicator The light is red in standby mode.
Press the single button when in standby mode, TV will be turned on. Press the single button to call up the menu, when the focus is on “Power Off”, wait for 3 seconds, then the TV will go into standby mode automatically. Standby / Source / Press the single button to call up the menu and then select among the different input signal sources.
NOTES
The Picture is Only for Reference.
Powering on the TV requires several seconds to load programs. Do not rapidly
turn the TV off as it may cause the TV work abnormally.
4
TV Rear
TV Rear
COMMON INTERFACE
ANT 1 DVB-T/T2/C
ANT 2 DVB-S/S2
ARC
HDMI 1(4K@60Hz)
HDMI 2(4K@60Hz)
HDMI 3(4K@60Hz)
DIGITAL DC 5V 0.5A(MAX) DC 5V 0.5A(MAX) AUDIO OUT
USB 1
USB 2
AC Input
AV IN
R
L
VIDEO
SERVICE
LAN
HDMI 4(4K@60Hz)
NOTES ANT2 Jack supports power supply for satellite antenna (13/18V, 0.5A
max.) Check the jacks for position and type before making any connections.
Loose connections can result in image or color problems. Make sure that all
connections are tight and secure. Not all A/V devices have the ability to
connect to a TV, please refer to the user’s manual of your A/V device for
compatibility and connections procedure. Before connecting external equipment,
remove the mains plug from the wall socket. Otherwise, it may cause electric
shock. Service jack is not available for you to connect an external device. It
can only be used by our factory for testing purposes.
5
Making Connections
LAN (Wired setup)
Connect your TV to your network by connecting the LAN port on the back of your
TV to an external modem or router using a LAN (Ethernet/Cat 5) cable. See the
illustration below.
· We recommend to use a modem or router that supports Dynamic Host
Configuration Protocol (DHCP). Modems and routers that support DHCP
automatically provide the IP address, subnet mask, gateway, and DNS, so you
don’t have to enter them manually. Most home networks already have DHCP.
TV JACK
IP Sharer (Router) (with DHCP server)
External Modem (ADSL / VDSL / Cable TV)
LAN Cable
LAN Cable
Modem Cable
Wireless setup
Connect your TV to your network wirelessly, you need a wireless router or
modem. See the illustration below. · The built-in Wireless LAN Adapter
supports the IEEE 802.11a/b/g/n/ac
communication protocols. We recommend using IEEE 802.11n router. Low transfer
rates for b/g may have the influence on the quality of streamed videos and
other media.
Wireless router with DHCP
Wireless LAN Adapter built-in TV set
LAN Cable
NOTES
You must use the built-in Wireless LAN Adapter to use a wireless network
because the set doesn’t support external USB network adapter.
If the wireless router supports DHCP, your TV can connect more easily to the
wireless network.
If you apply a security system other than the systems listed below, it will
not work with the TV. Security system:WPA,WEP,WPA2.
In order to guarantee smooth network, the distance between router and TV
should be less than 10 meters.
6
ANT
Making Connections
ANT 1 DVB-T/T2/C
Outdoor Antenna
Cable
or
ANT OUT
Antenna Cable (75)
(not included)
VHF/UHF Antenna
ANT 2 DVB-S/S2
(not included)
Satellite antenna
DIGITAL AUDIO OUT
HDMI (ARC) HDMI
HDMI
DIGITAL AUDIO OUT
HDMI ARC
HDMI
Audio Amplifier/Speaker DIGITAL AUDIO cable (not included)
HDMI cable (not included) HDMI cable (not included)
Audio Amplifier/Speaker
HDMI
DVD/Blu-Ray/AV receiver/ Set-top Box
HDMI
AV IN
AV IN
R
L VIDEO
Yellow(Video) White(L) Red(R)
(Cables are not included)
VCR/DVD Player/ Recorder/Set-top box/
Satellite Receiver/ Video Camera
A/V OUT
Video L
R
7
Making Connections
2
CAM CARD
1
SMART CARD
COMMON INTERFACE
USB
NOTES Before you insert/remove the CI+ module, ensure that the TV is switched
off. Then insert the CI card into the CI+ module in accordance with the
Service Provider’s instructions. Do not repeatedly insert or remove the Common
Access Module as this may damage the interface and cause a malfunction. You
must obtain a CI+ module and card from the service provider of the channels
you want to watch. Insert the CI+ module with the SmartCard in the direction
marked on the module and SmartCard. CI+ is not supported in some countries and
regions; check with your authorized dealer.
USB
DC 5V 0.5A(MAX)
NOTES When connecting a hard disk or a USB hub, always connect the mains
adapter of the connected device to the power supply. Exceeding a total current
consumption may result in damage. The USB1.1 and USB2.0 devices maximum
current consumption are 500mA. For individual non-standard high-capacity
mobile hard disk, if its impulse current is greater than or equal 1A, it may
cause TV-rebooting or self-locking. So the TV does not support it. The USB
port supports a voltage of 5V.
8
Remote Control
1 POWER: Switch the TV on or into standby
22
mode
1
2 2 INPUT: Select input sources
3
3 TEXT: Turn on/off the teletext function
4 Number button: Direct channel selection or numbers input
4
5 GUIDE: Display the Electronic Program Guide (DTV mode)
6 CH.List: Display the Channel List on the
screen
5
6
7 Special function buttons
7
8 Display the Quick setup menu
9 Media content control function button
8
9 10 / / < / >: Allows you to navigate the OSD
10
menus and adjust the system settings to your
preference
11
11 OK: Confirm the selection in the OSD menus
12 Return to previous menu
12
13 13 EXIT: Exit the menu
14
14 HOME: Enter the Smart
15
16 15 VOL / : Adjust the volume
16 CH / : Switch channel
17
18
17 MUTE: Mute or restore the TV sound
19
20
18 Quick access button to the app
: All Apps
21
19 Quick access button to the app
Media: Enter the media mode
20 Voice command
21 NOTE: The information here will vary depending on the remote control model.
Quick access buttons to apps
22 Receive the voice Bluetooth remote control module specifications
WNF171 Frequency Range: 2.402~2.480GHz Output Power(Max.): +4.5dBm
NOTE: The included remote control will vary depending on model, country. Check
information according to the
actual remote control in the accessory bag.
9
Remote Control
1 POWER: Switch the TV on or into standby
mode
23
2 INPUT: Select input sources
1
2
3
3 INFO: Display the present program information
4
5 4 All Apps
5 Custom button to launch input or apps quickly
6 Number button: Direct channel selection or numbers input
6
7 GUIDE: Display the Electronic Program Guide
(DTV mode)
8 CH.List: Display the Channel List on the
screen
7
8
9 Display the Quick setup menu
9
10 10 Special function buttons
11 / / < / >: Allows you to navigate the OSD
11
menus and adjust the system settings to your
12
preference
12 OK: Confirm the selection in the OSD menus
13
14 13 Return to previous menu
15
14 Media content control function button
16
17 15 HOME: Enter the Smart
18 16 VOL / : Adjust the volume
19
20 17 CH / : Switch channel
21
18 MUTE: Mute or restore the TV sound
19 TXT: Turn on/off the teletext function
22
20 Sub.: Activate or deactivate the subtitle mode
21 Voice command
22 NOTE: The information here will vary depending on the remote control model.
App: Quick access buttons to apps
Media: Enter the media mode
23 Receive the voice
Bluetooth remote control module specifications
WNF150 Frequency Range: 2.402~2.480GHz Output Power(Max.): +4dBm
NOTE: The included remote control will vary depending on model, country. Check
information according to the actual remote control in the accessory bag.
10
Remote Control
1 POWER: Switch the TV on or into standby mode
1
2 2 INPUT: Select input sources
3
3 INFO: Display the present program information
4
5 4 All Apps
5 Custom button to launch input or apps quickly
6 Number button: Direct channel selection or numbers input
6
7 GUIDE: Display the Electronic Program Guide
(DTV mode)
8 CH.List: Display the Channel List on the
screen
7
8
9 Display the Quick setup menu
9
10 10 Special function buttons
11 / / < / >: Allows you to navigate the OSD
11
menus and adjust the system settings to your
12
preference
12 OK: Confirm the selection in the OSD menus
13
14 13 Return to previous menu
15
14 Media content control function button
16
17 15 HOME: Enter the Smart
18 16 VOL / : Adjust the volume
19
20 17 CH / : Switch channel
21
18 MUTE: Mute or restore the TV sound
22
19 TXT: Turn on/off the teletext function
20 Sub.: Activate or deactivate the subtitle mode
21 P.Mode: Picture Mode button
22 NOTE: The information here will vary depending on the remote control model.
App: Quick access buttons to apps
Media: Enter the media mode
NOTE: The included remote control will vary depending on model, country. Check
information according to the actual remote control in the accessory bag.
11
Remote Control
Installing Batteries in the Remote Control 1. Slide the back cover to open the
battery compartment of the remote control.
2. Insert two AAA size batteries. Make sure to match the (+) and ( – ) ends
of the batteries with the (+) and ( – ) ends indicated in the battery
compartment.
3. Close the battery compartment with the cover.
NOTES Product image is only for reference, actual product may vary in
appearance. Handling the Batteries Incorrect use of batteries may cause
corrosion or battery leakage, which could cause fire, personal injury or
damage to property. Only use the battery type indicated in this manual Do not
mix old and new batteries or different types of batteries . Do not dispose of
used batteries as domestic waste. Dispose of them in accordance with local
regulations.
Remote Control Operation Range
12
Turning the TV on for the First Time
Turning the TV on for the First Time
1. Connect the mains cable to the mains socket after you have completed all
the connections.
2. The first time you turn the TV on, it will go straight into the
Installation Guide. 3. Press the [ / / < / >] buttons to navigate the menu and
change the settings.
Press the [OK] button to confirm.
Language TV Mode
Wireless Network
Country Time Zone
End User License Agreement
Enhance Viewing
VIDAA Account Setup Screen
Select your desired language to be displayed on the menu.
Select “Home Mode” or “Store Mode”.
If your TV does not automatically detect an Ethernet connection, then use a
wireless network, select your network from the list that displays, also you
can add a hidden network. When you’re done, move to the next screen.
Select the Country where you will operate the TV.
Select the local time zone according to your region.
Your use of this device is subject to the End User License Agreement, lack of
your acceptance of the End User License Agreement will turn off all smart
features of this device. You can choose to turn on/off each type of smart
features separately, a click to the box of each type of smart feature means
you give your consent to the corresponding privacy notice/terms and
conditions.
Enhanced viewing can automatically adjust the picture mode and sound mode so
as to match with the current content displayed on this device in case it is
recognized by the automatic content recognition service. (This function is
only applicable in certain models/countries.)
Link your TV with VIDAA account.
13
Specifications
Features, appearance and specifications are subject to change without notice.
Item
50″
55″
Dimension (W × H × D)
Without Stand With Stand
43.8 × 25.4 × 3.1 inches (1112 × 645 × 79 mm)
43.8 × 27.7 × 9.8 inches (1112 × 704 × 250 mm)
48.3 × 28.0 × 3.1 inches (1227 × 711 × 78 mm)
48.3 × 30.3 × 9.8 inches (1227 × 770 × 250 mm)
Weight
Without Stand 28.2 lbs (12.8 kg)
With Stand
28.9 lbs (13.1 kg)
32.4 lbs (14.7 kg) 34.0 lbs (15.4 kg)
Active Screen Size (Diagonal) 126 cm
139 cm
Screen resolution
3840 × 2160
3840 × 2160
Audio power
10W + 10W
10 W + 10 W
Operating mode power density 0.028 Watts/cm² Power consumption when turned off < 0.5 W Power consumption in standby mode 0.5 W
0.027 Watts/cm²
Item
65″
Dimension (W × H × D)
Without Stand With Stand
57.0 × 32.9 × 3.1 inches (1447 × 835 × 79 mm)
57.0 × 35.3 × 10.6 inches (1447 × 897 × 270 mm)
Weight
Without Stand 43.0 lbs (19.5 kg)
With Stand
44.1 lbs (20.0 kg)
Active Screen Size (Diagonal) 164 cm
Screen resolution
3840 × 2160
Audio power
10 W + 10 W
Operating mode power density 0.025 Watts/cm²
Power consumption when turned off < 0.5 W
Power consumption in standby mode 0.5 W
Power consumption
Please refer to the rating label.
Power supply
Please refer to the rating label.
Receiving systems
Analog Digital
PAL-D/K, B/G, I, SECAM-D/K, B/G DVB-T/T2, DVB-C, DVB-S/S2
14
Specifications
Model
Frequency Range
Wireless LAN Module specifications Output Power
(Max.)
Model
Bluetooth Module
Frequency Range
specifications Output Power
(Max.)
Environmental conditions
HDMI Input
ZDGF7668AU-F 2.4~2.4835GHz 5.15~5.85GHz
2.4~2.4835GHz 17dBm
5.15~5.25GHz 15dBm
5.25~5.35GHz (DFS Band)
14dBm
5.49~5.71GHz (DFS/TPC Band) 13dBm
5.725~5.85GHz (for Non EU) 13dBm
ZDGF7668AU-F
2.4~2.4835GHz
2.4~2.4835GHz, Class1, 5dBm
Temperature: 41°F – 95°F (5°C – 35°C) Humidity: 20% – 80% RH Atmospheric
pressure: 86 kPa – 106 kPa
RGB / 60 Hz (640×480, 800×600, 1024×768) YUV / 60 Hz (480 I, 480 P, 720 P,
1080 I, 1080 P) YUV / 50Hz (576 I, 576 P, 720 P, 1080 I, 1080 P) 3840×2160 /
24Hz, 3840×2160 / 25Hz 3840×2160 / 30Hz, 3840×2160 / 50Hz 3840×2160 / 60Hz
15
Other Information
Recycling/Licenses
WEEE (Waste Electronic Electric Equipment) European Directive 2012/19/EU
This symbol on the product or on its packaging indicates that this product
must not be disposed of with your household waste. Instead, it is your
responsibility to dispose of your waste equipment by handing it over to a
designated collection point for the recycling of waste electrical and
electronic equipment. The separate collection and recycling of your waste
equipment at the time of disposal will help to conserve natural resources and
ensure that it is recycled in a manner that protects human health and the
environment. For more information about where you can drop off your waste
equipment for recycling, please contact your local city office, your household
waste disposal service or the shop where you purchased the product.
Batteries
In accordance with the Battery Directive, used batteries should not be disposed of in the domestic waste. Dispose your batteries in the collection containers specific for this purpose in retail stores.
ROHS (Restriction of Hazardous Substance) European Directive 2011/65/EU
This European directive limits the use of dangerous and hazardous substances
which are difficult to recycle. This allows recycling easily the EEE and
contributes to the safeguard of the environment. Substances included in this
product match to the RoHS directive.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI
Logo are trademarks or registered trademarks of HDMI Licensing Administrator,
Inc. in the United States and other countries.
Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, Dolby
Atmos, Dolby Vision, and the double-D symbol are trademarks of Dolby
Laboratories. Confidential unpublished works. Copyright © 2012-2019 Dolby
Laboratories. All rights reserved.
16
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>