hansgrohe 14111XXX Talis Classic Basin Water Mixer Instruction Manual
- October 30, 2023
- hansgrohe
Table of Contents
- Safety Notes
- Installation Instructions
- Technical Data
- Symbol description
- Special accessories
- Assembly
- Operating Instruction
- Dimensions
- Flow diagram
- Operation
- Cleaning
- Spare parts
- Test certificate
- Other Models
- Customer Service
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
hansgrohe 14111XXX Talis Classic Basin Water Mixer
Safety Notes
Gloves should be worn during installation to prevent crushing and cutting injuries.
The shower system may only be used for bathing, hygienic and body cleansing purposes.
The hot and cold supplies must be of equal pressures.
Installation Instructions
- The fitting must be installed, flushed and tested after the valid norms.
- If the instantaneous water heater causes problems or if you wish to increase the water flow, the EcoSmart® (flow limiter) located behind the aerator can be removed.
Technical Data
This mixer series-produced with EcoSmart® (flow limiter)
Operating pressure: max. 1 MPa
Recommended operating pressure: 0,1 – 0,5 MPa
Test pressure: 1,6 MPa
(1 MPa = 10 bar = 147 PSI)
Hot water temperature: max. 80°C
Recommended hot water temp.: 65°C
Hansgrohe mixers can be used together with hydraulically and thermically controlled continuous flow heaters if the flow pressure is at least 0,15 MPa.
Symbol description
To adjust the hot water limiter on single lever mixers, please see page 33. No adjustment is necessary when using a continuous flow water heater.
| Do not use silicone containing acetic acid!
---|---
Special accessories
special tool (58085000) order as an extra
| Installation kit order as an extra
---|---
Assembly
Operating Instruction
Dimensions
Talis Classic 14111XXX
Talis Classic 14116XXX
Talis Classic 14118XXX
Flow diagram
➀ with EcoSmart®
➁ without EcoSmart®
Talis Classic
14111XXX / 14118XXX
Talis Classic
14116XXX
Talis Classic 14120XXX
Talis Classic
14120XXX
Operation
-
open
-
close
-
cold
-
hot
Cleaning
The QuickClean cleaning function only needs a small manual rub over to remove
the lime scale from the spray channels.
Spare parts
Test certificate
| P-IX| DVGW| SVGW| WRAS| KIWA| NF| ACS|
ETA
---|---|---|---|---|---|---|---|---
14111XXX| P-IX 18845/IA| X| X| X| | | X| X
14116XXX| P-IX 18845/IA| X| X| X| | | X| X
14118XXX| P-IX 18845/IA| X| X| X| | | X| X
14120XXX| P-IX 18845/IA| X| X| | | | X|
Other Models
Talis Classic
14116XXX
Talis Classic
14120XXX
Customer Service
Hansgrohe · Postfach 1145 · D-77761 Schiltach · Telefon +49 (0) 78 36/51-1282
· Telefax +49 (0) 7836/511440
E-Mail: info@hansgrohe.com · Internet:
www.hansgrohe.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>